Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/sparc64/conf Ultra5/10 configuration.
details: https://anonhg.NetBSD.org/src/rev/f08bbe3ddf72
branches: trunk
changeset: 473439:f08bbe3ddf72
user: mrg <mrg%NetBSD.org@localhost>
date: Fri Jun 04 13:22:22 1999 +0000
description:
Ultra5/10 configuration.
diffstat:
sys/arch/sparc64/conf/POWEROFSEVEN | 422 +++++++++++++++++++++++++++++++++++++
1 files changed, 422 insertions(+), 0 deletions(-)
diffs (truncated from 426 to 300 lines):
diff -r 636cd840ed21 -r f08bbe3ddf72 sys/arch/sparc64/conf/POWEROFSEVEN
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/arch/sparc64/conf/POWEROFSEVEN Fri Jun 04 13:22:22 1999 +0000
@@ -0,0 +1,422 @@
+# $NetBSD: POWEROFSEVEN,v 1.1 1999/06/04 13:22:22 mrg Exp $
+
+include "arch/sparc64/conf/std.sparc64"
+
+maxusers 32
+
+## System kernel configuration. See options(4) for more detail.
+
+
+# Options for variants of the Sun SPARC architecure.
+# We currently support three architecture types; at least one is required.
+options SUN4U # sun4u - Ultra 140 and 170
+options TRAPWIN
+options __ELF__ # we use elf
+#options _LP64 # we're using a 64-bit compiler
+
+## System options specific to the sparc machine type
+
+## Use a faster console than the PROM's slow drawing routines. Not needed
+## for headless (no framebuffer) machines.
+# XXX broken on sparc64
+#options RASTERCONSOLE # fast rasterop console
+
+#### System options that are the same for all ports
+
+## Root device configuration: change the ?'s if you are going to use a
+## nonstandard root partition (other than where the kernel is booted from)
+## and/or nonstandard root type (not ffs or nfs). Normally this can be
+## automagically determined at boot time.
+
+config netbsd root on ? type ?
+
+## UVM options.
+options UVM_PAGE_TRKOWN
+options UVMHIST
+#options UVMHIST_PRINT # Loud!
+options PMAP_NEW
+
+## System call tracing (see ktrace(1)).
+options KTRACE
+
+## Collect statistics on kernel malloc's and free's. This does have a
+## significant performance hit on slower machines, so it is intended for
+## diagnostic use only.
+options KMEMSTATS
+
+## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2))
+#options SYSVMSG # System V message queues
+#options SYSVSEM # System V semaphores
+#options SYSVSHM # System V shared memory
+#options SHMMAXPGS=1024 # 1024 pages is the default
+
+## Loadable kernel module support; still under development.
+#options LKM
+
+## NFS boot options; default on sparc is the bootparam protocol
+options NFS_BOOT_BOOTPARAM
+#options NFS_BOOT_BOOTP
+#options NFS_BOOT_DHCP
+
+#### Debugging options
+
+## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
+## serial console break or keyboard reset, where the PROM would normally
+## intercept. DDB_HISTORY_SIZE adds up/down arrow command history.
+# we enable DDB in GENERIC for now.
+options DDB # kernel dynamic debugger
+options DDB_HISTORY_SIZE=100 # enable history editing in DDB
+#options DDB_ONPANIC # see also sysctl(8): `ddb.onpanic'
+
+## You may also use gdb, on another computer connected to this machine over
+## a serial port. Both KGDBDEV and KGDBRATE should be specified; KGDBDEV is
+## a dev_t encoded device number of the serial port to use.
+## (0xc01 = ttya, 0xc02 = ttyb.)
+#options KGDB # support for kernel gdb
+#options KGDBDEV=0xc01 # kgdb device number (this sample is `ttyb')
+#options KGDBRATE=38400 # baud rate
+
+
+## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
+## such that gdb(1) can be used on a kernel coredump.
+
+#makeoptions DEBUG="-g"
+
+
+## Adds code to the kernel that does internal consistency checks, and will
+## cause the kernel to panic if corruption of internal data structures
+## is detected.
+options DIAGNOSTIC # extra kernel sanity checking
+
+## Enable (possibly expensive) debugging code that may also display messages
+## on the system console
+options DEBUG
+
+## Make SCSI/PCI error messages more verbose when explaining their meanings.
+options SCSIVERBOSE
+options PCIVERBOSE
+
+## `INSECURE' turns off the kernel security level (securelevel = 0 always).
+## This allows writing to /dev/mem, loading kernel modules while multi-user,
+## and other insecurities good only for development work. Do not use this
+## option on a production machine.
+options INSECURE
+
+## Allow non-root users to grab /dev/console with programs such as xconsole.
+## `xconsole' therefore does not need setuid root with this option enabled.
+options UCONSOLE
+
+## `FDSCRIPTS' allows non-readable but executable scripts by providing a
+## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS',
+## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
+## opaque file mechanism. Perl calls this "secure setuid scripts."
+
+#options FDSCRIPTS
+#options SETUIDSCRIPTS
+
+## Options for compatibility with previous releases foreign system binaries.
+## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up
+## additional user-level utilities or system configuration files. See
+## compat_sunos(8) and compat_svr4(8).
+
+options COMPAT_43 # 4.3BSD system interfaces
+#options COMPAT_10 # NetBSD 1.0 binary compatibility
+#options COMPAT_11 # NetBSD 1.1 binary compatibility
+#options COMPAT_12 # NetBSD 1.2 binary compatibility
+options COMPAT_13 # NetBSD 1.3 binary compatibility
+#options COMPAT_NETBSD32 # NetBSD/sparc binary compatibility -- 64-bit only
+options COMPAT_SUNOS # SunOS 4.x binary compatibility
+options COMPAT_SVR4 # SunOS 5.x binary compatibility
+options EXEC_ELF32 # Exec module for SunOS 5.x binaries.
+#options EXEC_ELF64 # Exec module for sparc64 & SunOs 5.x binaries. -- 64-bit only
+#options SYSCALL_DEBUG
+#options COMPAT_AOUT # NetBSD/sparc compat support
+options EXEC_AOUT # execve(2) support for a.out binaries
+
+## File systems. You probably need at least one of FFS or NFS.
+file-system FFS # Berkeley Fast Filesystem
+file-system NFS # Sun NFS-compatible filesystem client
+#file-system KERNFS # kernel data-structure filesystem
+#file-system NULLFS # NULL layered filesystem
+file-system MFS # memory-based filesystem
+#file-system FDESC # user file descriptor filesystem
+#file-system UMAPFS # uid/gid remapping filesystem
+#file-system LFS # Log-based filesystem (still experimental)
+#file-system PORTAL # portal filesystem (still experimental)
+#file-system PROCFS # /proc
+file-system CD9660 # ISO 9660 + Rock Ridge file system
+#file-system UNION # union file system
+#file-system MSDOSFS # MS-DOS FAT filesystem(s).
+
+## File system options.
+options NFSSERVER # Sun NFS-compatible filesystem server
+#options QUOTA # FFS quotas
+#options FFS_EI # FFS Endian Independent support
+
+## Network protocol support. In most environments, INET is required.
+options INET # IP (Internet Protocol) v4
+#options TCP_COMPAT_42 # 4.2BSD IP implementation compatibility
+#options GATEWAY # packet forwarding ("router switch")
+#options MROUTING # packet forwarding of multicast packets
+#options DIRECTED_BROADCAST # allow broadcasts through routers
+#options NS # Xerox NS networking
+#options NSIP # Xerox NS tunneling over IP
+#options ISO,TPIP # OSI networking
+#options EON # OSI tunneling over IP
+#options CCITT,LLC,HDLC # X.25 packet switched protocol
+#options NETATALK # AppleTalk (over Ethernet) protocol
+options NTP # Network Time Protocol in-kernel support
+#options PPS_SYNC # Add serial line synchronization for NTP
+#options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs.
+#options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device
+#options PPP_BSDCOMP # Add BSD compression to ppp device
+#options PPP_DEFLATE # Add deflate (libz) compression to ppp device
+#options PPP_FILTER # Add active filters for ppp (via bpf)
+
+
+#### Main bus and CPU .. all systems.
+mainbus0 at root
+cpu0 at mainbus0
+
+#### Bus types found on SPARC systems.
+
+sbus0 at mainbus0 # Ultra 1
+#upa0 at mainbus0 # Ultra 1E, Ultra 2, Ex0000
+psycho* at mainbus0 # Darwin, Ultra5
+pci* at psycho?
+pci* at simba?
+simba* at pci? dev ? function ? # `APB' support.
+ebus* at pci? # ebus devices
+
+#### Standard system devices -- all required for a given architecture
+
+## Auxiliary system registers -- We use the OBP for power management
+#auxreg0 at sbus0
+#auxreg0 at pci0 # XXX this is wrong
+
+# We also need:
+# bpp0 at sbus0 # parallel port
+#lpt* at ebus? # parallel port
+
+## Mostek clock found on 4/300, sun4c, sun4m and sun4u systems.
+## The Mostek clock NVRAM is the "eeprom" on sun4/300 systems.
+#clock0 at sbus0 slot ? offset ?
+clock0 at ebus?
+
+## Timer chip found on 4/300, sun4c, sun4m and sun4u systems.
+timer0 at mainbus0 # sun4c
+
+#### Serial port configuration
+
+## Sbus machines:
+## Zilog 8530 serial chips. Each has two-channels.
+## zs0 is ttya and ttyb. zs1 is the keyboard and mouse.
+zs0 at sbus0 slot ? offset ?
+zstty0 at zs0 channel 0 # ttya
+zstty1 at zs0 channel 1 # ttyb
+
+zs1 at sbus0 slot ? offset ?
+kbd0 at zs1 channel 0 # keyboard
+ms0 at zs1 channel 1 # mouse
+
+## PCI machines:
+## Siemens SAB82532 controller: ttya and ttyb (sab)
+## Part of NS PC87332VLJ Super I/O controller: kbd/mouse (com)
+
+## These are two SAB82532 controllers
+#sab0 at ebus? # ttya/ttyb
+#sabtty0 at sab0 channel 0 # ttya
+#sabtty1 at sab0 channel 1 # ttyb
+
+## Part of a PC87332VLJ?
+#ucom0 at ebus? addr 0x3083f8 # `com' driver
+#ucom1 at ebus? addr 0x3062f8 #
+#ucom0 at ebus? # `com' driver
+#ucom1 at ebus? #
+#kbd0 at ucom0 channel 0 # keyboard
+#ms0 at ucom1 channel 1 # mouse
+
+#### Disk controllers and disks
+
+## The following flags may be set for the NCR53c94 based esp driver:
+## bits 0-7: disable disconnect/reselect for the corresponding target
+## bits 8-15: disable synchronous negotiation for target [bit-8]
+
+## sun4/300, sun4c, sun4m and sun4u on-board SCSI, and FSBE/S SBus SCSI cards.
+## Both `dma' and `esp' are needed in all cases.
+## Two kinds of additional SBus SCSI interfaces are available. One uses
+## "esp at sbus" like the sun4c on-board; the other uses "esp at dma".
+
+## sun4/300 SCSI - an NCR53c94 or equivalent behind
+## an LSI Logic DMA controller
+
+#dma0 at sbus0 slot ? offset ? # sun4c/sun4m/sun4u
+#esp0 at dma0 flags 0x0000 # sun4m/sun4u
+#scsibus* at esp?
+
+# FSBE/S SCSI
+#dma* at sbus? slot ? offset ? # SBus
+#esp* at dma? flags 0x0000 # SBus
+
+#scsibus* at esp?
+
+## Qlogic ISP SBus SCSI Card
+#isp* at sbus? slot ? offset ?
+#scsibus* at isp?
+
+## FAS support missing
+#fas* at sbus? slot ? offset ?
+#scsibus* at fas?
+
+## GLM support is missing
+#scsi* at pci? # 53C875 "glm" compatible
+
+## These entries find devices on all SCSI busses and assign
+## unit numbers dynamically.
+#sd* at scsibus? target ? lun ? # SCSI disks
+#st* at scsibus? target ? lun ? # SCSI tapes
+#cd* at scsibus? target ? lun ? # SCSI CD-ROMs
+#ch* at scsibus? target ? lun ? # SCSI changer devices
+#ss* at scsibus? target ? lun ? # SCSI scanners
+#uk* at scsibus? target ? lun ? # unknown SCSI
+
+# PCI IDE.
+pciide* at pci ? dev ? function ? flags 0x0000
+wd* at pciide? channel ? drive ? flags 0x0000
+atapibus* at pciide? channel ?
+
+cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
+sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
+uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
+
+## Floppy controller and drive found on SPARCstations.
+
+# need share with the sparc...uses auxreg. what is this on sparc64?
+#fdc0 at sbus0 slot ? offset ?
+#fdc0 at pci? # `fdthree'
Home |
Main Index |
Thread Index |
Old Index