[src/trunk]: src/lib/libc/sys Markup improvements: use Dv for kqueue filters, ...

[abhinav <abhinav%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/ee131b92aa52
branches:  trunk
changeset: 450400:ee131b92aa52
user:      abhinav <abhinav%NetBSD.org@localhost>
date:      Fri Apr 12 10:57:27 2019 +0000

description:
Markup improvements: use Dv for kqueue filters, events and note names

ok wiz@

diffstat:

 lib/libc/sys/kqueue.2 |  64 +++++++++++++++++++++++++-------------------------
 1 files changed, 32 insertions(+), 32 deletions(-)

diffs (208 lines):

diff -r 9f5c58344161 -r ee131b92aa52 lib/libc/sys/kqueue.2
--- a/lib/libc/sys/kqueue.2     Fri Apr 12 09:29:26 2019 +0000
+++ b/lib/libc/sys/kqueue.2     Fri Apr 12 10:57:27 2019 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: kqueue.2,v 1.47 2018/01/09 03:31:12 christos Exp $
+.\"    $NetBSD: kqueue.2,v 1.48 2019/04/12 10:57:27 abhinav Exp $
 .\"
 .\" Copyright (c) 2000 Jonathan Lemon
 .\" All rights reserved.
@@ -198,31 +198,31 @@
 .Va flags
 field can contain the following values:
 .Bl -tag -width XXXEV_ONESHOT -offset indent
-.It EV_ADD
+.It Dv EV_ADD
 Adds the event to the kqueue.
 Re-adding an existing event will modify the parameters of the original
 event, and not result in a duplicate entry.
 Adding an event automatically enables it,
 unless overridden by the EV_DISABLE flag.
-.It EV_ENABLE
+.It Dv EV_ENABLE
 Permit
 .Fn kevent
 to return the event if it is triggered.
-.It EV_DISABLE
+.It Dv EV_DISABLE
 Disable the event so
 .Fn kevent
 will not return it.
 The filter itself is not disabled.
-.It EV_DISPATCH
+.It Dv EV_DISPATCH
 Disable the event source immediately after delivery of an event.
 See
 .Dv EV_DISABLE
 above.
-.It EV_DELETE
+.It Dv EV_DELETE
 Removes the event from the kqueue.
 Events which are attached to file descriptors are automatically deleted
 on the last close of the descriptor.
-.It EV_RECEIPT
+.It Dv EV_RECEIPT
 This flag is useful for making bulk changes to a kqueue without draining
 any pending events.
 When passed as input, it forces
@@ -231,18 +231,18 @@
 When a filter is successfully added the
 .Va data
 field will be zero.
-.It EV_ONESHOT
+.It Dv EV_ONESHOT
 Causes the event to return only the first occurrence of the filter
 being triggered.
 After the user retrieves the event from the kqueue, it is deleted.
-.It EV_CLEAR
+.It Dv EV_CLEAR
 After the event is retrieved by the user, its state is reset.
 This is useful for filters which report state transitions
 instead of the current state.
 Note that some filters may automatically set this flag internally.
-.It EV_EOF
+.It Dv EV_EOF
 Filters may set this flag to indicate filter-specific EOF condition.
-.It EV_ERROR
+.It Dv EV_ERROR
 See
 .Sx RETURN VALUES
 below.
@@ -263,14 +263,14 @@
 to map a filter name to a filter number, and vice-versa (passing
 arguments in a structure described below):
 .Bl -tag -width KFILTER_BYFILTER -offset indent
-.It KFILTER_BYFILTER
+.It Dv KFILTER_BYFILTER
 Map
 .Va filter
 to
 .Va name ,
 which is of size
 .Va len .
-.It KFILTER_BYNAME
+.It Dv KFILTER_BYNAME
 Map
 .Va name
 to
@@ -297,7 +297,7 @@
 .Pp
 The predefined system filters are:
 .Bl -tag -width EVFILT_SIGNAL
-.It EVFILT_READ
+.It Dv EVFILT_READ
 Takes a descriptor as the identifier, and returns whenever
 there is data available to read.
 The behavior of the filter is slightly different depending
@@ -350,7 +350,7 @@
 filter will resume waiting for data to become available before
 returning.
 .El
-.It EVFILT_WRITE
+.It Dv EVFILT_WRITE
 Takes a descriptor as the identifier, and returns whenever
 it is possible to write to the descriptor.
 For sockets, pipes, fifos, and ttys,
@@ -362,7 +362,7 @@
 .Pp
 For sockets, the low water mark and socket error handling is
 identical to the EVFILT_READ case.
-.It EVFILT_AIO
+.It Dv EVFILT_AIO
 This is not implemented in
 .Nx .
 .ig
@@ -391,26 +391,26 @@
 However, this approach will not work on
 architectures with 64-bit pointers, and should be considered deprecated.
 ..
-.It EVFILT_VNODE
+.It Dv EVFILT_VNODE
 Takes a file descriptor as the identifier and the events to watch for in
 .Va fflags ,
 and returns when one or more of the requested events occurs on the descriptor.
 The events to monitor are:
 .Bl -tag -width XXNOTE_RENAME
-.It NOTE_DELETE
+.It Dv NOTE_DELETE
 .Xr unlink 2
 was called on the file referenced by the descriptor.
-.It NOTE_WRITE
+.It Dv NOTE_WRITE
 A write occurred on the file referenced by the descriptor.
-.It NOTE_EXTEND
+.It Dv NOTE_EXTEND
 The file referenced by the descriptor was extended.
-.It NOTE_ATTRIB
+.It Dv NOTE_ATTRIB
 The file referenced by the descriptor had its attributes changed.
-.It NOTE_LINK
+.It Dv NOTE_LINK
 The link count on the file changed.
-.It NOTE_RENAME
+.It Dv NOTE_RENAME
 The file referenced by the descriptor was renamed.
-.It NOTE_REVOKE
+.It Dv NOTE_REVOKE
 Access to the file was revoked via
 .Xr revoke 2
 or the underlying file system was unmounted.
@@ -419,7 +419,7 @@
 On return,
 .Va fflags
 contains the events which triggered the filter.
-.It EVFILT_PROC
+.It Dv EVFILT_PROC
 Takes the process ID to monitor as the identifier and the events to watch for
 in
 .Va fflags ,
@@ -427,18 +427,18 @@
 If a process can normally see another process, it can attach an event to it.
 The events to monitor are:
 .Bl -tag -width XXNOTE_TRACKERR
-.It NOTE_EXIT
+.It Dv NOTE_EXIT
 The process has exited.
 The exit code of the process is stored in
 .Va data .
-.It NOTE_FORK
+.It Dv NOTE_FORK
 The process has called
 .Xr fork 2 .
-.It NOTE_EXEC
+.It Dv NOTE_EXEC
 The process has executed a new process via
 .Xr execve 2
 or similar call.
-.It NOTE_TRACK
+.It Dv NOTE_TRACK
 Follow a process across
 .Xr fork 2
 calls.
@@ -448,7 +448,7 @@
 .Va fflags
 and the parent PID in
 .Va data .
-.It NOTE_TRACKERR
+.It Dv NOTE_TRACKERR
 This flag is returned if the system was unable to attach an event to
 the child process, usually due to resource limitations.
 .El
@@ -456,7 +456,7 @@
 On return,
 .Va fflags
 contains the events which triggered the filter.
-.It EVFILT_SIGNAL
+.It Dv EVFILT_SIGNAL
 Takes the signal number to monitor as the identifier and returns
 when the given signal is delivered to the current process.
 This coexists with the
@@ -472,7 +472,7 @@
 returns the number of times the signal has occurred since the last call to
 .Fn kevent .
 This filter automatically sets the EV_CLEAR flag internally.
-.It EVFILT_TIMER
+.It Dv EVFILT_TIMER
 Establishes an arbitrary timer identified by
 .Va ident .
 When adding a timer,