Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/pmax/conf Withdraw this configuration. NetBSD/pmax...
details: https://anonhg.NetBSD.org/src/rev/c96c68771bb1
branches: trunk
changeset: 487300:c96c68771bb1
user: nisimura <nisimura%NetBSD.org@localhost>
date: Tue Jun 06 00:02:24 2000 +0000
description:
Withdraw this configuration. NetBSD/pmax GENERIC is now switched to
MI SCSI.
diffstat:
sys/arch/pmax/conf/DS5000 | 212 ----------------------------------------------
1 files changed, 0 insertions(+), 212 deletions(-)
diffs (216 lines):
diff -r da49442a7237 -r c96c68771bb1 sys/arch/pmax/conf/DS5000
--- a/sys/arch/pmax/conf/DS5000 Mon Jun 05 23:44:55 2000 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,212 +0,0 @@
-#
-# $NetBSD: DS5000,v 1.2 2000/05/28 06:02:12 gmcgarry Exp $
-#
-# Distribution kernel (any model) kernel config file
-#
-include "arch/pmax/conf/std.pmax"
-
-#ident "GENERIC-$Revision: 1.2 $"
-
-maxusers 64
-
-options MIPS1 # R2000/R3000 CPUs
-options MIPS3 # R4000/R4400 CPUs
-
-
-# Support for specific models of DECstation
-#options DEC_3100 # DECstation 2100, 3100 (kn01)
-#options DEC_5100 # DECsystem 5100 (kn230)
-options DEC_3MAX # DECstation 5000/200 (kn02)
-options DEC_3MIN # DECstation 5000/1xx (kn02ba), 5000/150 (kn04)
-options DEC_MAXINE # Personal DECstation 5000/xx (kn02ca)
-options DEC_3MAXPLUS # DECstation 5000/240 (kn03), 5000/260 (kn05)
-
-#options DEC_5400 # DECsystem 5400 (kn210)
-#options DEC_5500 # DECsystem 5500 (kn220)
-#options DEC_5800 # DECsystem 58x0 (kn5800)
-
-# Standard system options
-options DDB # in-kernel debugger
-#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
-options DDB_ONPANIC=0 # don't enter debugger on panic
-#options DIAGNOSTIC # extra kernel debugging checks
-#options DEBUG # extra kernel debugging support
-options "COMPAT_43" # compatibility with 4.3BSD binaries
-options KTRACE # system call tracing support
-
-options SYSVMSG # System V-like message queues
-options SYSVSEM # System V-like semaphores
-options SYSVSHM # System V-like memory sharing
-#options SHMMAXPGS=1024 # 1024 pages is the default
-
-options LKM # loadable kernel modules
-
-#options SCSIVERBOSE # Verbose SCSI errors
-
-# Old 4.4BSD/pmax kgdb options
-#options KGDB # support for kernel gdb
-#options "KGDBRATE=19200" # kernel gdb port rate (default 9600)
-#options "KGDBDEV=15*256+0" # device for kernel gdb
-
-options NTP # network time protocol
-#options UCONSOLE # users can redirect console (unsafe)
-
-
-# Filesystem options
-file-system FFS # fast filesystem with user and group quotas
-file-system MFS # memory-based filesystem
-file-system NFS # Sun NFS-compatible filesystem (client)
-file-system LFS # Log-based filesystem (still experimental)
-file-system CD9660 # ISO 9660 + Rock Ridge file system
-file-system FDESC # /dev/fd
-file-system KERNFS # /kern (kernel informational filesystem)
-file-system NULLFS # loopback file system
-file-system OVERLAY # overlay file system
-file-system PORTAL # portal filesystem (still experimental)
-file-system PROCFS # /proc
-file-system UMAPFS # NULLFS + uid and gid remapping
-file-system UNION
-
-options NFSSERVER # Sun NFS-compatible filesystem (server)
-options QUOTA # UFS quotas
-#options FFS_EI # FFS Endian Independant support
-#options SOFTDEP # FFS soft updates support.
-
-# Pull in config fragments for kernel crypto. This is required for
-# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
-# one of these, based on whether you use crypto-us or crypto-intl, and
-# adjust the prefixes as necessary.
-
-#prefix ../crypto-us/sys
-#cinclude "conf/files.crypto-us"
-#prefix
-
-#prefix ../crypto-intl/sys
-#cinclude "conf/files.crypto-intl"
-#prefix
-
-# Networking options
-options INET # Internet protocols
-options INET6 # IPV6
-#options IPSEC # IP security
-#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
-#options IPSEC_DEBUG # debug for IP security
-options "TCP_COMPAT_42" # compatibility with 4.2BSD TCP/IP
-options GATEWAY # IP packet forwarding
-#options MROUTING # Multicast routing support
-#options ISO # OSI networking
-#options TPIP # TPIP
-#options EON # OSI tunneling over IP
-#options CCITT,LLC,HDLC # X.25
-options NETATALK # AppleTalk networking protocols
-options PPP_BSDCOMP # BSD-Compress compression support for PPP
-options PPP_DEFLATE # Deflate compression support for PPP
-options PPP_FILTER # Active filter support for PPP (requires bpf)
-options PFIL_HOOKS # pfil(9) packet filter hooks
-options IPFILTER_LOG # ipmon(8) log support
-
-# NetBSD backwards compatibility
-#options COMPAT_10 # NetBSD 1.0, (needed for X on 386?)
-#options COMPAT_11 # NetBSD 1.1,
-options COMPAT_12 # Netbsd 1.2 reboot()
-options COMPAT_13 # Netbsd 1.3
-options COMPAT_14 # Netbsd 1.4
-
-# Raster console options
-options FONT_BOLD8x16 # Font for fb devices
-options FONT_LUCIDA16x29 # Font for px devices
-#options FONT_GALLANT12x22
-#options FONT_QVSS8x15
-
-# pmax specific
-options COMPAT_ULTRIX # Ultrix compatibility
-options EXEC_ECOFF # Ultrix RISC binaries are ECOFF format
-options "HZ=256" # RTC rate required
-
-options NFS_BOOT_DHCP # superset of BOOTP
-
-config netbsd root on ? type ?
-#config nfsnetbsd root on ? type nfs
-
-
-mainbus0 at root
-cpu* at mainbus0
-
-## Peripheral Bus Support (for devices to attach to)
-## ----------------------------------------------------------------------------
-
-# TURBOchannel bus support
-tc* at mainbus0
-
-# 3MIN, 3MAX+ and MAXINE have IOASIC in system slot
-ioasic0 at tc?
-mcclock* at ioasic? offset ? # DS1287 RTC
-le* at ioasic? offset ? # LANCE
-scc* at ioasic? offset ? # Z85C30
-bba* at ioasic? offset ? # MAXINE baseboard audio
-audio* at bba?
-dtop* at ioasic? offset ? # MAXINE kbd and mouse
-#fdc at ioasic? offset ? # MAXINE floppy disk (not supported)
-xasc* at ioasic? offset ? # NCR53C94 SCSI with IOASIC
-
-# 3MAX has TURBOchannel but no IOASIC
-ibus0 at tc? slot ? offset ? # 3MAX system slot
-
-# PMAX, 3MAX and MIPSMATE common devices
-mcclock* at ibus0 addr ? # DS1287 RTC
-dc* at ibus0 addr ? # DC7085 quad line serial device
-
-# TURBOchannel devices
-mfb* at tc? slot ? offset ? # PMAG-A MX Monochrome Framebuffer
-cfb* at tc? slot ? offset ? # PMAG-B CX Color Framebuffer
-#tfb* at tc? slot ? offset ? # PMAG-RO TX True Color Framebuffer
-sfb* at tc? slot ? offset ? # PMAGB-B HX Smart Framebuffer
-px0 at tc? slot ? offset ? # PMAG-C,D,E,F PX family
-#sfbp* at tc? slot ? offset ? # PMAGD HX+ Smart Framebuffer
-xcfb* at tc? slot ? offset ? # PMAG-DV Color Framebuffer at MAXINE
-xasc* at tc? slot ? offset ? # PMAZ-A single channel SCSI
-le* at tc? slot ? offset ? # PMAD-A LANCE
-fta* at tc? slot ? offset ? # PMAF-F FDDI
-#tcds* at tc? slot ? offset ? # PMAZB/PMAZC dual channel SCSI
-#asc* at tcds? chip ?
-
-# PMAX and MIPSMATE
-#ibus0 at mainbus0
-#pm* at ibus0 addr ? # 3100 onboard fb
-#le* at ibus0 addr ? # 3100, 5100 onboard LANCE
-#sii* at ibus0 addr ? # DC7061 onboard SCSI
-
-#########################################################################
-# SCSI configuration #
-#########################################################################
-
-# old 4.4BSD/pmax DECstation SCSI driver
-#oldscsibus* at sii?
-#oldscsibus* at asc?
-#include "arch/pmax/conf/scsi.pmax"
-
-# MI SCSI configuration
-include "arch/pmax/conf/mi.scsi" # DS5000 only
-
-#########################################################################
-# Pseudo-devices #
-#########################################################################
-
-pseudo-device loop 1 # network loopback
-pseudo-device sl 4 # serial-line IP ports
-pseudo-device ppp 2 # serial-line IP ports
-pseudo-device pty 64 # pseudo ptys
-pseudo-device bpfilter 16 # packet filter ports
-pseudo-device ipfilter # IP filter, NAT
-#pseudo-device gre 2 # generic L3 over IP tunnel
-pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
-#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
-
-pseudo-device vnd 4 # virtual disk ick
-pseudo-device ccd 4 # concatenated disks
-#pseudo-device raid 4 # RAIDframe disk driver
-
-pseudo-device rasterconsole 1 # NB: raster console requires "fb"
-pseudo-device fb 3 # up to 3 framebuffers
-
-pseudo-device rnd # /dev/random and in-kernel generator
Home |
Main Index |
Thread Index |
Old Index