Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/netinet6 inet6: nd6_free assumes all routers are process...
details: https://anonhg.NetBSD.org/src/rev/2f30a848c476
branches: trunk
changeset: 453834:2f30a848c476
user: roy <roy%NetBSD.org@localhost>
date: Tue Aug 27 21:11:26 2019 +0000
description:
inet6: nd6_free assumes all routers are processed by kernel RA
This hasn't been the case for a long time if you're a dhcpcd
user with a default config. As such, it's possible for the default
IPv6 router as set by dhcpcd could be erroneously gc'ed by nd6_free.
This reduces the scope of the ND6_WLOCK taken as well as fixing an
issue where we write to ln->ln_state without a lock being held.
diffstat:
sys/netinet6/nd6.c | 107 +++++++++++++++++++++++-----------------------------
1 files changed, 47 insertions(+), 60 deletions(-)
diffs (164 lines):
diff -r 93fd76396f87 -r 2f30a848c476 sys/netinet6/nd6.c
--- a/sys/netinet6/nd6.c Tue Aug 27 19:23:22 2019 +0000
+++ b/sys/netinet6/nd6.c Tue Aug 27 21:11:26 2019 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: nd6.c,v 1.259 2019/08/22 21:22:50 roy Exp $ */
+/* $NetBSD: nd6.c,v 1.260 2019/08/27 21:11:26 roy Exp $ */
/* $KAME: nd6.c,v 1.279 2002/06/08 11:16:51 itojun Exp $ */
/*
@@ -31,7 +31,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: nd6.c,v 1.259 2019/08/22 21:22:50 roy Exp $");
+__KERNEL_RCSID(0, "$NetBSD: nd6.c,v 1.260 2019/08/27 21:11:26 roy Exp $");
#ifdef _KERNEL_OPT
#include "opt_net_mpsafe.h"
@@ -1189,7 +1189,6 @@
static void
nd6_free(struct llentry *ln, int gc)
{
- struct nd_defrouter *dr;
struct ifnet *ifp;
struct in6_addr *in6;
struct sockaddr_in6 sin6;
@@ -1204,81 +1203,70 @@
* even though it is not harmful, it was not really necessary.
*/
- if (!ip6_forwarding) {
- ND6_WLOCK();
- dr = nd6_defrouter_lookup(in6, ifp);
-
- if (dr != NULL && dr->expire &&
- ln->ln_state == ND6_LLINFO_STALE && gc) {
+ if (!ip6_forwarding && ln->ln_router) {
+ if (ln->ln_state == ND6_LLINFO_STALE && gc) {
/*
* If the reason for the deletion is just garbage
- * collection, and the neighbor is an active default
+ * collection, and the neighbor is an active
* router, do not delete it. Instead, reset the GC
* timer using the router's lifetime.
- * Simply deleting the entry would affect default
+ * Simply deleting the entry may affect default
* router selection, which is not necessarily a good
* thing, especially when we're using router preference
* values.
* XXX: the check for ln_state would be redundant,
* but we intentionally keep it just in case.
*/
- if (dr->expire > time_uptime)
+ if (ln->ln_expire > time_uptime)
nd6_llinfo_settimer(ln,
- (dr->expire - time_uptime) * hz);
+ (ln->ln_expire - time_uptime) * hz);
else
nd6_llinfo_settimer(ln, nd6_gctimer * hz);
- ND6_UNLOCK();
LLE_WUNLOCK(ln);
return;
}
- if (ln->ln_router || dr) {
- /*
- * We need to unlock to avoid a LOR with nd6_rt_flush()
- * with the rnh and for the calls to
- * nd6_pfxlist_onlink_check() and nd6_defrouter_select() in the
- * block further down for calls into nd6_lookup().
- * We still hold a ref.
- */
- LLE_WUNLOCK(ln);
+ ND6_WLOCK();
- /*
- * nd6_rt_flush must be called whether or not the neighbor
- * is in the Default Router List.
- * See a corresponding comment in nd6_na_input().
- */
- nd6_rt_flush(in6, ifp);
- }
+ /*
+ * We need to unlock to avoid a LOR with nd6_rt_flush()
+ * with the rnh and for the calls to
+ * nd6_pfxlist_onlink_check() and nd6_defrouter_select() in the
+ * block further down for calls into nd6_lookup().
+ * We still hold a ref.
+ *
+ * Temporarily fake the state to choose a new default
+ * router and to perform on-link determination of
+ * prefixes correctly.
+ * Below the state will be set correctly,
+ * or the entry itself will be deleted.
+ */
+ ln->ln_state = ND6_LLINFO_INCOMPLETE;
+ LLE_WUNLOCK(ln);
- if (dr) {
- /*
- * Unreachablity of a router might affect the default
- * router selection and on-link detection of advertised
- * prefixes.
- */
+ /*
+ * nd6_rt_flush must be called whether or not the neighbor
+ * is in the Default Router List.
+ * See a corresponding comment in nd6_na_input().
+ */
+ nd6_rt_flush(in6, ifp);
- /*
- * Temporarily fake the state to choose a new default
- * router and to perform on-link determination of
- * prefixes correctly.
- * Below the state will be set correctly,
- * or the entry itself will be deleted.
- */
- ln->ln_state = ND6_LLINFO_INCOMPLETE;
+ /*
+ * Unreachablity of a router might affect the default
+ * router selection and on-link detection of advertised
+ * prefixes.
+ *
+ * Since nd6_defrouter_select() does not affect the
+ * on-link determination and MIP6 needs the check
+ * before the default router selection, we perform
+ * the check now.
+ */
+ nd6_pfxlist_onlink_check();
- /*
- * Since nd6_defrouter_select() does not affect the
- * on-link determination and MIP6 needs the check
- * before the default router selection, we perform
- * the check now.
- */
- nd6_pfxlist_onlink_check();
-
- /*
- * refresh default router list
- */
- nd6_defrouter_select();
- }
+ /*
+ * refresh default router list
+ */
+ nd6_defrouter_select();
#ifdef __FreeBSD__
/*
@@ -1288,10 +1276,9 @@
if (ln->la_flags & LLE_REDIRECT)
nd6_free_redirect(ln);
#endif
+
ND6_UNLOCK();
-
- if (ln->ln_router || dr)
- LLE_WLOCK(ln);
+ LLE_WLOCK(ln);
}
sockaddr_in6_init(&sin6, in6, 0, 0, 0);
Home |
Main Index |
Thread Index |
Old Index