Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/trunk]: src/sys/arch/evbarm/conf OMAP3 SoC and all peripherals in the IG...



details:   https://anonhg.NetBSD.org/src/rev/ecf304b9df82
branches:  trunk
changeset: 460781:ecf304b9df82
user:      jmcneill <jmcneill%NetBSD.org@localhost>
date:      Sun Nov 03 12:17:32 2019 +0000

description:
OMAP3 SoC and all peripherals in the IGEPV2 kernel are now supported by
GENERIC.

diffstat:

 sys/arch/evbarm/conf/IGEPV2        |  268 -------------------------------------
 sys/arch/evbarm/conf/README.evbarm |    3 +-
 2 files changed, 1 insertions(+), 270 deletions(-)

diffs (289 lines):

diff -r 90a61612ef71 -r ecf304b9df82 sys/arch/evbarm/conf/IGEPV2
--- a/sys/arch/evbarm/conf/IGEPV2       Sun Nov 03 12:16:35 2019 +0000
+++ /dev/null   Thu Jan 01 00:00:00 1970 +0000
@@ -1,268 +0,0 @@
-#
-#      $NetBSD: IGEPV2,v 1.35 2019/05/18 08:49:23 skrll Exp $
-#
-#      IGEPv2 -- TI OMAP 3530 Eval Board Kernel
-#
-
-include        "arch/evbarm/conf/std.igepv2"
-
-# estimated number of users
-
-maxusers       32
-
-# Standard system options
-
-options        RTC_OFFSET=0    # hardware clock is this many mins. west of GMT
-#options       NTP             # NTP phase/frequency locked loop
-
-# CPU options
-
-options        CPU_CORTEXA8
-options        OMAP_3530
-options        PMAPCOUNTERS
-
-# Architecture options
-
-# File systems
-
-file-system    FFS             # UFS
-#file-system   LFS             # log-structured file system
-file-system    MFS             # memory file system
-file-system    NFS             # Network file system
-#file-system   ADOSFS          # AmigaDOS-compatible file system
-#file-system   EXT2FS          # second extended file system (linux)
-#file-system   CD9660          # ISO 9660 + Rock Ridge file system
-file-system    MSDOSFS         # MS-DOS file system
-#file-system   FDESC           # /dev/fd
-#file-system   KERNFS          # /kern
-#file-system   NULLFS          # loopback file system
-file-system    PROCFS          # /proc
-#file-system   PUFFS           # Userspace file systems (e.g. ntfs-3g & sshfs)
-#file-system   UMAPFS          # NULLFS + uid and gid remapping
-#file-system   UNION           # union file system
-file-system    TMPFS           # memory file system
-file-system    PTYFS           # /dev/pts/N support
-
-# File system options
-#options       QUOTA           # legacy UFS quotas
-#options       QUOTA2          # new, in-filesystem UFS quotas
-#options       DISKLABEL_EI    # disklabel Endian Independent support
-#options       FFS_EI          # FFS Endian Independent support
-#options       NFSSERVER
-#options       SOFTDEP
-options        WAPBL           # File system journaling support
-#options       FFS_NO_SNAPSHOT # No FFS snapshot support
-
-# Networking options
-
-#options       GATEWAY         # packet forwarding
-options        INET            # IP + ICMP + TCP + UDP
-options        INET6           # IPV6
-#options       IPSEC           # IP security
-#options       IPSEC_DEBUG     # debug for IP security
-#options       MROUTING        # IP multicast routing
-#options       PIM             # Protocol Independent Multicast
-#options       NETATALK        # AppleTalk networking
-#options       PPP_BSDCOMP     # BSD-Compress compression support for PPP
-#options       PPP_DEFLATE     # Deflate compression support for PPP
-#options       PPP_FILTER      # Active filter support for PPP (requires bpf)
-#options       TCP_DEBUG       # Record last TCP_NDEBUG packets with SO_DEBUG
-
-options        NFS_BOOT_BOOTP
-options        NFS_BOOT_DHCP
-#options               NFS_BOOT_BOOTSTATIC
-#options               NFS_BOOTSTATIC_MYIP="\"192.168.1.4\""
-#options               NFS_BOOTSTATIC_GWIP="\"192.168.1.1\""
-#options               NFS_BOOTSTATIC_MASK="\"255.255.255.0\""
-#options               NFS_BOOTSTATIC_SERVADDR="\"192.168.1.1\""
-#options               NFS_BOOTSTATIC_SERVER="\"192.168.1.1:/nfs/sdp2430\""
-
-options        NFS_BOOT_RWSIZE=1024
-
-# Compatibility options
-
-include        "conf/compat_netbsd30.config"
-options        COMPAT_NETBSD32 # allow running arm (e.g. non-earm) binaries
-
-# Shared memory options
-
-options        SYSVMSG         # System V-like message queues
-options        SYSVSEM         # System V-like semaphores
-options        SYSVSHM         # System V-like memory sharing
-
-# Device options
-
-#options       MEMORY_DISK_HOOKS       # boottime setup of ramdisk
-#options       MEMORY_DISK_ROOT_SIZE=8192      # Size in blocks
-#options       MEMORY_DISK_DYNAMIC
-#options       MINIROOTSIZE=1000       # Size in blocks
-#options       MEMORY_DISK_IS_ROOT     # use memory disk as root
-
-# Miscellaneous kernel options
-options        KTRACE          # system call tracing, a la ktrace(1)
-#options       LKM             # loadable kernel modules
-#options       SCSIVERBOSE     # Verbose SCSI errors
-#options       MIIVERBOSE      # Verbose MII autoconfuration messages
-#options       DDB_KEYCODE=0x40
-#options       USERCONF        # userconf(4) support
-#options       PIPE_SOCKETPAIR # smaller, but slower pipe(2)
-
-# Development and Debugging options
-
-options        DIAGNOSTIC      # internal consistency checks
-#options       DEBUG
-#options       PMAP_DEBUG      # Enable pmap_debug_level code
-options        DDB             # in-kernel debugger
-options        DDB_ONPANIC=1
-options        DDB_HISTORY_SIZE=100    # Enable history editing in DDB
-#options       KGDB
-makeoptions    DEBUG="-g"      # compile full symbol table
-makeoptions    COPY_SYMTAB=1
-
-options        VERBOSE_INIT_ARM # verbose bootstraping messages
-options        EARLYCONS=beagle
-options        CONSADDR=0x49020000, CONSPEED=115200
-
-## USB Debugging options
-#options USB_DEBUG
-#options OHCI_DEBUG
-#options UHUB_DEBUG
-
-
-# Valid options for BOOT_ARGS:
-#  single              Boot to single user only
-#  kdb                 Give control to kernel debugger
-#  ask                 Ask for file name to reboot from
-#  pmapdebug=<n>       If PMAP_DEBUG, set pmap_debug_level to <n>
-#  memorydisk=<n>      Set memorydisk size to <n> KB
-#  quiet               Show aprint_naive output
-#  verbose             Show aprint_normal and aprint_verbose output
-options        BOOT_ARGS="\"\""
-
-config         netbsd          root on ? type ?
-
-# The main bus device
-mainbus0       at root
-
-# The boot cpu
-cpu0           at mainbus?
-
-# Specify the memory size in megabytes.
-options        MEMSIZE=512
-
-# L3 Interconnect
-L3i0           at mainbus?
-
-# OBIO
-obio0          at mainbus? base 0x48000000 size 0x1000000      # L4 CORE
-obio1          at mainbus? base 0x48300000 size 0x0100000      # L4 WAKEUP
-obio2          at mainbus? base 0x49000000 size 0x0100000      # L4 PERIPHERAL
-#obio3         at mainbus? base 0x54000000 size 0x0800000      # L4 EMUL
-
-# General Purpose Memory Controller
-gpmc0          at mainbus? base 0x6e000000
-
-smsh0          at gpmc0 addr 0x2c000000 intr 272       # gpio5 16 (gpio 176)
-ukphy*         at mii?
-
-# SDHC controllers
-sdhc0          at obio0 addr 0x4809C000 size 0x0400 intr 83
-#sdhc1         at obio0 addr 0x480B4000 size 0x0400 intr 86
-#sdhc2         at obio0 addr 0x480AD000 size 0x0400 intr 94
-sdmmc*         at sdhc?                # SD/MMC bus
-ld*            at sdmmc?
-
-# NAND controller
-omapnand0      at gpmc? addr 0x20000000
-
-# NAND layer
-nand0          at nandbus?
-
-# use the bad block table
-options NAND_BBT
-
-# Define flash partitions for board
-flash0         at nand0 offset 0x000000 size 0x080000 readonly 1 # X-Loader
-flash1         at nand0 offset 0x080000 size 0x1e0000 readonly 1 # U-Boot
-flash2         at nand0 offset 0x260000 size 0x020000 readonly 1 # UB Env
-flash3         at nand0 offset 0x280000 size 0x400000          # kernel
-flash4         at nand0 offset 0x680000 size 0                 # filesystem
-
-
-# Interrupt Controller
-omapicu0       at obio0 addr 0x48200000 size 0x1000 intrbase 0
-omapgpio0      at obio1 addr 0x48310000 size 0x0400 intrbase 96  intr 29
-#omapgpio1     at obio2 addr 0x49050000 size 0x0400 intrbase 128 intr 30
-#omapgpio2     at obio2 addr 0x49052000 size 0x0400 intrbase 160 intr 31
-#omapgpio3     at obio2 addr 0x49054000 size 0x0400 intrbase 192 intr 32
-omapgpio4      at obio2 addr 0x49056000 size 0x0400 intrbase 224 intr 33
-omapgpio5      at obio2 addr 0x49058000 size 0x0400 intrbase 256 intr 34
-
-gpio*          at omapgpio?
-
-# System Control Module
-omapscm0       at obio0 addr 0x48002000 size 0x1000
-
-# I2C Controller
-omapiic0       at obio0 addr 0x48070000 size 0x1000 intr 56    # I2C1
-omapiic1       at obio0 addr 0x48060000 size 0x1000 intr 61    # I2C3
-iic*           at omapiic?
-
-# On-board 16550 UARTs
-#com0          at obio0 addr 0x4806a000 intr 72 mult 4 # UART1
-#com1          at obio0 addr 0x4806c000 intr 73 mult 4 # UART2
-com0           at obio2 addr 0x49020000 intr 74 mult 4 # UART3 (console)
-
-# Operating System Timer
-omapmputmr0    at obio2 addr 0x49032000 intr 38        # GP Timer 2
-# Statistics Timer
-omapmputmr1    at obio2 addr 0x49034000 intr 39        # GP Timer 3
-# Microtime Reference Timer
-omapmputmr2    at obio2 addr 0x49036000 intr 40        # GP Timer 4
-options OMAP_MPU_TIMER_CLOCK_FREQ=12000000
-
-# Watchdog timers
-omapwdt32k*    at obio2 addr 0x49030000 size 2048      # WDT3
-#omapwdt32k*   at obio1 addr 0x4830c000 size 2048      # WDT1
-#omapwdt32k*   at obio1 addr 0x48314000 size 2048      # WDT2
-
-# onboard DMA
-omapdma0       at obio0 addr 0x48056000 size 0x1000
-
-# Power, Reset and Clock Management
-prcm*          at obio1 addr 0x48306000 size 0x2000    # PRM Module
-
-# On-board USB
-#ohci*         at obio0 addr 0x48064400 size 0x0400 intr 76
-#ehci*         at obio0 addr 0x48064800 size 0x0400 intr 77
-#usb*          at ohci?
-#uhub*         at usb?
-#umass*                at uhub? port ? configuration ? interface ?
-#scsibus*      at scsi?
-#sd*           at scsibus ? target ? lun ?
-
-# Hardware clocking and power management
-
-options        HWCLOCK
-options        HWCLOCK_MACHINE="<arch/arm/omap/hwclock_omap1.h>"
-options        OMAP_CK_REF_SPEED=12000000
-
-# Pseudo-Devices
-
-# disk/mass storage pseudo-devices
-pseudo-device  md                      # memory disk device (ramdisk)
-#pseudo-device vnd                     # disk-like interface to files
-#pseudo-device fss                     # file system snapshot device
-#pseudo-device putter                  # for puffs and pud
-
-# network pseudo-devices
-pseudo-device  bpfilter                # Berkeley packet filter
-pseudo-device  loop                    # network loopback
-#pseudo-device kttcp                   # network loopback
-
-# miscellaneous pseudo-devices
-pseudo-device  pty                     # pseudo-terminals
-#options       RND_COM
-#pseudo-device clockctl                # user control of clock subsystem
-pseudo-device  ksyms                   # /dev/ksyms
-pseudo-device  lockstat                # lock profiling
diff -r 90a61612ef71 -r ecf304b9df82 sys/arch/evbarm/conf/README.evbarm
--- a/sys/arch/evbarm/conf/README.evbarm        Sun Nov 03 12:16:35 2019 +0000
+++ b/sys/arch/evbarm/conf/README.evbarm        Sun Nov 03 12:17:32 2019 +0000
@@ -1,4 +1,4 @@
-$NetBSD: README.evbarm,v 1.26 2019/11/03 12:11:42 jmcneill Exp $
+$NetBSD: README.evbarm,v 1.27 2019/11/03 12:17:32 jmcneill Exp $
 
 config         date            boards
 -------------------------------------------------------------------------------
@@ -14,7 +14,6 @@
 GUMSTIX                2006/10/16      Gumstix Inc. PXA255/270 based boards
 HDL_G          2006/04/16      I-O DATA HDL-G Giga LANDISK
 HPT5325                2012/03/31      HP t5325 Thin Client
-IGEPV2         2010/06/16      IGEPv2 OMAP3530 eval board
 IMX31LITE      2008/04/27      Freescale i.M31 DEV LITE KIT
 INTEGRATOR     2001/10/27      ARM Integrator board
 IQ31244                2003/05/14      Intel IQ31244 reference board



Home | Main Index | Thread Index | Old Index