Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/external/bsd/drm2/dist/drm/i915 Avoid undefined behavior...
details: https://anonhg.NetBSD.org/src/rev/7fbdab45a900
branches: trunk
changeset: 453257:7fbdab45a900
user: msaitoh <msaitoh%NetBSD.org@localhost>
date: Mon Aug 05 10:14:19 2019 +0000
description:
Avoid undefined behavior. Found by kUBSan.
diffstat:
sys/external/bsd/drm2/dist/drm/i915/i915_reg.h | 40 +++++++++++++-------------
sys/external/bsd/drm2/dist/drm/i915/intel_pm.c | 6 +-
2 files changed, 23 insertions(+), 23 deletions(-)
diffs (179 lines):
diff -r a2222a06962c -r 7fbdab45a900 sys/external/bsd/drm2/dist/drm/i915/i915_reg.h
--- a/sys/external/bsd/drm2/dist/drm/i915/i915_reg.h Mon Aug 05 10:12:04 2019 +0000
+++ b/sys/external/bsd/drm2/dist/drm/i915/i915_reg.h Mon Aug 05 10:14:19 2019 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: i915_reg.h,v 1.7 2019/07/24 15:55:07 msaitoh Exp $ */
+/* $NetBSD: i915_reg.h,v 1.8 2019/08/05 10:14:19 msaitoh Exp $ */
/* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
@@ -2225,7 +2225,7 @@
#define VGA1_PD_P1_DIV_2 (1 << 13)
#define VGA1_PD_P1_SHIFT 8
#define VGA1_PD_P1_MASK (0x1f << 8)
-#define DPLL_VCO_ENABLE (1 << 31)
+#define DPLL_VCO_ENABLE __BIT(31)
#define DPLL_SDVO_HIGH_SPEED (1 << 30)
#define DPLL_DVO_2X_MODE (1 << 30)
#define DPLL_EXT_BUFFER_ENABLE_VLV (1 << 30)
@@ -3175,7 +3175,7 @@
#define PCH_ADPA 0xe1100
#define VLV_ADPA (VLV_DISPLAY_BASE + ADPA)
-#define ADPA_DAC_ENABLE (1<<31)
+#define ADPA_DAC_ENABLE __BIT(31)
#define ADPA_DAC_DISABLE 0
#define ADPA_PIPE_SELECT_MASK (1<<30)
#define ADPA_PIPE_A_SELECT 0
@@ -3337,7 +3337,7 @@
#define PIPE_A_SCRAMBLE_RESET (1 << 0)
/* Gen 3 SDVO bits: */
-#define SDVO_ENABLE (1 << 31)
+#define SDVO_ENABLE __BIT(31)
#define SDVO_PIPE_SEL(pipe) ((pipe) << 30)
#define SDVO_PIPE_SEL_MASK (1 << 30)
#define SDVO_PIPE_B_SELECT (1 << 30)
@@ -3428,7 +3428,7 @@
* Enables the LVDS port. This bit must be set before DPLLs are enabled, as
* the DPLL semantics change when the LVDS is assigned to that pipe.
*/
-#define LVDS_PORT_EN (1 << 31)
+#define LVDS_PORT_EN (1U << 31)
/* Selects pipe B for LVDS data. Must be set on pre-965. */
#define LVDS_PIPEB_SELECT (1 << 30)
#define LVDS_PIPE_MASK (1 << 30)
@@ -3588,7 +3588,7 @@
/* Backlight control */
#define BLC_PWM_CTL2 (dev_priv->info.display_mmio_offset + 0x61250) /* 965+ only */
-#define BLM_PWM_ENABLE (1 << 31)
+#define BLM_PWM_ENABLE __BIT(31)
#define BLM_COMBINATION_MODE (1 << 30) /* gen4 only */
#define BLM_PIPE_SELECT (1 << 29)
#define BLM_PIPE_SELECT_IVB (3 << 29)
@@ -3645,7 +3645,7 @@
/* PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is
* like the normal CTL from gen4 and earlier. Hooray for confusing naming. */
#define BLC_PWM_PCH_CTL1 0xc8250
-#define BLM_PCH_PWM_ENABLE (1 << 31)
+#define BLM_PCH_PWM_ENABLE __BIT(31)
#define BLM_PCH_OVERRIDE_ENABLE (1 << 30)
#define BLM_PCH_POLARITY (1 << 29)
#define BLC_PWM_PCH_CTL2 0xc8254
@@ -4166,7 +4166,7 @@
#define VLV_DP_C (VLV_DISPLAY_BASE + DP_C)
#define CHV_DP_D (VLV_DISPLAY_BASE + DP_D)
-#define DP_PORT_EN (1 << 31)
+#define DP_PORT_EN __BIT(31)
#define DP_PIPEB_SELECT (1 << 30)
#define DP_PIPE_MASK (1 << 30)
#define DP_PIPE_SELECT_CHV(pipe) ((pipe) << 16)
@@ -5052,7 +5052,7 @@
/* Sprite A control */
#define _DVSACNTR 0x72180
-#define DVS_ENABLE (1<<31)
+#define DVS_ENABLE __BIT(31)
#define DVS_GAMMA_ENABLE (1<<30)
#define DVS_PIXFORMAT_MASK (3<<25)
#define DVS_FORMAT_YUV422 (0<<25)
@@ -5459,7 +5459,7 @@
/* VBIOS regs */
#define VGACNTRL 0x71400
-# define VGA_DISP_DISABLE (1 << 31)
+# define VGA_DISP_DISABLE __BIT(31)
# define VGA_2X_MODE (1 << 30)
# define VGA_PIPE_B_SELECT (1 << 29)
@@ -6367,7 +6367,7 @@
#define PCH_TRANSCONF(pipe) _PIPE(pipe, _PCH_TRANSACONF, _PCH_TRANSBCONF)
#define LPT_TRANSCONF _PCH_TRANSACONF /* lpt has only one transcoder */
#define TRANS_DISABLE (0<<31)
-#define TRANS_ENABLE (1<<31)
+#define TRANS_ENABLE __BIT(31)
#define TRANS_STATE_MASK (1<<30)
#define TRANS_STATE_DISABLE (0<<30)
#define TRANS_STATE_ENABLE (1<<30)
@@ -6392,7 +6392,7 @@
#define _TRANSA_CHICKEN2 0xf0064
#define _TRANSB_CHICKEN2 0xf1064
#define TRANS_CHICKEN2(pipe) _PIPE(pipe, _TRANSA_CHICKEN2, _TRANSB_CHICKEN2)
-#define TRANS_CHICKEN2_TIMING_OVERRIDE (1<<31)
+#define TRANS_CHICKEN2_TIMING_OVERRIDE __BIT(31)
#define TRANS_CHICKEN2_FDI_POLARITY_REVERSED (1<<29)
#define TRANS_CHICKEN2_FRAME_START_DELAY_MASK (3<<27)
#define TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER (1<<26)
@@ -6428,7 +6428,7 @@
#define _FDI_TXB_CTL 0x61100
#define FDI_TX_CTL(pipe) _PIPE(pipe, _FDI_TXA_CTL, _FDI_TXB_CTL)
#define FDI_TX_DISABLE (0<<31)
-#define FDI_TX_ENABLE (1<<31)
+#define FDI_TX_ENABLE __BIT(31)
#define FDI_LINK_TRAIN_PATTERN_1 (0<<28)
#define FDI_LINK_TRAIN_PATTERN_2 (1<<28)
#define FDI_LINK_TRAIN_PATTERN_IDLE (2<<28)
@@ -6477,7 +6477,7 @@
#define _FDI_RXA_CTL 0xf000c
#define _FDI_RXB_CTL 0xf100c
#define FDI_RX_CTL(pipe) _PIPE(pipe, _FDI_RXA_CTL, _FDI_RXB_CTL)
-#define FDI_RX_ENABLE (1<<31)
+#define FDI_RX_ENABLE __BIT(31)
/* train, dp width same as FDI_TX */
#define FDI_FS_ERRC_ENABLE (1<<27)
#define FDI_FE_ERRC_ENABLE (1<<26)
@@ -6582,11 +6582,11 @@
#define PANEL_POWER_OFF (0 << 0)
#define PANEL_POWER_ON (1 << 0)
#define PCH_PP_ON_DELAYS 0xc7208
-#define PANEL_PORT_SELECT_MASK (3 << 30)
-#define PANEL_PORT_SELECT_LVDS (0 << 30)
-#define PANEL_PORT_SELECT_DPA (1 << 30)
-#define PANEL_PORT_SELECT_DPC (2 << 30)
-#define PANEL_PORT_SELECT_DPD (3 << 30)
+#define PANEL_PORT_SELECT_MASK (3U << 30)
+#define PANEL_PORT_SELECT_LVDS (0U << 30)
+#define PANEL_PORT_SELECT_DPA (1U << 30)
+#define PANEL_PORT_SELECT_DPC (2U << 30)
+#define PANEL_PORT_SELECT_DPD (3U << 30)
#define PANEL_POWER_UP_DELAY_MASK (0x1fff0000)
#define PANEL_POWER_UP_DELAY_SHIFT 16
#define PANEL_LIGHT_ON_DELAY_MASK (0x1fff)
@@ -6654,7 +6654,7 @@
#define TRANS_DP_CTL_B 0xe1300
#define TRANS_DP_CTL_C 0xe2300
#define TRANS_DP_CTL(pipe) _PIPE(pipe, TRANS_DP_CTL_A, TRANS_DP_CTL_B)
-#define TRANS_DP_OUTPUT_ENABLE (1<<31)
+#define TRANS_DP_OUTPUT_ENABLE __BIT(31)
#define TRANS_DP_PORT_SEL_B (0<<29)
#define TRANS_DP_PORT_SEL_C (1<<29)
#define TRANS_DP_PORT_SEL_D (2<<29)
diff -r a2222a06962c -r 7fbdab45a900 sys/external/bsd/drm2/dist/drm/i915/intel_pm.c
--- a/sys/external/bsd/drm2/dist/drm/i915/intel_pm.c Mon Aug 05 10:12:04 2019 +0000
+++ b/sys/external/bsd/drm2/dist/drm/i915/intel_pm.c Mon Aug 05 10:14:19 2019 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: intel_pm.c,v 1.17 2019/07/24 14:57:09 msaitoh Exp $ */
+/* $NetBSD: intel_pm.c,v 1.18 2019/08/05 10:14:19 msaitoh Exp $ */
/*
* Copyright © 2012 Intel Corporation
@@ -28,7 +28,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: intel_pm.c,v 1.17 2019/07/24 14:57:09 msaitoh Exp $");
+__KERNEL_RCSID(0, "$NetBSD: intel_pm.c,v 1.18 2019/08/05 10:14:19 msaitoh Exp $");
#include <linux/bitops.h>
#include <linux/cpufreq.h>
@@ -5036,7 +5036,7 @@
DRM_DEBUG_DRIVER("Failed to set the min frequency\n");
ret = sandybridge_pcode_read(dev_priv, GEN6_READ_OC_PARAMS, &pcu_mbox);
- if (!ret && (pcu_mbox & (1<<31))) { /* OC supported */
+ if (!ret && (pcu_mbox & __BIT(31))) { /* OC supported */
DRM_DEBUG_DRIVER("Overclocking supported. Max: %dMHz, Overclock max: %dMHz\n",
(dev_priv->rps.max_freq_softlimit & 0xff) * 50,
(pcu_mbox & 0xff) * 50);
Home |
Main Index |
Thread Index |
Old Index