Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/trunk]: src/sys/arch/arc/dev Moved from /cvsroot/syssrc/sys/arch/arc/dev...



details:   https://anonhg.NetBSD.org/src/rev/035b1856c262
branches:  trunk
changeset: 481125:035b1856c262
user:      soda <soda%NetBSD.org@localhost>
date:      Sun Jan 23 20:43:35 2000 +0000

description:
Moved from /cvsroot/syssrc/sys/arch/arc/dev/if_sn.h,v

diffstat:

 sys/arch/arc/dev/if_snreg.h |  348 ++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 348 insertions(+), 0 deletions(-)

diffs (truncated from 352 to 300 lines):

diff -r eada1858c3f3 -r 035b1856c262 sys/arch/arc/dev/if_snreg.h
--- /dev/null   Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/arch/arc/dev/if_snreg.h       Sun Jan 23 20:43:35 2000 +0000
@@ -0,0 +1,348 @@
+/*     $NetBSD: if_snreg.h,v 1.4 2000/01/23 20:43:35 soda Exp $        */
+
+/*
+ * Copyright (c) 1991   Algorithmics Ltd (http://www.algor.co.uk)
+ * You may use, copy, and modify this program so long as you retain the
+ * copyright line.
+ */
+
+/*
+ * if_sonic.h -- National Semiconductor DP83932BVF (SONIC)
+ */
+
+/*
+ * Accessing SONIC data structures and registers as 32 bit values
+ * makes code endianess independent.  The SONIC is however always in
+ * bigendian mode so it is necessary to ensure that data structures shared
+ * between the CPU and the SONIC are always in bigendian order.
+ */
+
+/*
+ * Receive Resource Descriptor
+ * This structure describes the buffers into which packets
+ * will be received.  Note that more than one packet may be
+ * packed into a single buffer if constraints permit.
+ */
+#if SONICDW == 32
+struct RXrsrc {
+       u_long  buff_ptrlo;     /* buffer address LO */
+       u_long  buff_ptrhi;     /* buffer address HI */
+       u_long  buff_wclo;      /* buffer size (16bit words) LO */ 
+       u_long  buff_wchi;      /* buffer size (16bit words) HI */
+};
+#endif
+
+/*
+ * Receive Descriptor
+ * This structure holds information about packets received.
+ */
+#if SONICDW == 32
+struct RXpkt {
+       u_long  status;         /* + receive status */
+       u_long  byte_count;     /* + packet byte count (including FCS) */
+       u_long  pkt_ptrlo;      /* + packet data LO (in RBA) */
+       u_long  pkt_ptrhi;      /* + packet data HI (in RBA) */
+       u_long  seq_no;         /* + RBA sequence numbers */
+       u_long  rlink;          /* link to next receive descriptor */
+       u_long  in_use;         /* + packet available to SONIC */
+       u_long  pad;            /* pad to multiple of 16 bytes */
+};
+#endif
+#define RBASEQ(x) (((x)>>8)&0xff)
+#define PSNSEQ(x) ((x) & 0xff)
+
+/*
+ * Transmit Descriptor
+ * This structure holds information about packets to be transmitted.
+ */
+#define FRAGMAX        31              /* maximum number of fragments in a packet */
+#if SONICDW == 32
+struct TXpkt {
+       u_long  status;         /* + transmitted packet status */
+       u_long  config;         /* transmission configuration */
+       u_long  pkt_size;       /* entire packet size in bytes */
+       u_long  frag_count;     /* # fragments in packet */
+       union {
+               struct {
+                       u_long  _frag_ptrlo;    /* pointer to packet fragment LO */
+                       u_long  _frag_ptrhi;    /* pointer to packet fragment HI */
+                       u_long  _frag_size;     /* fragment size */
+               } u_frag;
+               struct {
+                       u_long  _tlink;         /* link to next transmit descriptor */
+               } u_link;
+       } u[FRAGMAX+1]; /* +1 makes tcp->u[FRAGMAX].u_link.link valid! */
+};
+#endif
+
+#define frag_ptrlo u_frag._frag_ptrlo
+#define frag_ptrhi u_frag._frag_ptrhi
+#define frag_size u_frag._frag_size
+#define tlink u_link._tlink
+
+#define EOL    0x0001          /* end of list marker for link fields */
+
+#define MAXCAM 16      /* number of user entries in CAM */
+#if SONICDW == 32
+struct CDA {
+       struct {
+               u_long  cam_ep;         /* CAM Entry Pointer */
+               u_long  cam_ap0;        /* CAM Address Port 0 xx-xx-xx-xx-YY-YY */
+               u_long  cam_ap1;        /* CAM Address Port 1 xx-xx-YY-YY-xxxx */
+               u_long  cam_ap2;        /* CAM Address Port 2 YY-YY-xx-xx-xx-xx */
+       } desc[MAXCAM];
+       u_long  enable;         /* mask enabling CAM entries */
+};
+#endif
+
+/*
+ * SONIC registers as seen by the processor
+ */
+struct sonic_reg {
+       volatile u_long s_cr;           /* 00: Command */
+       volatile u_long s_dcr;          /* 01: Data Configuration */
+       volatile u_long s_rcr;          /* 02: Receive Control */
+       volatile u_long s_tcr;          /* 03: Transmit Control */
+       volatile u_long s_imr;          /* 04: Interrupt Mask */
+       volatile u_long s_isr;          /* 05: Interrupt Status */
+       volatile u_long s_utda;         /* 06: Upper Transmit Descriptor Address */
+       volatile u_long s_ctda;         /* 07: Current Transmit Descriptor Address */
+       volatile u_long _s_tps;         /* 08* Transmit Packet Size */
+       volatile u_long _s_tfc;         /* 09* Transmit Fragment Count */
+       volatile u_long _s_tsa0;        /* 0a* Transmit Start Address 0 */
+       volatile u_long _s_tsa1;        /* 0b* Transmit Start Address 1 */
+       volatile u_long _s_tfs;         /* 0c* Transmit Fragment Size */
+       volatile u_long s_urda;         /* 0d: Upper Receive Descriptor Address */
+       volatile u_long s_crda;         /* 0e: Current Receive Descriptor Address */
+       volatile u_long _s_crba0;       /* 0f* Current Receive Buffer Address 0 */
+       volatile u_long _s_crba1;       /* 10* Current Receive Buffer Address 1 */
+       volatile u_long _s_rbwc0;       /* 11* Remaining Buffer Word Count 0 */
+       volatile u_long _s_rbwc1;       /* 12* Remaining Buffer Word Count 1 */
+       volatile u_long s_eobc;         /* 13: End Of Buffer Word Count */
+       volatile u_long s_urra;         /* 14: Upper Receive Resource Address */
+       volatile u_long s_rsa;          /* 15: Resource Start Address */
+       volatile u_long s_rea;          /* 16: Resource End Address */
+       volatile u_long s_rrp;          /* 17: Resource Read Pointer */
+       volatile u_long s_rwp;          /* 18: Resource Write Pointer */
+       volatile u_long _s_trba0;       /* 19* Temporary Receive Buffer Address 0 */
+       volatile u_long _s_trba1;       /* 1a* Temporary Receive Buffer Address 1 */
+       volatile u_long _s_tbwc0;       /* 1b* Temporary Buffer Word Count 0 */
+       volatile u_long _s_tbwc1;       /* 1c* Temporary Buffer Word Count 1 */
+       volatile u_long _s_addr0;       /* 1d* Address Generator 0 */
+       volatile u_long _s_addr1;       /* 1e* Address Generator 1 */
+       volatile u_long _s_llfa;        /* 1f* Last Link Field Address */
+       volatile u_long _s_ttda;        /* 20* Temp Transmit Descriptor Address */
+       volatile u_long s_cep;          /* 21: CAM Entry Pointer */
+       volatile u_long s_cap2;         /* 22: CAM Address Port 2 */
+       volatile u_long s_cap1;         /* 23: CAM Address Port 1 */
+       volatile u_long s_cap0;         /* 24: CAM Address Port 0 */
+       volatile u_long s_ce;           /* 25: CAM Enable */
+       volatile u_long s_cdp;          /* 26: CAM Descriptor Pointer */
+       volatile u_long s_cdc;          /* 27: CAM Descriptor Count */
+       volatile u_long s_sr;           /* 28: Silicon Revision */
+       volatile u_long s_wt0;          /* 29: Watchdog Timer 0 */
+       volatile u_long s_wt1;          /* 2a: Watchdog Timer 1 */
+       volatile u_long s_rsc;          /* 2b: Receive Sequence Counter */
+       volatile u_long s_crct;         /* 2c: CRC Error Tally */
+       volatile u_long s_faet;         /* 2d: FAE Tally */
+       volatile u_long s_mpt;          /* 2e: Missed Packet Tally */
+       volatile u_long _s_mdt;         /* 2f* Maximum Deferral Timer */
+       volatile u_long _s_rtc;         /* 30* Receive Test Control */
+       volatile u_long _s_ttc;         /* 31* Transmit Test Control */
+       volatile u_long _s_dtc;         /* 32* DMA Test Control */
+       volatile u_long _s_cc0;         /* 33* CAM Comparison 0 */
+       volatile u_long _s_cc1;         /* 34* CAM Comparison 1 */
+       volatile u_long _s_cc2;         /* 35* CAM Comparison 2 */
+       volatile u_long _s_cm;          /* 36* CAM Match */
+       volatile u_long :32;            /* 37* reserved */
+       volatile u_long :32;            /* 38* reserved */
+       volatile u_long _s_rbc;         /* 39* Receiver Byte Count */
+       volatile u_long :32;            /* 3a* reserved */
+       volatile u_long _s_tbo;         /* 3b* Transmitter Backoff Counter */
+       volatile u_long _s_trc;         /* 3c* Transmitter Random Counter */
+       volatile u_long _s_tbm;         /* 3d* Transmitter Backoff Mask */
+       volatile u_long :32;            /* 3e* Reserved */
+       volatile u_long s_dcr2;         /* 3f Data Configuration 2 (AVF) */
+};
+
+/*
+ * Register Interpretations
+ */
+
+/*
+ * The command register is used for issuing commands to the SONIC.
+ * With the exception of CR_RST, the bit is reset when the operation
+ * completes.
+ */
+#define CR_LCAM                0x0200  /* load CAM with descriptor at s_cdp */
+#define CR_RRRA                0x0100  /* read next RRA descriptor at s_rrp */
+#define CR_RST         0x0080  /* software reset */
+#define CR_ST          0x0020  /* start timer */
+#define CR_STP         0x0010  /* stop timer */
+#define CR_RXEN                0x0008  /* receiver enable */
+#define CR_RXDIS       0x0004  /* receiver disable */
+#define CR_TXP         0x0002  /* transmit packets */
+#define CR_HTX         0x0001  /* halt transmission */
+
+/*
+ * The data configuration register establishes the SONIC's bus cycle
+ * operation.  This register can only be accessed when the SONIC is in
+ * reset mode (s_cr.CR_RST is set.)
+ */
+#define DCR_EXBUS      0x8000  /* extended bus mode (AVF) */
+#define DCR_LBR                0x2000  /* latched bus retry */
+#define DCR_PO1                0x1000  /* programmable output 1 */
+#define DCR_PO0                0x0800  /* programmable output 0 */
+#define DCR_STERM      0x0400  /* synchronous termination */
+#define DCR_USR1       0x0200  /* reflects USR1 input pin */
+#define DCR_USR0       0x0100  /* reflects USR0 input pin */
+#define DCR_WC1                0x0080  /* wait state control 1 */
+#define DCR_WC0                0x0040  /* wait state control 0 */
+#define DCR_DW         0x0020  /* data width select */
+#define DCR_BMS                0x0010  /* DMA block mode select */
+#define DCR_RFT1       0x0008  /* receive FIFO threshold control 1 */
+#define DCR_RFT0       0x0004  /* receive FIFO threshold control 0 */
+#define DCR_TFT1       0x0002  /* transmit FIFO threshold control 1 */
+#define DCR_TFT0       0x0001  /* transmit FIFO threshold control 0 */
+
+/* data configuration register aliases */
+#define DCR_SYNC       DCR_STERM /* synchronous (memory cycle 2 clocks) */
+#define DCR_ASYNC      0         /* asynchronous (memory cycle 3 clocks) */
+
+#define DCR_WAIT0      0                 /* 0 wait states added */
+#define DCR_WAIT1      DCR_WC0           /* 1 wait state added */
+#define DCR_WAIT2      DCR_WC1           /* 2 wait states added */
+#define DCR_WAIT3      (DCR_WC1|DCR_WC0) /* 3 wait states added */
+
+#define DCR_DW16       0       /* use 16-bit DMA accesses */
+#define DCR_DW32       DCR_DW  /* use 32-bit DMA accesses */
+
+#define DCR_DMAEF      0       /* DMA until TX/RX FIFO has emptied/filled */
+#define DCR_DMABLOCK   DCR_BMS /* DMA until RX/TX threshold crossed */
+
+#define DCR_RFT4       0               /* receive threshold 4 bytes */
+#define DCR_RFT8       DCR_RFT0        /* receive threshold 8 bytes */
+#define DCR_RFT16      DCR_RFT1        /* receive threshold 16 bytes */
+#define DCR_RFT24      (DCR_RFT1|DCR_RFT0) /* receive threshold 24 bytes */
+
+#define DCR_TFT8       0               /* transmit threshold 8 bytes */
+#define DCR_TFT16      DCR_TFT0        /* transmit threshold 16 bytes */
+#define DCR_TFT24      DCR_TFT1        /* transmit threshold 24 bytes */
+#define DCR_TFT28      (DCR_TFT1|DCR_TFT0) /* transmit threshold 28 bytes */
+
+/*
+ * The receive control register is used to filter incoming packets and
+ * provides status information on packets received.
+ * The contents of the register are copied into the RXpkt.status field
+ * when a packet is received. RCR_MC - RCR_PRX are then reset.
+ */
+#define RCR_ERR                0x8000  /* accept packets with CRC errors */
+#define RCR_RNT                0x4000  /* accept runt (length < 64) packets */
+#define RCR_BRD                0x2000  /* accept broadcast packets */
+#define RCR_PRO                0x1000  /* accept all physical address packets */
+#define RCR_AMC                0x0800  /* accept all multicast packets */
+#define RCR_LB1                0x0400  /* loopback control 1 */
+#define RCR_LB0                0x0200  /* loopback control 0 */
+#define RCR_MC         0x0100  /* multicast packet received */
+#define RCR_BC         0x0080  /* broadcast packet received */
+#define RCR_LPKT       0x0040  /* last packet in RBA (RBWC < EOBC) */
+#define RCR_CRS                0x0020  /* carrier sense activity */
+#define RCR_COL                0x0010  /* collision activity */
+#define RCR_CRC                0x0008  /* CRC error */
+#define RCR_FAE                0x0004  /* frame alignment error */
+#define RCR_LBK                0x0002  /* loopback packet received */
+#define RCR_PRX                0x0001  /* packet received without errors */
+
+/* receiver control register aliases */
+/* the loopback control bits provide the following options */
+#define RCR_LBNONE     0               /* no loopback - normal operation */
+#define RCR_LBMAC      RCR_LB0         /* MAC loopback */
+#define RCR_LBENDEC    RCR_LB1         /* ENDEC loopback */
+#define RCR_LBTRANS    (RCR_LB1|RCR_LB0) /* transceiver loopback */
+
+/*
+ * The transmit control register controls the SONIC's transmit operations.
+ * TCR_PINT - TCR_EXDIS are loaded from the TXpkt.config field at the
+ * start of transmission.  TCR_EXD-TCR_PTX are cleared at the beginning
+ * of transmission and updated when the transmission is completed.
+ */
+#define TCR_PINT       0x8000  /* interrupt when transmission starts */
+#define TCR_POWC       0x4000  /* program out of window collision timer */
+#define TCR_CRCI       0x2000  /* transmit packet without 4 byte FCS */
+#define TCR_EXDIS      0x1000  /* disable excessive deferral timer */
+#define TCR_EXD                0x0400  /* excessive deferrals occurred (>3.2ms) */
+#define TCR_DEF                0x0200  /* deferred transmissions occurred */
+#define TCR_NCRS       0x0100  /* carrier not present during transmission */
+#define TCR_CRSL       0x0080  /* carrier lost during transmission */
+#define TCR_EXC                0x0040  /* excessive collisions (>16) detected */
+#define TCR_OWC                0x0020  /* out of window (bad) collision occurred */
+#define TCR_PMB                0x0008  /* packet monitored bad - the tansmitted
+                                * packet had a bad source address or CRC */
+#define TCR_FU         0x0004  /* FIFO underrun (memory access failed) */
+#define TCR_BCM                0x0002  /* byte count mismatch (TXpkt.pkt_size
+                                * != sum(TXpkt.frag_size) */
+#define TCR_PTX                0x0001  /* packet transmitted without errors */
+
+/* transmit control register aliases */
+#define TCR_OWCSFD     0        /* start after start of frame delimiter */
+#define TCR_OWCPRE     TCR_POWC /* start after first bit of preamble */
+
+
+/*
+ * The interrupt mask register masks the interrupts that
+ * are generated from the interrupt status register.
+ * All reserved bits should be written with 0.
+ */
+#define IMR_BREN       0x4000  /* bus retry occurred enable */



Home | Main Index | Thread Index | Old Index