Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/netbsd-9]: src/sys/dev/pci Pull up following revision(s) (requested by m...
details: https://anonhg.NetBSD.org/src/rev/c984201e72b3
branches: netbsd-9
changeset: 453117:c984201e72b3
user: martin <martin%NetBSD.org@localhost>
date: Fri Aug 09 16:03:13 2019 +0000
description:
Pull up following revision(s) (requested by msaitoh in ticket #36):
sys/dev/pci/if_et.c: revision 1.25
sys/dev/pci/if_et.c: revision 1.26
sys/dev/pci/if_etreg.h: revision 1.2
sys/dev/pci/if_etreg.h: revision 1.3
Avoid undefined behavior when reset the chip. found by kUBSan.
Add missing ifioctl_common() for SIOCSIFFLAGS to make if_flags controllable.
Make et(4) work:
- Enabling TX/RX in et_init() will always fail when cable is not plugged in,
if this happens, we delay TX/RX enablement until link is up. From FreeBSD.
- Modify flow control stuff a little (from FrerBSD). It still doesn't work.
- KNF. Part of OpenBSD 1.12.
diffstat:
sys/dev/pci/if_et.c | 198 +++++++++++++++++++++++++++++++++---------------
sys/dev/pci/if_etreg.h | 10 +-
2 files changed, 143 insertions(+), 65 deletions(-)
diffs (truncated from 445 to 300 lines):
diff -r 5283dd9403cc -r c984201e72b3 sys/dev/pci/if_et.c
--- a/sys/dev/pci/if_et.c Fri Aug 09 15:59:52 2019 +0000
+++ b/sys/dev/pci/if_et.c Fri Aug 09 16:03:13 2019 +0000
@@ -1,5 +1,5 @@
-/* $NetBSD: if_et.c,v 1.24 2019/05/28 07:41:49 msaitoh Exp $ */
-/* $OpenBSD: if_et.c,v 1.11 2008/06/08 06:18:07 jsg Exp $ */
+/* $NetBSD: if_et.c,v 1.24.2.1 2019/08/09 16:03:13 martin Exp $ */
+/* $OpenBSD: if_et.c,v 1.12 2008/07/11 09:29:02 kevlo $ */
/*
* Copyright (c) 2007 The DragonFly Project. All rights reserved.
*
@@ -37,7 +37,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: if_et.c,v 1.24 2019/05/28 07:41:49 msaitoh Exp $");
+__KERNEL_RCSID(0, "$NetBSD: if_et.c,v 1.24.2.1 2019/08/09 16:03:13 martin Exp $");
#include "opt_inet.h"
#include "vlan.h"
@@ -83,17 +83,19 @@
int et_match(device_t, cfdata_t, void *);
void et_attach(device_t, device_t, void *);
-int et_detach(device_t, int flags);
+int et_detach(device_t, int);
int et_shutdown(device_t);
int et_miibus_readreg(device_t, int, int, uint16_t *);
int et_miibus_writereg(device_t, int, int, uint16_t);
void et_miibus_statchg(struct ifnet *);
-int et_init(struct ifnet *ifp);
+int et_init(struct ifnet *);
int et_ioctl(struct ifnet *, u_long, void *);
void et_start(struct ifnet *);
void et_watchdog(struct ifnet *);
+static int et_ifmedia_upd(struct ifnet *);
+static void et_ifmedia_sts(struct ifnet *, struct ifmediareq *);
int et_intr(void *);
void et_enable_intrs(struct et_softc *, uint32_t);
@@ -131,7 +133,6 @@
int et_start_txdma(struct et_softc *);
int et_stop_rxdma(struct et_softc *);
int et_stop_txdma(struct et_softc *);
-int et_enable_txrx(struct et_softc *);
void et_reset(struct et_softc *);
int et_bus_config(struct et_softc *);
void et_get_eaddr(struct et_softc *, uint8_t[]);
@@ -190,6 +191,7 @@
const char *intrstr;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
struct mii_data * const mii = &sc->sc_miibus;
+ uint32_t pmcfg;
pcireg_t memtype;
int error;
char intrbuf[PCI_INTRSTR_LEN];
@@ -234,6 +236,9 @@
sc->sc_pct = pa->pa_pc;
sc->sc_pcitag = pa->pa_tag;
+ if (pa->pa_id == PCI_PRODUCT_LUCENT_ET1301)
+ sc->sc_flags |= ET_FLAG_FASTETHER;
+
error = et_bus_config(sc);
if (error)
goto fail;
@@ -243,8 +248,11 @@
aprint_normal_dev(self, "Ethernet address %s\n",
ether_sprintf(sc->sc_enaddr));
- CSR_WRITE_4(sc, ET_PM,
- ET_PM_SYSCLK_GATE | ET_PM_TXCLK_GATE | ET_PM_RXCLK_GATE);
+ /* Take PHY out of COMA and enable clocks. */
+ pmcfg = ET_PM_SYSCLK_GATE | ET_PM_TXCLK_GATE | ET_PM_RXCLK_GATE;
+ if ((sc->sc_flags & ET_FLAG_FASTETHER) == 0)
+ pmcfg |= EM_PM_GIGEPHY_ENB;
+ CSR_WRITE_4(sc, ET_PM, pmcfg);
et_reset(sc);
@@ -273,8 +281,7 @@
mii->mii_statchg = et_miibus_statchg;
sc->sc_ethercom.ec_mii = mii;
- ifmedia_init(&mii->mii_media, 0, ether_mediachange,
- ether_mediastatus);
+ ifmedia_init(&mii->mii_media, 0, et_ifmedia_upd, et_ifmedia_sts);
mii_attach(self, mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, 0);
if (LIST_FIRST(&mii->mii_phys) == NULL) {
aprint_error_dev(self, "no PHY found!\n");
@@ -450,31 +457,117 @@
{
struct et_softc *sc = ifp->if_softc;
struct mii_data *mii = &sc->sc_miibus;
- uint32_t cfg2, ctrl;
+ uint32_t cfg1, cfg2, ctrl;
+ int i;
+ sc->sc_flags &= ~ET_FLAG_LINK;
+ if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
+ (IFM_ACTIVE | IFM_AVALID)) {
+ switch (IFM_SUBTYPE(mii->mii_media_active)) {
+ case IFM_10_T:
+ case IFM_100_TX:
+ sc->sc_flags |= ET_FLAG_LINK;
+ break;
+ case IFM_1000_T:
+ if ((sc->sc_flags & ET_FLAG_FASTETHER) == 0)
+ sc->sc_flags |= ET_FLAG_LINK;
+ break;
+ }
+ }
+
+ /* XXX Stop TX/RX MAC? */
+ if ((sc->sc_flags & ET_FLAG_LINK) == 0)
+ return;
+
+ /* Program MACs with resolved speed/duplex/flow-control. */
+ ctrl = CSR_READ_4(sc, ET_MAC_CTRL);
+ ctrl &= ~(ET_MAC_CTRL_GHDX | ET_MAC_CTRL_MODE_MII);
+ cfg1 = CSR_READ_4(sc, ET_MAC_CFG1);
+ cfg1 &= ~(ET_MAC_CFG1_TXFLOW | ET_MAC_CFG1_RXFLOW |
+ ET_MAC_CFG1_LOOPBACK);
cfg2 = CSR_READ_4(sc, ET_MAC_CFG2);
cfg2 &= ~(ET_MAC_CFG2_MODE_MII | ET_MAC_CFG2_MODE_GMII |
- ET_MAC_CFG2_FDX | ET_MAC_CFG2_BIGFRM);
+ ET_MAC_CFG2_FDX | ET_MAC_CFG2_BIGFRM);
cfg2 |= ET_MAC_CFG2_LENCHK | ET_MAC_CFG2_CRC | ET_MAC_CFG2_PADCRC |
- __SHIFTIN(7, ET_MAC_CFG2_PREAMBLE_LEN);
+ __SHIFTIN(7, ET_MAC_CFG2_PREAMBLE_LEN);
- ctrl = CSR_READ_4(sc, ET_MAC_CTRL);
- ctrl &= ~(ET_MAC_CTRL_GHDX | ET_MAC_CTRL_MODE_MII);
- if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) {
+ if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T)
cfg2 |= ET_MAC_CFG2_MODE_GMII;
- } else {
+ else {
cfg2 |= ET_MAC_CFG2_MODE_MII;
ctrl |= ET_MAC_CTRL_MODE_MII;
}
- if ((mii->mii_media_active & IFM_FDX) != 0)
+ if (IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) {
cfg2 |= ET_MAC_CFG2_FDX;
- else
+ /*
+ * Controller lacks automatic TX pause frame
+ * generation so it should be handled by driver.
+ * Even though driver can send pause frame with
+ * arbitrary pause time, controller does not
+ * provide a way that tells how many free RX
+ * buffers are available in controller. This
+ * limitation makes it hard to generate XON frame
+ * in time on driver side so don't enable TX flow
+ * control.
+ */
+#ifdef notyet
+ if (IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_TXPAUSE)
+ cfg1 |= ET_MAC_CFG1_TXFLOW;
+#endif
+ if (IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_RXPAUSE)
+ cfg1 |= ET_MAC_CFG1_RXFLOW;
+ } else
ctrl |= ET_MAC_CTRL_GHDX;
CSR_WRITE_4(sc, ET_MAC_CTRL, ctrl);
CSR_WRITE_4(sc, ET_MAC_CFG2, cfg2);
+ cfg1 |= ET_MAC_CFG1_TXEN | ET_MAC_CFG1_RXEN;
+ CSR_WRITE_4(sc, ET_MAC_CFG1, cfg1);
+
+#define NRETRY 100
+
+ for (i = 0; i < NRETRY; ++i) {
+ cfg1 = CSR_READ_4(sc, ET_MAC_CFG1);
+ if ((cfg1 & (ET_MAC_CFG1_SYNC_TXEN | ET_MAC_CFG1_SYNC_RXEN)) ==
+ (ET_MAC_CFG1_SYNC_TXEN | ET_MAC_CFG1_SYNC_RXEN))
+ break;
+
+ DELAY(10);
+ }
+ /* Note: Timeout always happens when cable is not plugged in. */
+
+ sc->sc_flags |= ET_FLAG_TXRX_ENABLED;
+
+#undef NRETRY
+}
+
+static int
+et_ifmedia_upd(struct ifnet *ifp)
+{
+ struct et_softc *sc;
+ struct mii_data *mii;
+ struct mii_softc *miisc;
+
+ sc = ifp->if_softc;
+ mii = &sc->sc_miibus;
+ LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
+ PHY_RESET(miisc);
+ return (mii_mediachg(mii));
+}
+
+static void
+et_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
+{
+ struct et_softc *sc;
+ struct mii_data *mii;
+
+ sc = ifp->if_softc;
+ mii = &sc->sc_miibus;
+ mii_pollstat(mii);
+ ifmr->ifm_active = mii->mii_media_active;
+ ifmr->ifm_status = mii->mii_media_status;
}
void
@@ -497,6 +590,7 @@
sc->sc_tx = 0;
sc->sc_tx_intr = 0;
+ sc->sc_flags &= ~ET_FLAG_TXRX_ENABLED;
ifp->if_timer = 0;
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
@@ -595,6 +689,7 @@
void
et_reset(struct et_softc *sc)
{
+
CSR_WRITE_4(sc, ET_MAC_CFG1,
ET_MAC_CFG1_RST_TXFUNC | ET_MAC_CFG1_RST_RXFUNC |
ET_MAC_CFG1_RST_TXMC | ET_MAC_CFG1_RST_RXMC |
@@ -981,6 +1076,7 @@
s = splnet();
et_stop(sc);
+ et_reset(sc);
for (i = 0; i < ET_RX_NRING; ++i) {
sc->sc_rx_data[i].rbd_bufsize = et_bufsize[i].bufsize;
@@ -999,10 +1095,6 @@
if (error)
goto back;
- error = et_enable_txrx(sc);
- if (error)
- goto back;
-
error = et_start_rxdma(sc);
if (error)
goto back;
@@ -1011,6 +1103,7 @@
if (error)
goto back;
+ /* Enable interrupts. */
et_enable_intrs(sc, ET_INTRS);
callout_schedule(&sc->sc_tick, hz);
@@ -1019,6 +1112,9 @@
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
+
+ sc->sc_flags &= ~ET_FLAG_LINK;
+ et_ifmedia_upd(ifp);
back:
if (error)
et_stop(sc);
@@ -1038,6 +1134,8 @@
switch (cmd) {
case SIOCSIFFLAGS:
+ if ((error = ifioctl_common(ifp, cmd, data)) != 0)
+ break;
if (ifp->if_flags & IFF_UP) {
/*
* If only the PROMISC or ALLMULTI flag changes, then
@@ -1066,7 +1164,6 @@
error = 0;
}
break;
-
}
splx(s);
@@ -1082,7 +1179,9 @@
int trans;
struct mbuf *m;
- if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
+ if (((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) ||
+ ((sc->sc_flags & (ET_FLAG_LINK | ET_FLAG_TXRX_ENABLED)) !=
+ (ET_FLAG_LINK | ET_FLAG_TXRX_ENABLED)))
return;
trans = 0;
Home |
Main Index |
Thread Index |
Old Index