Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/netbsd-1-5]: src/sys/arch/x68k/conf Pull up revision 1.14 from the trunk.
details: https://anonhg.NetBSD.org/src/rev/66cc030e7e47
branches: netbsd-1-5
changeset: 488529:66cc030e7e47
user: minoura <minoura%NetBSD.org@localhost>
date: Sat Jul 15 02:43:06 2000 +0000
description:
Pull up revision 1.14 from the trunk.
Include GENERIC, instead of defining all the options and devices.
diffstat:
sys/arch/x68k/conf/ZSCONS | 315 +---------------------------------------------
1 files changed, 4 insertions(+), 311 deletions(-)
diffs (truncated from 324 to 300 lines):
diff -r 0e48e6f456a3 -r 66cc030e7e47 sys/arch/x68k/conf/ZSCONS
--- a/sys/arch/x68k/conf/ZSCONS Sat Jul 15 02:01:28 2000 +0000
+++ b/sys/arch/x68k/conf/ZSCONS Sat Jul 15 02:43:06 2000 +0000
@@ -1,316 +1,9 @@
-# $NetBSD: ZSCONS,v 1.13 2000/06/14 22:02:44 veego Exp $
+# $NetBSD: ZSCONS,v 1.13.2.1 2000/07/15 02:43:06 minoura Exp $
#
-# ZSCONS -- like GENERIC, but use zs console.
+# ZSCONS -- like GENERIC, but use zs serial console.
#
-include "arch/x68k/conf/std.x68k"
-
-#ident "ZSCONS-$Revision: 1.13 $"
-
-maxusers 32
-
-## System kernel configuration. See options(4) for more detail.
-
-
-## Options for variants of the m68k MPU
-## you must have at least the correct one; REQUIRED
-options M68030
-options M68040
-options M68060
-
-
-#### System options specific to the x68k port
-
-options EXTENDED_MEMORY # support for >16MB memory
-options FPU_EMULATE # software fpu emulation for MC68030
-options FPSP # floating point emulation for MC68040
-options M060SP # int/fp emulation for MC68060
-options JUPITER # support for "Jupiter-X" accelerator
-#options MAPPEDCOPY # use page mapping for large copyin/copyout
-options ZSCONSOLE,ZSCN_SPEED="9600" # use serial console
-
-
-#### System options that are the same for all ports
-
-## Root device configuration: change the ?'s if you are going to use a
-## nonstandard root partition (other than where the kernel is booted from)
-## and/or nonstandard root type (not ffs or nfs). Normally this can be
-## automagically determined at boot time.
-
-config netbsd root on ? type ?
-#config netbsd root on sd0 type ffs
-
-## RTC is offset from GMT; -540 means JST-9
-options RTC_OFFSET=-540 # hardware clock is this many mins. west of GMT
-
-## System call tracing (see ktrace(1)).
-options KTRACE
-
-## Collect statistics on kernel malloc's and free's. This does have a
-## significant performance hit on slower machines, so it is intended for
-## diagnostic use only.
-#options KMEMSTATS
-
-## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2))
-options SYSVMSG # System V message queues
-options SYSVSEM # System V semaphores
-options SYSVSHM # System V shared memory
-#options SHMMAXPGS=1024 # 1024 pages is the default
-
-## Loadable kernel module support
-#options LKM
-
-## NFS boot options; not supported currently: needs nfsboot program
-#options NFS_BOOT_BOOTPARAM
-#options NFS_BOOT_BOOTP
-#options NFS_BOOT_DHCP
-
-#### Debugging options
-
-## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
-## serial console break or keyboard reset, where the PROM would normally
-## intercept. DDB_HISTORY_SIZE adds up/down arrow command history.
-#options DDB # kernel dynamic debugger
-#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
-#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
-#options PANICBUTTON # interrupt switch invokes DDB
-
-## You may also use gdb, on another computer connected to this machine over
-## a serial port. Both KGDBDEV and KGDBRATE should be specified; KGDBDEV is
-## a dev_t encoded device number of the serial port to use.
-## KGDB is not supported for now.
-#options KGDB # support for kernel gdb
-#options KGDBDEV=0xc00 # kgdb device number
-#options KGDBRATE=9600 # baud rate
-
-## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
-## such that gdb(1) can be used on a kernel coredump.
-
-#makeoptions DEBUG="-g"
-
-## Adds code to the kernel that does internal consistency checks, and will
-## cause the kernel to panic if corruption of internal data structures
-## is detected.
-#options DIAGNOSTIC # extra kernel sanity checking
-
-## Enable (possibly expensive) debugging code that may also display messages
-## on the system console
-#options DEBUG
-
-## Make SCSI error messages more verbose when explaining their meanings.
-options SCSIVERBOSE
-
-## `INSECURE' turns off the kernel security level (securelevel = 0 always).
-## This allows writing to /dev/mem, loading kernel modules while multi-user,
-## and other insecurities good only for development work. Do not use this
-## option on a production machine.
-#options INSECURE
-
-## Allow non-root users to grab /dev/console with programs such as xconsole.
-## `xconsole' therefore does not need setuid root with this option enabled.
-#options UCONSOLE
-
-## `FDSCRIPTS' allows non-readable but executable scripts by providing a
-## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS',
-## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
-## opaque file mechanism. Perl calls this "secure setuid scripts."
-
-#options FDSCRIPTS
-#options SETUIDSCRIPTS
-
-## Options for compatibility with previous releases foreign system binaries.
-
-options COMPAT_43 # 4.3BSD system interfaces
-options COMPAT_09 # NetBSD 0.9 binary compatibility
-options COMPAT_10 # NetBSD 1.0 binary compatibility
-options COMPAT_11 # NetBSD 1.1 binary compatibility
-options COMPAT_12 # NetBSD 1.2 binary compatibility
-options COMPAT_13 # NetBSD 1.3 binary compatibility
-options COMPAT_14 # NetBSD 1.4 binary compatibility
-#options COMPAT_M68K4K # NetBSD/m68k4k binaries
-#options COMPAT_SUNOS # SunOS 4.x binary compatibility; broken
-#options COMPAT_SVR4 # SVR4 binary compatibility; broken
-#options COMPAT_LINUX # Linux/m68k binary compatibility
-#options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4)
-
-## File systems.
-file-system FFS # Berkeley Fast Filesystem
-file-system NFS # Sun NFS-compatible filesystem client
-file-system KERNFS # kernel data-structure filesystem
-#file-system NULLFS # NULL layered filesystem (buggy)
-#file-system OVERLAY # overlay file system
-file-system MFS # memory-based filesystem
-#file-system FDESC # user file descriptor filesystem
-file-system UMAPFS # uid/gid remapping filesystem
-#file-system LFS # Log-structured filesystem (experimental)
-#file-system PORTAL # portal filesystem (experimental)
-file-system PROCFS # /proc
-file-system CD9660 # ISO 9660 + Rock Ridge file system
-#file-system UNION # union file system (a little buggy)
-file-system MSDOSFS # MS-DOS FAT filesystem(s).
-#file-system ADOSFS # AmigaDOS filesystem
-
-## File system options.
-options NFSSERVER # Sun NFS-compatible filesystem server
-options QUOTA # FFS quotas
-#options FFS_EI # FFS Endian Independent support
-#options SOFTDEP # FFS soft updates support.
+include "arch/x68k/conf/GENERIC"
-## Network protocol support. In most environments, INET is required.
-options INET # IP (Internet Protocol) v4
-options INET6 # IPV6
-#options IPSEC # IP security
-#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
-#options IPSEC_DEBUG # debug for IP security
-options TCP_COMPAT_42 # 4.2BSD IP implementation compatibility
-#options GATEWAY # packet forwarding ("router switch")
-#options MROUTING # packet forwarding of multicast packets
-#options DIRECTED_BROADCAST # allow broadcasts through routers
-#options NS # Xerox NS networking
-#options NSIP # Xerox NS tunneling over IP
-#options ISO,TPIP # OSI networking
-#options EON # OSI tunneling over IP
-#options CCITT,LLC,HDLC # X.25 packet switched protocol
-options NETATALK # AppleTalk (over Ethernet) protocol
-options NTP # Network Time Protocol in-kernel support
-#options PPS_SYNC # Add serial line synchronization for NTP
-options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs.
-options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device
-options PPP_BSDCOMP # Add BSD compression to ppp device
-options PPP_DEFLATE # Add deflate (libz) compression to ppp device
-options PPP_FILTER # Add active filters for ppp (via bpf)
-
-
-
-#### Device configurations
-
-## Fundamental devices; see also std.x68k
-dmac0 at intio0 addr 0xe84000 # DMA controler
-xel0 at intio0
-opm0 at intio0 addr 0xe90000 # OPM: required for fdc
-
-## Display devices and console
-grfbus0 at mainbus0 # bitmapped displays
-grf0 at grfbus0 # multiplane graphics
-grf1 at grfbus0 # flexible graphics
-
-#kbd0 at mfp0 # standard keyboard
-#ite0 at grf0 # internal terminal emulator
-#options ITE_KERNEL_ATTR=4 # bold for kernel messages
- # see /sys/arch/x68k/dev/itevar.h
-pseudo-device pow 2 # software power switch
-
-## floppy disks
-fdc0 at intio0 addr 0xe94000 intr 96 dma 0 dmaintr 100 # floppy controler
-fd* at fdc0 unit ? # builtin floppy drives
-
-## SCSI devices
-scsirom0 at intio0 addr 0xfc0000 # Built-in SCSI BIOS
-scsirom1 at intio0 addr 0xea0020 # External SCSI BIOS
-spc0 at scsirom0 # genuin SCSI
-spc1 at scsirom1 # genuin SCSI
-scsibus* at spc?
-mha0 at scsirom1 # Mankai MK-HA1 (Mach-2)
-scsibus* at mha0
-
-sd* at scsibus? target ? lun ? # SCSI disks
-cd* at scsibus? target ? lun ? # SCSI CD-ROMs
-st* at scsibus? target ? lun ? # SCSI tapes
-#ss* at scsibus? target ? lun ? # SCSI scanners
-ch* at scsibus? target ? lun ? # SCSI changer devices
-#uk* at scsibus? target ? lun ? # SCSI unknown devices
-
-## Ports
-zsc0 at intio0 addr 0xe98000 intr 112
-zstty0 at zsc0 channel 0 # built-in RS-232C
-ms0 at zsc0 channel 1 # standard mouse
-#zsc1 at intio0 addr 0xeafc00 intr 113
-#zstty2 at zsc1 channel 0
-#zstty3 at zsc1 channel 1
-#zsc2 at intio0 addr 0xeafc10 intr 114
-#zstty4 at zsc2 channel 0
-#zstty5 at zsc2 channel 1
-par0 at intio0 addr 0xe8c000 # Builtin printer port
-
-pseudo-device sram # battery-backuped static RAM
-pseudo-device bell # OPM bell
-
-xcom0 at mainbus0 # NS16550 fast serial
-xcom1 at mainbus0
-
-## Audio device; broken
-#okiadpcm0 at intio0 addr 0xe92000 intr 106 errintr 107 dma 3
-#audio* at okiadpcm*
-
-## Network interfaces
-neptune0 at intio0 addr 0xece000 intr 249 # Neptune-X
-neptune1 at intio0 addr 0xece400 intr 249 # Neptune-X at alt. addr.
-ne0 at neptune? addr 0x300 # NE2000 or clone
-#se0 at scsibus? target ? lun ? # Ether+; broken
-
-
-#### Pseudo devices
-
-## A disk-like interface to files. Can be used to create floppy, CD,
-## miniroot images, etc.
-
-pseudo-device vnd 4
-
-## Concatenated and striped disks; with this, you can create a software-based
-## disk array similar to a "RAID 0" setup. See ccd(4).
-
-pseudo-device ccd 4
-
-## RAIDframe disk driver: software RAID driver. See raid(4).
-
-pseudo-device raid 4
-#options RAID_AUTOCONFIG # auto-configuration of RAID components
-
-## Memory disk device, used on boot floppies with compressed
-## kernel-plus-root-disk images.
-
-#pseudo-device md 1
-
-## Loopback network interface; required
-pseudo-device loop
-
-## SLIP and CSLIP interfaces, for IP over a serial line.
-pseudo-device sl 1
-
-## PPP, the successor to SLIP. See pppd(8).
-pseudo-device ppp 1
-
-## Network "tunnel" device, allowing protocol stacks to run in the userland.
-## This is used by the third-party user-mode "ppp" program, and others.
-pseudo-device tun 4
-
-## Generic L3 over IP tunnel
-#pseudo-device gre 2 # generic L3 over IP tunnel
-
-## Berkeley Packet Filter, required to run RARPD. A generic C-language
-## interface that allows selective examining of incoming packets.
-pseudo-device bpfilter 8
Home |
Main Index |
Thread Index |
Old Index