Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch Fix up bcm283[56] bus_space(4) to really use bus ad...
details: https://anonhg.NetBSD.org/src/rev/49a1866aa427
branches: trunk
changeset: 343408:49a1866aa427
user: skrll <skrll%NetBSD.org@localhost>
date: Tue Feb 02 13:55:50 2016 +0000
description:
Fix up bcm283[56] bus_space(4) to really use bus addresses for
peripherals, etc
Simplifies the code in various places and uses the abstraction in
more places. (bcm2835_gpio_subr.c still doesn't)
diffstat:
sys/arch/arm/broadcom/bcm2835_emmc.c | 15 +++-----
sys/arch/arm/broadcom/bcm2835_gpio.c | 21 ++++++++----
sys/arch/arm/broadcom/bcm2835_gpio_subr.c | 10 +++--
sys/arch/arm/broadcom/bcm2835_pwm.c | 11 +++---
sys/arch/arm/broadcom/bcm2835_space.c | 23 ++++++++++---
sys/arch/arm/broadcom/bcm2835reg.h | 51 ++++++++++++++----------------
sys/arch/evbarm/rpi/rpi_machdep.c | 17 +++-------
7 files changed, 78 insertions(+), 70 deletions(-)
diffs (truncated from 379 to 300 lines):
diff -r 0cf4f12e19af -r 49a1866aa427 sys/arch/arm/broadcom/bcm2835_emmc.c
--- a/sys/arch/arm/broadcom/bcm2835_emmc.c Tue Feb 02 13:07:30 2016 +0000
+++ b/sys/arch/arm/broadcom/bcm2835_emmc.c Tue Feb 02 13:55:50 2016 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: bcm2835_emmc.c,v 1.28 2015/08/09 13:06:44 mlelstv Exp $ */
+/* $NetBSD: bcm2835_emmc.c,v 1.29 2016/02/02 13:55:50 skrll Exp $ */
/*-
* Copyright (c) 2012 The NetBSD Foundation, Inc.
@@ -30,7 +30,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: bcm2835_emmc.c,v 1.28 2015/08/09 13:06:44 mlelstv Exp $");
+__KERNEL_RCSID(0, "$NetBSD: bcm2835_emmc.c,v 1.29 2016/02/02 13:55:50 skrll Exp $");
#include "bcmdmac.h"
@@ -60,6 +60,7 @@
bus_space_tag_t sc_iot;
bus_space_handle_t sc_ioh;
+ bus_addr_t sc_iob;
bus_size_t sc_ios;
struct sdhc_host *sc_hosts[1];
void *sc_ih;
@@ -73,8 +74,6 @@
bus_dmamap_t sc_dmamap;
bus_dma_segment_t sc_segs[1]; /* XXX assumes enough descriptors fit in one page */
struct bcm_dmac_conblk *sc_cblk;
-
- uint32_t sc_physaddr;
};
static int bcmemmc_match(device_t, struct cfdata *, void *);
@@ -137,8 +136,8 @@
"can't map registers for %s: %d\n", aaa->aaa_name, error);
return;
}
+ sc->sc_iob = aaa->aaa_addr;
sc->sc_ios = aaa->aaa_size;
- sc->sc_physaddr = aaa->aaa_addr;
aprint_naive(": SDHC controller\n");
aprint_normal(": SDHC controller\n");
@@ -267,8 +266,7 @@
sc->sc_cblk[seg].cb_ti |= DMAC_TI_DEST_WIDTH;
sc->sc_cblk[seg].cb_ti |= DMAC_TI_SRC_DREQ;
sc->sc_cblk[seg].cb_source_ad =
- BCM2835_PERIPHERALS_TO_BUS(sc->sc_physaddr +
- SDHC_DATA);
+ sc->sc_iob + SDHC_DATA;
sc->sc_cblk[seg].cb_dest_ad =
cmd->c_dmamap->dm_segs[seg].ds_addr;
} else {
@@ -284,8 +282,7 @@
sc->sc_cblk[seg].cb_source_ad =
cmd->c_dmamap->dm_segs[seg].ds_addr;
sc->sc_cblk[seg].cb_dest_ad =
- BCM2835_PERIPHERALS_TO_BUS(sc->sc_physaddr +
- SDHC_DATA);
+ sc->sc_iob + SDHC_DATA;
}
sc->sc_cblk[seg].cb_stride = 0;
if (seg == cmd->c_dmamap->dm_nsegs - 1) {
diff -r 0cf4f12e19af -r 49a1866aa427 sys/arch/arm/broadcom/bcm2835_gpio.c
--- a/sys/arch/arm/broadcom/bcm2835_gpio.c Tue Feb 02 13:07:30 2016 +0000
+++ b/sys/arch/arm/broadcom/bcm2835_gpio.c Tue Feb 02 13:55:50 2016 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: bcm2835_gpio.c,v 1.2 2014/05/19 08:33:41 skrll Exp $ */
+/* $NetBSD: bcm2835_gpio.c,v 1.3 2016/02/02 13:55:50 skrll Exp $ */
/*-
* Copyright (c) 2014 The NetBSD Foundation, Inc.
@@ -30,7 +30,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: bcm2835_gpio.c,v 1.2 2014/05/19 08:33:41 skrll Exp $");
+__KERNEL_RCSID(0, "$NetBSD: bcm2835_gpio.c,v 1.3 2016/02/02 13:55:50 skrll Exp $");
/*
* Driver for BCM2835 GPIO
@@ -101,9 +101,11 @@
{
struct bcmgpio_softc * const sc = device_private(self);
#if NGPIO > 0
+ struct amba_attach_args *aaa = aux;
+ struct gpiobus_attach_args gba;
int pin, minpin, maxpin;
u_int func;
- struct gpiobus_attach_args gba;
+ int error;
#endif
sc->sc_dev = self;
@@ -124,10 +126,15 @@
aprint_naive("\n");
aprint_normal(": GPIO [%d...%d]\n", minpin, maxpin);
- /* already mapped - nothing to gain from struct amba_attach_args */
- sc->sc_iot = &bcm2835_bs_tag;
- sc->sc_ioh = BCM2835_IOPHYSTOVIRT(BCM2835_GPIO_BASE);
-
+ sc->sc_iot = aaa->aaa_iot;
+ error = bus_space_map(sc->sc_iot, aaa->aaa_addr, aaa->aaa_size, 0,
+ &sc->sc_ioh);
+ if (error) {
+ aprint_error_dev(self,
+ "can't map registers for %s: %d\n", aaa->aaa_name, error);
+ return;
+ }
+
for (pin = minpin; pin <= maxpin; pin++) {
int epin = pin - minpin;
diff -r 0cf4f12e19af -r 49a1866aa427 sys/arch/arm/broadcom/bcm2835_gpio_subr.c
--- a/sys/arch/arm/broadcom/bcm2835_gpio_subr.c Tue Feb 02 13:07:30 2016 +0000
+++ b/sys/arch/arm/broadcom/bcm2835_gpio_subr.c Tue Feb 02 13:55:50 2016 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: bcm2835_gpio_subr.c,v 1.3 2014/04/22 18:51:35 kardel Exp $ */
+/* $NetBSD: bcm2835_gpio_subr.c,v 1.4 2016/02/02 13:55:50 skrll Exp $ */
/*
* Copyright (c) 2013 Jonathan A. Kollasch
@@ -27,7 +27,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: bcm2835_gpio_subr.c,v 1.3 2014/04/22 18:51:35 kardel Exp $");
+__KERNEL_RCSID(0, "$NetBSD: bcm2835_gpio_subr.c,v 1.4 2016/02/02 13:55:50 skrll Exp $");
#include <sys/param.h>
#include <sys/device.h>
@@ -43,8 +43,9 @@
void
bcm2835gpio_function_select(u_int pin, u_int func)
{
+ const paddr_t iop = BCM2835_PERIPHERALS_BUS_TO_PHYS(BCM2835_GPIO_BASE);
const bus_space_tag_t iot = &bcm2835_bs_tag;
- const bus_space_handle_t ioh = BCM2835_IOPHYSTOVIRT(BCM2835_GPIO_BASE);
+ const bus_space_handle_t ioh = BCM2835_IOPHYSTOVIRT(iop);
const u_int mask = (1 << BCM2835_GPIO_GPFSEL_BITS_PER_PIN) - 1;
const u_int regid = (pin / BCM2835_GPIO_GPFSEL_PINS_PER_REGISTER);
const u_int shift = (pin % BCM2835_GPIO_GPFSEL_PINS_PER_REGISTER) *
@@ -70,8 +71,9 @@
u_int
bcm2835gpio_function_read(u_int pin)
{
+ const paddr_t iop = BCM2835_PERIPHERALS_BUS_TO_PHYS(BCM2835_GPIO_BASE);
const bus_space_tag_t iot = &bcm2835_bs_tag;
- const bus_space_handle_t ioh = BCM2835_IOPHYSTOVIRT(BCM2835_GPIO_BASE);
+ const bus_space_handle_t ioh = BCM2835_IOPHYSTOVIRT(iop);
const u_int mask = (1 << BCM2835_GPIO_GPFSEL_BITS_PER_PIN) - 1;
const u_int regid = (pin / BCM2835_GPIO_GPFSEL_PINS_PER_REGISTER);
const u_int shift = (pin % BCM2835_GPIO_GPFSEL_PINS_PER_REGISTER) *
diff -r 0cf4f12e19af -r 49a1866aa427 sys/arch/arm/broadcom/bcm2835_pwm.c
--- a/sys/arch/arm/broadcom/bcm2835_pwm.c Tue Feb 02 13:07:30 2016 +0000
+++ b/sys/arch/arm/broadcom/bcm2835_pwm.c Tue Feb 02 13:55:50 2016 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: bcm2835_pwm.c,v 1.1 2015/11/21 07:41:29 mlelstv Exp $ */
+/* $NetBSD: bcm2835_pwm.c,v 1.2 2016/02/02 13:55:50 skrll Exp $ */
/*-
* Copyright (c) 2015 The NetBSD Foundation, Inc.
@@ -37,7 +37,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: bcm2835_pwm.c,v 1.1 2015/11/21 07:41:29 mlelstv Exp $");
+__KERNEL_RCSID(0, "$NetBSD: bcm2835_pwm.c,v 1.2 2016/02/02 13:55:50 skrll Exp $");
#include "bcmdmac.h"
@@ -67,12 +67,11 @@
bus_space_tag_t sc_iot;
bus_space_handle_t sc_ioh;
+ bus_addr_t sc_iob;
int sc_clockrate;
struct bcm_pwm_channel sc_channels[2];
kmutex_t sc_lock;
-
- uint32_t sc_physaddr;
};
#define PWM_WRITE(sc, reg, val) \
@@ -114,7 +113,7 @@
sc->sc_dev = self;
sc->sc_iot = aaa->aaa_iot;
- sc->sc_physaddr = aaa->aaa_addr;
+ sc->sc_iob = aaa->aaa_addr;
if (bus_space_map(aaa->aaa_iot, aaa->aaa_addr, BCM2835_PWM_SIZE, 0,
&sc->sc_ioh)) {
@@ -336,6 +335,6 @@
{
struct bcm2835pwm_softc *sc = pwm->sc;
- return BCM2835_PERIPHERALS_TO_BUS(sc->sc_physaddr + PWM_FIFO);
+ return sc->sc_iob + PWM_FIFO;
}
diff -r 0cf4f12e19af -r 49a1866aa427 sys/arch/arm/broadcom/bcm2835_space.c
--- a/sys/arch/arm/broadcom/bcm2835_space.c Tue Feb 02 13:07:30 2016 +0000
+++ b/sys/arch/arm/broadcom/bcm2835_space.c Tue Feb 02 13:55:50 2016 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: bcm2835_space.c,v 1.9 2015/12/19 08:27:01 skrll Exp $ */
+/* $NetBSD: bcm2835_space.c,v 1.10 2016/02/02 13:55:50 skrll Exp $ */
/*-
* Copyright (c) 2012 The NetBSD Foundation, Inc.
@@ -31,7 +31,7 @@
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: bcm2835_space.c,v 1.9 2015/12/19 08:27:01 skrll Exp $");
+__KERNEL_RCSID(0, "$NetBSD: bcm2835_space.c,v 1.10 2016/02/02 13:55:50 skrll Exp $");
#include <sys/param.h>
#include <sys/systm.h>
@@ -290,11 +290,24 @@
vaddr_t va;
const struct pmap_devmap *pd;
int pmap_flags;
-
+ bool match = false;
/* Attempt to find the PA device mapping */
- pa = ba;
- if ((pd = pmap_devmap_find_pa(ba, size)) != NULL) {
+ if (ba >= BCM2835_PERIPHERALS_BASE_BUS &&
+ ba < BCM2835_PERIPHERALS_BASE_BUS + BCM2835_PERIPHERALS_SIZE) {
+ match = true;
+ pa = BCM2835_PERIPHERALS_BUS_TO_PHYS(ba);
+
+ }
+#ifdef BCM2836
+ if (ba >= BCM2836_ARM_LOCAL_BASE &&
+ ba < BCM2836_ARM_LOCAL_BASE + BCM2836_ARM_LOCAL_SIZE) {
+ match = true;
+ pa = ba;
+ }
+#endif
+
+ if (match && (pd = pmap_devmap_find_pa(pa, size)) != NULL) {
/* Device was statically mapped. */
*bshp = pd->pd_va + (pa - pd->pd_pa);
return 0;
diff -r 0cf4f12e19af -r 49a1866aa427 sys/arch/arm/broadcom/bcm2835reg.h
--- a/sys/arch/arm/broadcom/bcm2835reg.h Tue Feb 02 13:07:30 2016 +0000
+++ b/sys/arch/arm/broadcom/bcm2835reg.h Tue Feb 02 13:55:50 2016 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: bcm2835reg.h,v 1.17 2015/12/17 08:31:50 skrll Exp $ */
+/* $NetBSD: bcm2835reg.h,v 1.18 2016/02/02 13:55:50 skrll Exp $ */
/*-
* Copyright (c) 2012 The NetBSD Foundation, Inc.
@@ -46,29 +46,32 @@
#define BCM2835_PERIPHERALS_BASE 0x20000000
#endif
#define BCM2835_PERIPHERALS_SIZE 0x01000000 /* 16MBytes */
+
#define BCM2835_PERIPHERALS_BASE_BUS 0x7e000000
-#define BCM2835_PERIPHERALS_TO_BUS(a) \
+#define BCM2835_PERIPHERALS_PHYS_TO_BUS(a) \
((a) - BCM2835_PERIPHERALS_BASE + BCM2835_PERIPHERALS_BASE_BUS)
+#define BCM2835_PERIPHERALS_BUS_TO_PHYS(a) \
+ ((a) - BCM2835_PERIPHERALS_BASE_BUS + BCM2835_PERIPHERALS_BASE)
-#define BCM2835_STIMER_BASE (BCM2835_PERIPHERALS_BASE + 0x00003000)
-#define BCM2835_DMA0_BASE (BCM2835_PERIPHERALS_BASE + 0x00007000)
-#define BCM2835_ARM_BASE (BCM2835_PERIPHERALS_BASE + 0x0000B000)
-#define BCM2835_PM_BASE (BCM2835_PERIPHERALS_BASE + 0x00100000)
-#define BCM2835_CM_BASE (BCM2835_PERIPHERALS_BASE + 0x00101000)
-#define BCM2835_RNG_BASE (BCM2835_PERIPHERALS_BASE + 0x00104000)
-#define BCM2835_GPIO_BASE (BCM2835_PERIPHERALS_BASE + 0x00200000)
-#define BCM2835_UART0_BASE (BCM2835_PERIPHERALS_BASE + 0x00201000)
-#define BCM2835_PCM_BASE (BCM2835_PERIPHERALS_BASE + 0x00203000)
-#define BCM2835_SPI0_BASE (BCM2835_PERIPHERALS_BASE + 0x00204000)
-#define BCM2835_BSC0_BASE (BCM2835_PERIPHERALS_BASE + 0x00205000)
-#define BCM2835_PWM_BASE (BCM2835_PERIPHERALS_BASE + 0x0020C000)
-#define BCM2835_BSCSPISLV_BASE (BCM2835_PERIPHERALS_BASE + 0x00214000)
-#define BCM2835_AUX_BASE (BCM2835_PERIPHERALS_BASE + 0x00215000)
-#define BCM2835_EMMC_BASE (BCM2835_PERIPHERALS_BASE + 0x00300000)
-#define BCM2835_BSC1_BASE (BCM2835_PERIPHERALS_BASE + 0x00804000)
-#define BCM2835_BSC2_BASE (BCM2835_PERIPHERALS_BASE + 0x00805000)
-#define BCM2835_USB_BASE (BCM2835_PERIPHERALS_BASE + 0x00980000)
-#define BCM2835_DMA15_BASE (BCM2835_PERIPHERALS_BASE + 0x00E05000)
+#define BCM2835_STIMER_BASE (BCM2835_PERIPHERALS_BASE_BUS + 0x00003000)
+#define BCM2835_DMA0_BASE (BCM2835_PERIPHERALS_BASE_BUS + 0x00007000)
+#define BCM2835_ARM_BASE (BCM2835_PERIPHERALS_BASE_BUS + 0x0000B000)
+#define BCM2835_PM_BASE (BCM2835_PERIPHERALS_BASE_BUS + 0x00100000)
+#define BCM2835_CM_BASE (BCM2835_PERIPHERALS_BASE_BUS + 0x00101000)
+#define BCM2835_RNG_BASE (BCM2835_PERIPHERALS_BASE_BUS + 0x00104000)
+#define BCM2835_GPIO_BASE (BCM2835_PERIPHERALS_BASE_BUS + 0x00200000)
+#define BCM2835_UART0_BASE (BCM2835_PERIPHERALS_BASE_BUS + 0x00201000)
+#define BCM2835_PCM_BASE (BCM2835_PERIPHERALS_BASE_BUS + 0x00203000)
Home |
Main Index |
Thread Index |
Old Index