[src/netbsd-1-4]: src/distrib/notes/amiga pullup 1.14->1.15 (is)

[perry <perry%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/3cc2cee5a52c
branches:  netbsd-1-4
changeset: 468659:3cc2cee5a52c
user:      perry <perry%NetBSD.org@localhost>
date:      Wed May 05 20:57:27 1999 +0000

description:
pullup 1.14->1.15 (is)

diffstat:

 distrib/notes/amiga/xfer |  8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)

diffs (34 lines):

diff -r 951989651846 -r 3cc2cee5a52c distrib/notes/amiga/xfer
--- a/distrib/notes/amiga/xfer  Wed May 05 17:16:14 1999 +0000
+++ b/distrib/notes/amiga/xfer  Wed May 05 20:57:27 1999 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: xfer,v 1.13.2.1 1999/04/12 11:50:05 is Exp $   
+.\"    $NetBSD: xfer,v 1.13.2.2 1999/05/05 20:57:27 perry Exp $        
 .Pp
 Installation is supported from several media types, including:
 .Bl -bullet
@@ -13,7 +13,7 @@
 .It
 NetBSD partitions, if doing an upgrade.
 .It
-CD-ROM (but only SCSI CD-ROM)
+CD-ROM (SCSI or ATAPI)
 .El
 .Pp
 The miniroot file system needs to be transferred to the NetBSD swap
@@ -44,12 +44,14 @@
 .Pp
 To install NetBSD from a CD-ROM drive, make sure it is a SCSI
 CD-ROM on a SCSI bus currently supported by NetBSD (refer to the
-supported hardware list). If it is an ATAPI CD-ROM, or a
+supported hardware list) or an ATAPI cd-rom connected to the A1200
+or A4000 internal IDE connector. If it is a
 SCSI CD-ROM on a non-supported SCSI bus like 
 Blizzard-3 SCSI, Apollo SCSI) you must first copy the distribution
 sets to an AmigaDOS partition like described above.
 .Pp
 If your SCSI CD-ROM is connected to a supported SCSI host adapter,
+or it is an ATAPI cd-rom connected to the A1200/A4000 internal IDE connector,
 simply put the CD into the drive before installation.
 .Pp
 Once you have done this, you can proceed to the next