Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/dev/mii - Use auto-negotiation when forcing 1000BASE-T.
details: https://anonhg.NetBSD.org/src/rev/de38da990d3c
branches: trunk
changeset: 461048:de38da990d3c
user: msaitoh <msaitoh%NetBSD.org@localhost>
date: Thu Nov 14 09:06:21 2019 +0000
description:
- Use auto-negotiation when forcing 1000BASE-T.
- Add XXX comment for strange pause setting code. I suspect this is wrong.
- On my environments, 1000BASE-T half duplex doesn't work, so we might remove
IFM_1000T_HDX from this device in future.
diffstat:
sys/dev/mii/ipgphy.c | 59 ++++++++++++++++++++++-----------------------------
1 files changed, 26 insertions(+), 33 deletions(-)
diffs (140 lines):
diff -r 8561215a6c43 -r de38da990d3c sys/dev/mii/ipgphy.c
--- a/sys/dev/mii/ipgphy.c Thu Nov 14 09:00:23 2019 +0000
+++ b/sys/dev/mii/ipgphy.c Thu Nov 14 09:06:21 2019 +0000
@@ -32,7 +32,7 @@
* Driver for the IC Plus IP1000A/IP1001 10/100/1000 PHY.
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: ipgphy.c,v 1.3 2019/11/14 09:00:23 msaitoh Exp $");
+__KERNEL_RCSID(0, "$NetBSD: ipgphy.c,v 1.4 2019/11/14 09:06:21 msaitoh Exp $");
#include <sys/param.h>
#include <sys/systm.h>
@@ -60,7 +60,7 @@
static int ipgphy_service(struct mii_softc *, struct mii_data *, int);
static void ipgphy_status(struct mii_softc *);
-static int ipgphy_mii_phy_auto(struct mii_softc *);
+static int ipgphy_mii_phy_auto(struct mii_softc *, u_int);
static void ipgphy_load_dspcode(struct mii_softc *);
static void ipgphy_reset(struct mii_softc *);
@@ -126,7 +126,7 @@
ipgphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
- uint16_t gig, reg, speed;
+ uint16_t reg, speed;
switch (cmd) {
case MII_POLLSTAT:
@@ -154,16 +154,13 @@
switch (IFM_SUBTYPE(ife->ifm_media)) {
case IFM_AUTO:
- (void)ipgphy_mii_phy_auto(sc);
- goto done;
- break;
-
case IFM_1000_T:
/*
- * XXX
- * Manual 1000baseT setting doesn't seem to work.
+ * This device is required to do auto negotiation
+ * on 1000BASE-T.
*/
- speed = BMCR_S1000;
+ (void)ipgphy_mii_phy_auto(sc, ife->ifm_media);
+ goto done;
break;
case IFM_100_TX:
@@ -178,26 +175,11 @@
return EINVAL;
}
- if (((ife->ifm_media & IFM_GMASK) & IFM_FDX) != 0) {
+ if ((ife->ifm_media & IFM_FDX) != 0)
speed |= BMCR_FDX;
- gig = GTCR_ADV_1000TFDX;
- } else
- gig = GTCR_ADV_1000THDX;
PHY_WRITE(sc, MII_100T2CR, 0);
PHY_WRITE(sc, MII_BMCR, speed);
-
- if (IFM_SUBTYPE(ife->ifm_media) != IFM_1000_T)
- break;
-
- PHY_WRITE(sc, MII_100T2CR, gig);
- PHY_WRITE(sc, MII_BMCR, speed);
-
- if (mii->mii_media.ifm_media & IFM_ETH_MASTER)
- gig |= GTCR_MAN_MS | GTCR_ADV_MS;
-
- PHY_WRITE(sc, MII_100T2CR, gig);
-
done:
break;
@@ -211,7 +193,8 @@
return 0;
/* Only used for autonegotiation. */
- if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) {
+ if ((IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) &&
+ (IFM_SUBTYPE(ife->ifm_media) != IFM_1000_T)) {
sc->mii_ticks = 0;
break;
}
@@ -242,7 +225,7 @@
break;
sc->mii_ticks = 0;
- ipgphy_mii_phy_auto(sc);
+ ipgphy_mii_phy_auto(sc, ife->ifm_media);
break;
}
@@ -320,26 +303,36 @@
}
static int
-ipgphy_mii_phy_auto(struct mii_softc *sc)
+ipgphy_mii_phy_auto(struct mii_softc *sc, u_int media)
{
uint16_t reg = 0;
+ u_int subtype = IFM_SUBTYPE(media);
+ /* XXX Is it requreid ? */
if (sc->mii_mpd_model == MII_MODEL_xxICPLUS_IP1001) {
PHY_READ(sc, MII_ANAR, ®);
reg &= ~(ANAR_PAUSE_SYM | ANAR_PAUSE_ASYM);
reg |= ANAR_NP;
}
- reg |= ANAR_10 | ANAR_10_FD | ANAR_TX | ANAR_TX_FD;
+ if (subtype == IFM_AUTO)
+ reg |= ANAR_10 | ANAR_10_FD | ANAR_TX | ANAR_TX_FD;
if (sc->mii_flags & MIIF_DOPAUSE)
reg |= ANAR_PAUSE_SYM | ANAR_PAUSE_ASYM;
PHY_WRITE(sc, MII_ANAR, reg | ANAR_CSMA);
- reg = GTCR_ADV_1000TFDX | GTCR_ADV_1000THDX;
- if (sc->mii_mpd_model != MII_MODEL_xxICPLUS_IP1001)
- reg |= GTCR_ADV_MS;
+ if (subtype == IFM_AUTO)
+ reg = GTCR_ADV_1000TFDX | GTCR_ADV_1000THDX;
+ else if (subtype == IFM_1000_T) {
+ if ((media & IFM_FDX) != 0)
+ reg = GTCR_ADV_1000TFDX;
+ else
+ reg = GTCR_ADV_1000THDX;
+ } else
+ reg = 0;
+
PHY_WRITE(sc, MII_100T2CR, reg);
PHY_WRITE(sc, MII_BMCR, BMCR_FDX | BMCR_AUTOEN | BMCR_STARTNEG);
Home |
Main Index |
Thread Index |
Old Index