[src/netbsd-1-5]: src Pull up 1.119->1.120: Descend into "distrib" on cleand...

[fredb <fredb%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/2eddbfe9f67b
branches:  netbsd-1-5
changeset: 489232:2eddbfe9f67b
user:      fredb <fredb%NetBSD.org@localhost>
date:      Thu Aug 24 02:19:59 2000 +0000

description:
Pull up 1.119->1.120:  Descend into "distrib" on cleandir, too, so that
setting MKOBJDIRS does the right thing in "distrib". Approved by jhawk
and thorpej.

diffstat:

 Makefile |  162 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 162 insertions(+), 0 deletions(-)

diffs (166 lines):

diff -r dbe1d8fdc15f -r 2eddbfe9f67b Makefile
--- /dev/null   Thu Jan 01 00:00:00 1970 +0000
+++ b/Makefile  Thu Aug 24 02:19:59 2000 +0000
@@ -0,0 +1,162 @@
+#      $NetBSD: Makefile,v 1.118.2.2 2000/08/24 02:19:59 fredb Exp $
+
+# This is the top-level makefile for building NetBSD. For an outline of
+# how to build a snapshot or release, as well as other release engineering
+# information, see http://www.netbsd.org/developers/releng/index.html
+#
+# Not everything you can set or do is documented in this makefile. In
+# particular, you should review the files in /usr/share/mk (especially
+# bsd.README) for general information on building programs and writing
+# Makefiles within this structure, and see the comments in src/etc/Makefile
+# for further information on installation and release set options.
+#
+# Variables listed below can be set on the make command line (highest
+# priority), in /etc/mk.conf (middle priority), or in the environment
+# (lowest priority).
+#
+# Variables:
+#   DESTDIR is the target directory for installation of the compiled
+#      software. It defaults to /. Note that programs are built against
+#      libraries installed in DESTDIR.
+#   MKMAN, if set to `no', will prevent building of manual pages.
+#   MKOBJDIRS, if not set to `no', will build object directories at 
+#      an appropriate point in a build.
+#   MKSHARE, if set to `no', will prevent building and installing
+#      anything in /usr/share.
+#   NBUILDJOBS is the number of jobs to start in parallel during a
+#      'make build'. It defaults to 1.
+#   UPDATE will avoid a `make cleandir' at the start of `make build',
+#      as well as having the effects listed in /usr/share/mk/bsd.README.
+#
+# Targets:
+#   build: builds a full release of netbsd in DESTDIR. If BUILD_DONE is
+#      set, this is an empty target.
+#   release: does a `make build,' and then tars up the DESTDIR files
+#      into RELEASEDIR, in release(7) format. (See etc/Makefile for
+#      more information on this.)
+#   snapshot: a synonym for release.
+
+.include <bsd.own.mk>
+
+MKOBJDIRS ?= no
+HAVE_EGCS!=    ${CXX} --version | egrep "^(2\.[89]|egcs)" ; echo
+
+.if defined(NBUILDJOBS)
+_J= -j${NBUILDJOBS}
+.endif
+
+.if defined(DESTDIR)
+_M=-m ${DESTDIR}/usr/share/mk
+.endif
+
+# NOTE THAT etc *DOES NOT* BELONG IN THE LIST BELOW
+
+SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share sys
+.if make(cleandir) || make(obj)
+SUBDIR+= distrib
+.ifdef MAKEOBJDIRPREFIX
+SUBDIR+= etc
+.endif
+.endif
+
+includes-lib: includes-include includes-sys
+
+.if exists(games)
+SUBDIR+= games
+.endif
+
+SUBDIR+= gnu
+# This is needed for libstdc++ and gen-params.
+includes-gnu: includes-include includes-sys
+
+.if exists(regress)
+.ifmake !(install)
+SUBDIR+= regress
+.endif
+
+regression-tests:
+       @echo Running regression tests...
+       @(cd ${.CURDIR}/regress && ${MAKE} ${_M} regress)
+.endif
+
+buildmsg:
+       @echo -n "Build started at: "
+       @date
+
+beforeinstall:
+.ifndef NODISTRIBDIRS
+.ifndef DESTDIR
+       (cd ${.CURDIR}/etc && ${MAKE} DESTDIR=/ distrib-dirs)
+.else
+       (cd ${.CURDIR}/etc && ${MAKE} distrib-dirs)
+.endif
+.endif
+
+afterinstall:
+.if ${MKMAN} != "no" && !defined(_BUILD)
+       ${MAKE} ${_M} whatis.db
+.endif
+
+whatis.db:
+       (cd ${.CURDIR}/share/man && ${MAKE} ${_M} makedb)
+
+# wrt info/dir below:  It's safe to move this over top of /usr/share/info/dir,
+# as the build will automatically remove/replace the non-pkg entries there.
+
+.if defined(BUILD_DONE)
+build:
+       @echo "Build installed into ${DESTDIR}"
+.else
+build: buildmsg beforeinstall
+.if defined(FORCE_DOMESTIC)
+       @echo '*** CAPUTE!'
+       @echo '    The FORCE_DOMESTIC flag is not compatible with "make build".'
+       @echo '    Please correct the problem and try again.'
+       @false
+.endif
+.if ${MKSHARE} != "no"
+       (cd ${.CURDIR}/share/mk && ${MAKE} install)
+.endif
+.if !defined(UPDATE) && !defined(NOCLEANDIR)
+       ${MAKE} ${_J} ${_M} cleandir
+.endif
+.if ${MKOBJDIRS} != "no"
+       ${MAKE} ${_M} obj
+.endif
+.if empty(HAVE_EGCS)
+.if defined(DESTDIR)
+       @echo "*** CAPUTE!"
+       @echo "    You attempted to compile the world without egcs.  You must"
+       @echo "    first install a native egcs compiler."
+       @false
+.else
+       (cd ${.CURDIR}/gnu/usr.bin/egcs && \
+           ${MAKE} ${_M} ${_J} dependall MKMAN=no && \
+           ${MAKE} ${_M} MKMAN=no install && ${MAKE} ${_M} cleandir)
+.endif
+.endif
+.if !defined(NOINCLUDES)
+       ${MAKE} ${_M} includes
+.endif
+       (cd ${.CURDIR}/lib/csu && \
+           ${MAKE} ${_M} ${_J} MKSHARE=no dependall && \
+           ${MAKE} ${_M} MKSHARE=no install)
+       (cd ${.CURDIR}/lib && \
+           ${MAKE} ${_M} ${_J} MKSHARE=no dependall && \
+           ${MAKE} ${_M} MKSHARE=no install)
+       (cd ${.CURDIR}/gnu/lib && \
+           ${MAKE} ${_M} ${_J} MKSHARE=no dependall && \
+           ${MAKE} ${_M} MKSHARE=no install)
+       ${MAKE} ${_M} ${_J} dependall && ${MAKE} ${_M} _BUILD= install
+.if defined(DOMESTIC) && !defined(EXPORTABLE_SYSTEM)
+       (cd ${.CURDIR}/${DOMESTIC} && ${MAKE} ${_M} ${_J} _SLAVE_BUILD= build)
+.endif
+       ${MAKE} ${_M} whatis.db
+       @echo -n "Build finished at: "
+       @date
+.endif
+
+release snapshot: build
+       (cd ${.CURDIR}/etc && ${MAKE} ${_M} INSTALL_DONE=1 release)
+
+.include <bsd.subdir.mk>