[src/trunk]: src/share/man/man4 PR/52848: Brad Spencer: Man pages for new dri...

[christos <christos%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/7c3ca2ac0982
branches:  trunk
changeset: 358429:7c3ca2ac0982
user:      christos <christos%NetBSD.org@localhost>
date:      Thu Dec 28 23:28:00 2017 +0000

description:
PR/52848: Brad Spencer: Man pages for new drivers

diffstat:

 share/man/man4/Makefile     |  11 ++---
 share/man/man4/am2315temp.4 |  90 +++++++++++++++++++++++++++++++++++++++++++++
 share/man/man4/si70xxtemp.4 |  88 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 183 insertions(+), 6 deletions(-)

diffs (216 lines):

diff -r 58cc806f94e8 -r 7c3ca2ac0982 share/man/man4/Makefile
--- a/share/man/man4/Makefile   Thu Dec 28 23:24:30 2017 +0000
+++ b/share/man/man4/Makefile   Thu Dec 28 23:28:00 2017 +0000
@@ -1,12 +1,11 @@
-#      $NetBSD: Makefile,v 1.647 2017/12/19 01:46:57 christos Exp $
+#      $NetBSD: Makefile,v 1.648 2017/12/28 23:28:00 christos Exp $
 #      @(#)Makefile    8.1 (Berkeley) 6/18/93
 
 MAN=   aac.4 ac97.4 acardide.4 aceride.4 acphy.4 \
        adbbt.4 adbkbd.4 adbms.4 \
        adc.4 adm1026hm.4 admtemp.4 adv.4 adw.4 age.4 agp.4 agr.4 ahb.4 ahc.4 \
-       ahcisata.4 ahd.4 \
-       aibs.4 alc.4 ale.4 alipm.4 altmem.4 altq.4 amdpm.4 amdtemp.4 amhphy.4 \
-       amr.4 aps.4 asus.4 \
+       ahcisata.4 ahd.4 \ aibs.4 alc.4 ale.4 alipm.4 altmem.4 altq.4 \
+       am2315temp.4 amdpm.4 amdtemp.4 amhphy.4 amr.4 aps.4 asus.4 \
        an.4 arcmsr.4 arcofi.4 aria.4 artsata.4 ata.4 atalk.4 ataraid.4 \
        ath.4 athn.4 atphy.4 atppc.4 attimer.4 atw.4 \
        auacer.4 audio.4 audiocs.4 auich.4 \
@@ -57,8 +56,8 @@
        rnd.4 route.4 rs5c372rtc.4 rtk.4 rtsx.4 rtw.4 rtwn.4 rum.4 run.4 \
        s390rtc.4 satalink.4 sbus.4 schide.4 \
        scsi.4 sd.4 se.4 seeprom.4 sem.4 \
-       ses.4 sf.4 sfb.4 sgsmix.4 shb.4 shmif.4 \
-       shpcic.4 siisata.4 siop.4 sip.4 siside.4 sk.4 sl.4 slide.4 \
+       ses.4 sf.4 sfb.4 sgsmix.4 shb.4 shmif.4 shpcic.4 si70xxtemp.4 \
+       siisata.4 siop.4 sip.4 siside.4 sk.4 sl.4 slide.4 \
        sm.4 smsh.4 sn.4 sony.4 spc.4 speaker.4 spif.4 sqphy.4 ss.4 \
        st.4 ste.4 stge.4 sti.4 stpcide.4 sv.4 strip.4 \
        svwsata.4 swsensor.4 swwdog.4 sysmon.4 \
diff -r 58cc806f94e8 -r 7c3ca2ac0982 share/man/man4/am2315temp.4
--- /dev/null   Thu Jan 01 00:00:00 1970 +0000
+++ b/share/man/man4/am2315temp.4       Thu Dec 28 23:28:00 2017 +0000
@@ -0,0 +1,90 @@
+.\" $NetBSD: am2315temp.4,v 1.1 2017/12/28 23:28:00 christos Exp $
+.\"
+.\" Copyright (c) 2017 Brad Spencer <brad%anduin.eldar.org@localhost>
+.\"
+.\" Permission to use, copy, modify, and distribute this software for any
+.\" purpose with or without fee is hereby granted, provided that the above
+.\" copyright notice and this permission notice appear in all copies.
+.\"
+.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+.\"
+.Dd December 28, 2017
+.Dt AM2315TEMP 4
+.Os
+.Sh NAME
+.Nm am2315temp
+.Nd Driver for Aosong AM2315 sensor chip via I2C bus
+.Sh SYNOPSIS
+.Cd "am2315temp* at iic? addr 0x5c"
+.Sh DESCRIPTION
+The
+.Nm
+driver provides measurements from the AM2315 humidity/temperature
+sensors via the
+.Xr envsys 4
+framework.
+The
+.Nm
+.Ar addr
+argument selects the address at the
+.Xr iic 4
+bus.  The AM2315 has limits on how often the measurements can be read.
+Adjustments to the number of times to take reading before considering
+it valid, and the number of ticks to wait between readings can be
+changed through
+.Xr sysctl 8
+nodes.
+.Pp
+There are other oddities about the AM2315 that should be mentioned.
+The datasheet says that the device should read no more often then
+every 2 seconds, further, it also implies that a measurement is not
+performed until the device is 1) awake 2) has been asked for a
+measurement.  From observation, it has been noted that it is possible
+to ask for measurements more often than every 2 seconds, and actually
+get something that looks to be valid.  It may, in fact, be valid, but
+it has also been noted that the measurements do not appear to change.
+This implies that a measurement was done, and then returned time and
+time again.  It has also been noticed that if measurements are taken
+very close to every 2 seconds, that sometimes the device will return a
+I2C error on a read.  If this happens a lot, increase
+hw.am2315temp0.readticks a bit.
+.Sh SYSCTL VARIABLES
+The following
+.Xr sysctl 3
+variables are provided:
+.Bl -tag -width indent
+.It hw.am2315temp0.readcount
+The number of times to take a reading before considering it valid.  This defaults to 2.
+.It hw.am2315temp0.readticks
+The number of ticks to wait in between readings.  The default is 100.
+.It hw.am2315temp0.debug
+If the driver is compiled with AM2315_DEBUG, this node will appear and
+can be used to set the debugging level.
+.El
+.Sh SEE ALSO
+.Xr envsys 4 ,
+.Xr iic 4 ,
+.Xr envstat 8 ,
+.Xr sysctl 8
+.Sh HISTORY
+The
+.Nm
+driver first appeared in
+.Nx 8.0 .
+.Sh AUTHORS
+.An -nosplit
+The
+.Nm
+driver was written by
+.An Brad Spencer Aq Mt brad%anduin.eldar.org@localhost .
+.Sh BUGS
+The device does not appear to work with the
+.Xr gpioiic 4
+bitbang controller.  When tried, reads would not error, but no data
+was returned.
diff -r 58cc806f94e8 -r 7c3ca2ac0982 share/man/man4/si70xxtemp.4
--- /dev/null   Thu Jan 01 00:00:00 1970 +0000
+++ b/share/man/man4/si70xxtemp.4       Thu Dec 28 23:28:00 2017 +0000
@@ -0,0 +1,88 @@
+.\" $NetBSD: si70xxtemp.4,v 1.1 2017/12/28 23:28:00 christos Exp $
+.\"
+.\" Copyright (c) 2017 Brad Spencer <brad%anduin.eldar.org@localhost>
+.\"
+.\" Permission to use, copy, modify, and distribute this software for any
+.\" purpose with or without fee is hereby granted, provided that the above
+.\" copyright notice and this permission notice appear in all copies.
+.\"
+.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+.\"
+.Dd December 28, 2017
+.Dt SI70XXTEMP 4
+.Os
+.Sh NAME
+.Nm si70xxtemp
+.Nd Driver for Silicon Labs SI7013/SI7020/SI7021 and HTU21D sensor chip via I2C bus
+.Sh SYNOPSIS
+.Cd "si70xxtemp* at iic? addr 0x40"
+.Sh DESCRIPTION
+The
+.Nm
+driver provides measurements from the SI7013/SI7020/SI7021 humidity/temperature
+sensors via the
+.Xr envsys 4
+framework.
+The
+.Nm
+.Ar addr
+argument selects the address at the
+.Xr iic 4
+bus.
+The resolution, heater control and crc validity can be changed through
+.Xr sysctl 8
+nodes.
+.Sh SYSCTL VARIABLES
+The following
+.Xr sysctl 3
+variables are provided:
+.Bl -tag -width indent
+.It hw.si70xxtemp0.resolutions
+Lists the resolutions supported by the driver and chip.
+.It hw.si70xxtemp0.resolution
+Set the resolution, or number of bits, used for %RH and temperature.
+Use one of the strings listed in hw.si70xxtemp.resolutions.
+.It hw.si70xxtemp0.ignorecrc
+If set, the crc calculation for %RH and temperature will be ignored.
+.It hw.si70xxtemp0.vddok
+If 1, the chip is getting enough power.
+.It hw.si70xxtemp0.heateron
+Turn the heater on and off.
+.It hw.si70xxtemp0.heaterstrength
+From 1 to 6, the amount of energy put into the heater.  The higher the
+number, the more power used.
+.It hw.si70xxtemp0.debug
+If the driver is compiled with SI70XX_DEBUG, this node will appear and
+can be used to set the debugging level.
+.It hw.si70xxtemp0.readattempts
+To read %RH or temperature the driver uses a No Hold Master command.
+This command needs to be sent to the device, a wait must then occur
+and then another read command is sent to read back the values.
+Depending on the resolution, and other factors, the wait time varies.
+The driver will attempt to read back the values readattempts number of
+times.  The default is 15 which should be more than enough for most
+purposes.  There is an intial wait of 10,500 microseconds followed by
+a additional 1,000 microseconds per read attempt.
+.El
+.Sh SEE ALSO
+.Xr envsys 4 ,
+.Xr iic 4 ,
+.Xr envstat 8 ,
+.Xr sysctl 8
+.Sh HISTORY
+The
+.Nm
+driver first appeared in
+.Nx 8.0 .
+.Sh AUTHORS
+.An -nosplit
+The
+.Nm
+driver was written by
+.An Brad Spencer Aq Mt brad%anduin.eldar.org@localhost .