[src/trunk]: src/sys/dev/pci Start commit of Lan Media Corp T1/HSSI/DS3 driver

[explorer <explorer%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/9d6215b8b8a0
branches:  trunk
changeset: 467449:9d6215b8b8a0
user:      explorer <explorer%NetBSD.org@localhost>
date:      Thu Mar 25 00:51:53 1999 +0000

description:
Start commit of Lan Media Corp T1/HSSI/DS3 driver

diffstat:

 sys/dev/pci/files.pci |  30 +++++++++++++++++++-----------
 1 files changed, 19 insertions(+), 11 deletions(-)

diffs (77 lines):

diff -r 38f8cb9a0354 -r 9d6215b8b8a0 sys/dev/pci/files.pci
--- a/sys/dev/pci/files.pci     Thu Mar 25 00:41:46 1999 +0000
+++ b/sys/dev/pci/files.pci     Thu Mar 25 00:51:53 1999 +0000
@@ -1,4 +1,4 @@
-#      $NetBSD: files.pci,v 1.53 1999/02/09 02:04:36 sakamoto Exp $
+#      $NetBSD: files.pci,v 1.54 1999/03/25 00:51:53 explorer Exp $
 #
 # Config file and device description for machine-independent PCI code.
 # Included by ports that need it.  Requires that the SCSI files be
@@ -109,13 +109,21 @@
 # Texas Instruments ThunderLAN Chip.
 device  tl: ether, ifnet, arp, i2c, i2c_eeprom, mii
 attach  tl at pci
-file    dev/pci/if_tl.c     tl
+file    dev/pci/if_tl.c                tl
 
 # SDL Communications N2 PCI Network Interface
 device ntwoc: ifnet, hd64570
 attach ntwoc at pci with ntwoc_pci
 file   dev/pci/if_ntwoc_pci.c          ntwoc_pci
 
+# Lan Media Corporation T1/HSSI/DS3 driver
+device lmc: ifnet, sppp
+attach lmc at pci
+file   dev/pci/if_lmc.c                lmc
+file   dev/pci/if_lmc_common.c         lmc
+file   dev/pci/if_lmc_media.c          lmc
+file   dev/pci/if_lmc_nbsd.c           lmc
+
 # Essential Communications HIPPI interface
 # device declaration in sys/conf/files
 attach  esh at pci with esh_pci
@@ -123,15 +131,15 @@
 
 # generic PCI VGA
 attach vga at pci with vga_pci
-file   dev/pci/vga_pci.c       vga_pci needs-flag
+file   dev/pci/vga_pci.c               vga_pci needs-flag
 
 # DEC TGA
 device tga: wsemuldisplaydev, wsrasteremulops
 attach tga at pci
-file   dev/pci/tga.c           tga             needs-flag
-file   dev/pci/tga_conf.c      tga
-file   dev/pci/tga_bt463.c     tga
-file   dev/pci/tga_bt485.c     tga
+file   dev/pci/tga.c                   tga needs-flag
+file   dev/pci/tga_conf.c              tga
+file   dev/pci/tga_bt463.c             tga
+file   dev/pci/tga_bt485.c             tga
 
 # Ensoniq AudioPCI S5016
 device eap: audio, auconv, mulaw
@@ -154,11 +162,11 @@
 # (see documentation in the driver for what, exactly, should be supported)
 device puc { port = -1 }
 attach puc at pci
-file   dev/pci/puc.c           puc
-file   dev/pci/pucdata.c       puc
+file   dev/pci/puc.c                   puc
+file   dev/pci/pucdata.c               puc
 
 attach com at puc with com_puc
-file   dev/pci/com_puc.c       com_puc
+file   dev/pci/com_puc.c               com_puc
 
 # XXX THE FOLLOWING BLOCK SHOULD GO INTO dev/pci/files.pci, BUT CANNOT
 # XXX BECAUSE NOT 'lpt' IS DEFINED IN files.isa, RATHER THAN files.
@@ -166,7 +174,7 @@
 # XXX be fixed as well.)
 
 # attach       lpt at puc with lpt_puc
-# file dev/pci/lpt_puc.c       lpt_puc
+# file dev/pci/lpt_puc.c               lpt_puc
 
 # UHCI USB controller
 attach uhci at pci with uhci_pci