Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/dev/usb port kue(4) to usbnet(9). interesting notes:
details: https://anonhg.NetBSD.org/src/rev/1af8a592911a
branches: trunk
changeset: 453532:1af8a592911a
user: mrg <mrg%NetBSD.org@localhost>
date: Fri Aug 16 08:51:09 2019 +0000
description:
port kue(4) to usbnet(9). interesting notes:
- move KUE_RXFILT_PROMISC setting into kue_setiff() from kue_init()
to avoid multiple setting KUE_CMD_SET_PKT_FILTER reg multiple times
- software-only constructs moved from if_kuereg.h into if_kue.c
- kue is the first (umb(4) will need it to, i think) to have its own
autoconf detach routine remain
- un_tx_xfer_flags is 0 here, not USBD_FORCE_SHORT_XFER
- fix a potential data exposure (but probably not without a USB
protocol tap). kue needs the transfers to be 64-byte aligned, and
while i doubt it sends more than the frame provided, were sending
random kernel data (whatever was the 0-63 bytes to alignment) to
the device.
diffstat says:
2 files changed, 189 insertions(+), 739 deletions(-)
diffstat:
sys/dev/usb/if_kue.c | 898 ++++++++++-------------------------------------
sys/dev/usb/if_kuereg.h | 66 +---
2 files changed, 207 insertions(+), 757 deletions(-)
diffs (truncated from 1296 to 300 lines):
diff -r 5b700d6159ae -r 1af8a592911a sys/dev/usb/if_kue.c
--- a/sys/dev/usb/if_kue.c Fri Aug 16 08:38:21 2019 +0000
+++ b/sys/dev/usb/if_kue.c Fri Aug 16 08:51:09 2019 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: if_kue.c,v 1.97 2019/08/01 00:10:22 mrg Exp $ */
+/* $NetBSD: if_kue.c,v 1.98 2019/08/16 08:51:09 mrg Exp $ */
/*
* Copyright (c) 1997, 1998, 1999, 2000
@@ -71,7 +71,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: if_kue.c,v 1.97 2019/08/01 00:10:22 mrg Exp $");
+__KERNEL_RCSID(0, "$NetBSD: if_kue.c,v 1.98 2019/08/16 08:51:09 mrg Exp $");
#ifdef _KERNEL_OPT
#include "opt_inet.h"
@@ -79,33 +79,15 @@
#endif
#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/sockio.h>
-#include <sys/mbuf.h>
#include <sys/kmem.h>
-#include <sys/kernel.h>
-#include <sys/socket.h>
-#include <sys/device.h>
-#include <sys/proc.h>
-#include <sys/rndsource.h>
-#include <net/if.h>
-#include <net/if_arp.h>
-#include <net/if_dl.h>
-#include <net/bpf.h>
-#include <net/if_ether.h>
+#include <dev/usb/usbnet.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/if_inarp.h>
#endif
-#include <dev/usb/usb.h>
-#include <dev/usb/usbdi.h>
-#include <dev/usb/usbdi_util.h>
-#include <dev/usb/usbdivar.h>
-#include <dev/usb/usbdevs.h>
-
#include <dev/usb/if_kuereg.h>
#include <dev/usb/kue_fw.h>
@@ -118,6 +100,28 @@
#define DPRINTFN(n, x)
#endif
+struct kue_type {
+ uint16_t kue_vid;
+ uint16_t kue_did;
+};
+
+struct kue_softc {
+ struct usbnet kue_un;
+
+ struct kue_ether_desc kue_desc;
+ uint16_t kue_rxfilt;
+ uint8_t *kue_mcfilters;
+};
+
+#define KUE_MCFILT(x, y) \
+ (uint8_t *)&(sc->kue_mcfilters[y * ETHER_ADDR_LEN])
+
+#define KUE_BUFSZ 1536
+#define KUE_MIN_FRAMELEN 60
+
+#define KUE_RX_LIST_CNT 1
+#define KUE_TX_LIST_CNT 1
+
/*
* Various supported device vendors/products.
*/
@@ -160,37 +164,36 @@
int kue_match(device_t, cfdata_t, void *);
void kue_attach(device_t, device_t, void *);
int kue_detach(device_t, int);
-int kue_activate(device_t, enum devact);
CFATTACH_DECL_NEW(kue, sizeof(struct kue_softc), kue_match, kue_attach,
- kue_detach, kue_activate);
+ kue_detach, usbnet_activate);
+
+static void kue_rx_loop(struct usbnet *, struct usbnet_chain *, uint32_t);
+static unsigned kue_tx_prepare(struct usbnet *, struct mbuf *,
+ struct usbnet_chain *);
+static int kue_ioctl_cb(struct ifnet *, u_long, void *);
+static int kue_init(struct ifnet *);
-static int kue_tx_list_init(struct kue_softc *);
-static int kue_rx_list_init(struct kue_softc *);
-static int kue_send(struct kue_softc *, struct mbuf *, int);
-static int kue_open_pipes(struct kue_softc *);
-static void kue_rxeof(struct usbd_xfer *, void *, usbd_status);
-static void kue_txeof(struct usbd_xfer *, void *, usbd_status);
-static void kue_start(struct ifnet *);
-static int kue_ioctl(struct ifnet *, u_long, void *);
-static void kue_init(void *);
-static void kue_stop(struct kue_softc *);
-static void kue_watchdog(struct ifnet *);
+static struct usbnet_ops kue_ops = {
+ .uno_ioctl = kue_ioctl_cb,
+ .uno_tx_prepare = kue_tx_prepare,
+ .uno_rx_loop = kue_rx_loop,
+ .uno_init = kue_init,
+};
-static void kue_setmulti(struct kue_softc *);
-static void kue_reset(struct kue_softc *);
+static void kue_setiff(struct usbnet *);
+static void kue_reset(struct usbnet *);
-static usbd_status kue_ctl(struct kue_softc *, int, uint8_t,
+static usbd_status kue_ctl(struct usbnet *, int, uint8_t,
uint16_t, void *, uint32_t);
-static usbd_status kue_setword(struct kue_softc *, uint8_t, uint16_t);
-static int kue_load_fw(struct kue_softc *);
+static int kue_load_fw(struct usbnet *);
static usbd_status
-kue_setword(struct kue_softc *sc, uint8_t breq, uint16_t word)
+kue_setword(struct usbnet *un, uint8_t breq, uint16_t word)
{
usb_device_request_t req;
- DPRINTFN(10,("%s: %s: enter\n", device_xname(sc->kue_dev),__func__));
+ DPRINTFN(10,("%s: %s: enter\n", device_xname(un->un_dev),__func__));
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = breq;
@@ -198,16 +201,16 @@
USETW(req.wIndex, 0);
USETW(req.wLength, 0);
- return usbd_do_request(sc->kue_udev, &req, NULL);
+ return usbd_do_request(un->un_udev, &req, NULL);
}
static usbd_status
-kue_ctl(struct kue_softc *sc, int rw, uint8_t breq, uint16_t val,
+kue_ctl(struct usbnet *un, int rw, uint8_t breq, uint16_t val,
void *data, uint32_t len)
{
usb_device_request_t req;
- DPRINTFN(10,("%s: %s: enter, len=%d\n", device_xname(sc->kue_dev),
+ DPRINTFN(10,("%s: %s: enter, len=%d\n", device_xname(un->un_dev),
__func__, len));
if (rw == KUE_CTL_WRITE)
@@ -220,16 +223,16 @@
USETW(req.wIndex, 0);
USETW(req.wLength, len);
- return usbd_do_request(sc->kue_udev, &req, data);
+ return usbd_do_request(un->un_udev, &req, data);
}
static int
-kue_load_fw(struct kue_softc *sc)
+kue_load_fw(struct usbnet *un)
{
usb_device_descriptor_t dd;
usbd_status err;
- DPRINTFN(1,("%s: %s: enter\n", device_xname(sc->kue_dev), __func__));
+ DPRINTFN(1,("%s: %s: enter\n", device_xname(un->un_dev), __func__));
/*
* First, check if we even need to load the firmware.
@@ -245,54 +248,54 @@
* it's probed while the firmware is still loaded and
* running.
*/
- if (usbd_get_device_desc(sc->kue_udev, &dd))
+ if (usbd_get_device_desc(un->un_udev, &dd))
return EIO;
if (UGETW(dd.bcdDevice) == KUE_WARM_REV) {
printf("%s: warm boot, no firmware download\n",
- device_xname(sc->kue_dev));
+ device_xname(un->un_dev));
return 0;
}
printf("%s: cold boot, downloading firmware\n",
- device_xname(sc->kue_dev));
+ device_xname(un->un_dev));
/* Load code segment */
DPRINTFN(1,("%s: kue_load_fw: download code_seg\n",
- device_xname(sc->kue_dev)));
+ device_xname(un->un_dev)));
/*XXXUNCONST*/
- err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN,
+ err = kue_ctl(un, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN,
0, __UNCONST(kue_code_seg), sizeof(kue_code_seg));
if (err) {
printf("%s: failed to load code segment: %s\n",
- device_xname(sc->kue_dev), usbd_errstr(err));
+ device_xname(un->un_dev), usbd_errstr(err));
return EIO;
}
/* Load fixup segment */
DPRINTFN(1,("%s: kue_load_fw: download fix_seg\n",
- device_xname(sc->kue_dev)));
+ device_xname(un->un_dev)));
/*XXXUNCONST*/
- err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN,
+ err = kue_ctl(un, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN,
0, __UNCONST(kue_fix_seg), sizeof(kue_fix_seg));
if (err) {
printf("%s: failed to load fixup segment: %s\n",
- device_xname(sc->kue_dev), usbd_errstr(err));
+ device_xname(un->un_dev), usbd_errstr(err));
return EIO;
}
/* Send trigger command. */
DPRINTFN(1,("%s: kue_load_fw: download trig_seg\n",
- device_xname(sc->kue_dev)));
+ device_xname(un->un_dev)));
/*XXXUNCONST*/
- err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN,
+ err = kue_ctl(un, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN,
0, __UNCONST(kue_trig_seg), sizeof(kue_trig_seg));
if (err) {
printf("%s: failed to load trigger segment: %s\n",
- device_xname(sc->kue_dev), usbd_errstr(err));
+ device_xname(un->un_dev), usbd_errstr(err));
return EIO;
}
- usbd_delay_ms(sc->kue_udev, 10);
+ usbd_delay_ms(un->un_udev, 10);
/*
* Reload device descriptor.
@@ -302,37 +305,44 @@
* code. This confuses the quirk mechanism, which is
* dependent on the revision data.
*/
- (void)usbd_reload_device_desc(sc->kue_udev);
+ (void)usbd_reload_device_desc(un->un_udev);
- DPRINTFN(1,("%s: %s: done\n", device_xname(sc->kue_dev), __func__));
+ DPRINTFN(1,("%s: %s: done\n", device_xname(un->un_dev), __func__));
/* Reset the adapter. */
- kue_reset(sc);
+ kue_reset(un);
return 0;
}
static void
-kue_setmulti(struct kue_softc *sc)
+kue_setiff(struct usbnet *un)
{
- struct ethercom *ec = &sc->kue_ec;
- struct ifnet *ifp = GET_IFP(sc);
+ struct ethercom * ec = usbnet_ec(un);
+ struct kue_softc * sc = usbnet_softc(un);
+ struct ifnet * const ifp = usbnet_ifp(un);
struct ether_multi *enm;
struct ether_multistep step;
int i;
- DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->kue_dev), __func__));
+ DPRINTFN(5,("%s: %s: enter\n", device_xname(un->un_dev), __func__));
+
+ /* If we want promiscuous mode, set the allframes bit. */
+ if (ifp->if_flags & IFF_PROMISC)
+ sc->kue_rxfilt |= KUE_RXFILT_PROMISC;
+ else
+ sc->kue_rxfilt &= ~KUE_RXFILT_PROMISC;
if (ifp->if_flags & IFF_PROMISC) {
allmulti:
ifp->if_flags |= IFF_ALLMULTI;
- sc->kue_rxfilt |= KUE_RXFILT_ALLMULTI;
+ sc->kue_rxfilt |= KUE_RXFILT_ALLMULTI|KUE_RXFILT_PROMISC;
sc->kue_rxfilt &= ~KUE_RXFILT_MULTICAST;
- kue_setword(sc, KUE_CMD_SET_PKT_FILTER, sc->kue_rxfilt);
+ kue_setword(un, KUE_CMD_SET_PKT_FILTER, sc->kue_rxfilt);
return;
}
- sc->kue_rxfilt &= ~KUE_RXFILT_ALLMULTI;
+ sc->kue_rxfilt &= ~(KUE_RXFILT_ALLMULTI|KUE_RXFILT_PROMISC);
Home |
Main Index |
Thread Index |
Old Index