Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/amiga/conf Regenerate with new m4 mechanism (vs old...
details: https://anonhg.NetBSD.org/src/rev/348c94f5a121
branches: trunk
changeset: 532997:348c94f5a121
user: lukem <lukem%NetBSD.org@localhost>
date: Tue Jun 18 17:45:13 2002 +0000
description:
Regenerate with new m4 mechanism (vs old cpp mechanism).
New files are same as old (except for whitespace differences), except
that the new GENERIC doesn't have melody, because GENERIC defines
DRACO and the latter can't have it.
diffstat:
sys/arch/amiga/conf/AMIGA | 205 ++++++++++++++++++----------------
sys/arch/amiga/conf/DRACO | 176 +++++++++++++++++-------------
sys/arch/amiga/conf/GENERIC | 109 +++---------------
sys/arch/amiga/conf/INSTALL | 204 +++++++++++++++++++---------------
sys/arch/amiga/conf/WSCONS | 255 ++++++++++++++++++++-----------------------
5 files changed, 460 insertions(+), 489 deletions(-)
diffs (truncated from 1946 to 300 lines):
diff -r b243c4a952ec -r 348c94f5a121 sys/arch/amiga/conf/AMIGA
--- a/sys/arch/amiga/conf/AMIGA Tue Jun 18 17:39:39 2002 +0000
+++ b/sys/arch/amiga/conf/AMIGA Tue Jun 18 17:45:13 2002 +0000
@@ -1,38 +1,42 @@
-# $NetBSD: AMIGA,v 1.52 2002/06/17 05:27:59 lukem Exp $
+# $NetBSD: AMIGA,v 1.53 2002/06/18 17:45:13 lukem Exp $
+#
+# This file was automatically created.
+# Changes will be lost when make is run in this directory.
+#
+# Created from: # NetBSD: GENERIC.in,v 1.1 2002/06/18 17:39:39 lukem Exp $
+#
+# GENERIC machine description file
#
-# This file was automatically created. Changes will be
-# lost when running make in this directory.
+# This machine description file is used to generate the default NetBSD
+# kernel. The generic kernel does not include all options, subsystems
+# and device drivers, but should be useful for most applications.
+#
+# The machine description file can be customised for your specific
+# machine to reduce the kernel size and improve its performance.
#
-# Created from: #NetBSD: GENERIC,v 1.181 2002/06/17 05:14:05 lukem Exp $
-
-#GENERIC machine description file
+# For further information on compiling NetBSD kernels, see the config(8)
+# man page.
+#
+# For further information on hardware support for this architecture, see
+# the intro(4) man page. For further information about kernel options
+# for this architecture, see the options(4) man page. For an explanation
+# of each device driver in this file see the section 4 man page for the
+# device.
-#This machine description file is used to generate the default NetBSD
-#kernel. The generic kernel does not include all options, subsystems
-#and device drivers, but should be useful for most applications.
-#The machine description file can be customised for your specific
-#machine to reduce the kernel size and improve its performance.
-
-#For further information on compiling NetBSD kernels, see the config(8)
-#man page.
-
-#For further information on hardware support for this architecture, see
-#the intro(4) man page. For further information about kernel options
-#for this architecture, see the options(4) man page. For an explanation
-#of each device driver in this file see the section 4 man page for the
-#device.
include "arch/amiga/conf/std.amiga"
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
-#ident "GENERIC-$Revision: 1.52 $"
+#ident "GENERIC-$Revision: 1.53 $"
+
maxusers 8
options RTC_OFFSET=0
-#mainboards to support (in addition to Amiga)
-
+#
+# mainboards to support (in addition to Amiga)
+#
options BB060STUPIDROM # You need this, if you have a non-DraCo
# MC68060 with an OS ROM up to (at least)
# V40 (OS3.1) and want to boot with the
@@ -40,20 +44,20 @@
# You do not need this if you have a DraCo,
# have no 68060 or NEVER use the bootblock
options P5PPC68KBOARD # Phase5 PPC/68K board support
-
-#processors this kernel should support
-
+#
+# processors this kernel should support
+#
options M68060 # support for 060
options M060SP # MC68060 software support (Required for 060)
-
options M68040 # support for 040
options FPSP # MC68040 floating point support
options M68030 # support for 030
options M68020 # support for 020/851
options FPU_EMULATE # FPU emulation
-#Networking options
-
+#
+# Networking options
+#
options INET # IP networking support (Required)
options INET6 # IPV6
#options IPSEC # IP security
@@ -77,6 +81,7 @@
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
+# Filesystems
file-system FFS # Berkeley fast file system
file-system EXT2FS # second extended file system (linux)
#file-system LFS # log-structured filesystem (experimental)
@@ -98,7 +103,7 @@
file-system UMAPFS # NULLFS + uid and gid remapping
file-system UNION # union filesystem
-#Filesystem options
+# Filesystem options
#options FFS_EI # FFS Endian Independant support
@@ -109,7 +114,9 @@
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
-#Compatibility options for various existing systems
+#
+# Compatibility options for various existing systems
+#
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
options COMPAT_43 # compatibility with 4.3BSD interfaces
@@ -126,8 +133,9 @@
options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x)
options COMPAT_AOUT_M68K # actually make some system calls work.
-#Support for System V IPC facilities.
-
+#
+# Support for System V IPC facilities.
+#
options SYSVSHM # System V-like shared memory
options SYSVMSG # System V-like messages
options SYSVSEM # System V-like semaphores
@@ -136,21 +144,22 @@
#options SEMUME=10 # max number of undo entries per process
#options SEMMNU=30 # number of undo structures in system
-#Support for various kernel options
+#
+# Support for various kernel options
+#
options KTRACE # system call tracing support
options LKM # Loadable kernel modules
options UCONSOLE # anyone can redirect a virtual console
-
#options INSECURE # disable kernel security levels
options SCSIVERBOSE # human readable SCSI error messages
#options USERCONF # userconf(4) support
+options NTP # NTP phase/frequency locked loop
+#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
-options NTP # NTP phase/frequency locked loop
-#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
-
-#Misc. debugging options
-
+#
+# Misc. debugging options
+#
options DDB # Kernel debugger
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
options DIAGNOSTIC # Extra kernel sanity checks
@@ -159,8 +168,9 @@
#options SCSIDEBUG # Add SCSI debugging statements
#options PANICBUTTON # Forced crash via keypress (?)
-#Amiga specific options
-
+#
+# Amiga specific options
+#
#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the
# first bank of RAM. (default: unlimited)
#options NKPTADD=4 # set this for 4 additional KPT pages
@@ -170,18 +180,17 @@
# increase NKPTADD if you get "out of PT pages"
# panics.
-#ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
-#before the 10 secondinterval ends, or that KBDRESET does work at all.
+# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
+# before the 10 secondinterval ends, or that KBDRESET does work at all.
#options KBDRESET # sync on Ctrl-Amiga-Amiga
-#These options improve performance with the built-in serial port
-#on slower Amigas. Try the larger buffers first then lev6_defer.
+# These options improve performance with the built-in serial port
+# on slower Amigas. Try the larger buffers first then lev6_defer.
#options SERIBUF_SIZE=4096
#options SEROBUF_SIZE=32
#options LEV6_DEFER # defers l6 to l4 (below serial l5)
options RETINACONSOLE # enable code to allow retina to be console
-
options ULOWELLCONSOLE # enable code to allow a2410 to be console
options CL5426CONSOLE # Cirrus console
options CV64CONSOLE # CyberVision console
@@ -195,46 +204,44 @@
options GRF_AGA # AGA Chip Set
options GRF_AGA_VGA # AGA VGAONLY timing
options GRF_SUPER72 # AGA Super-72
-
#options KFONT_8X11 # 8x11 font
-#select a font for the console according to the character set and keymap
-#you want to use
+# select a font for the console according to the character set and keymap
+# you want to use
options KFONT_CONS_ISO8859_1
#options KFONT_CONS_ISO8859_2
-#This is how you would tell the kernel the A2410 oscillator frequencies:
-#The used frequencies are the defaults, and do not need option setting
+# This is how you would tell the kernel the A2410 oscillator frequencies:
+# The used frequencies are the defaults, and do not need option setting
#options ULOWELL_OSC1=36000000
#options ULOWELL_OSC2=66667000
-#This is how you specify the blitting speed, higher values may speed up blits
-#a littel bit. If you raise this value too much some trash may appear.
-#the commented version is the default.
+# This is how you specify the blitting speed, higher values may speed up blits
+# a littel bit. If you raise this value too much some trash may appear.
+# the commented version is the default.
#options RH_MEMCLK=61000000
-#this option enables the 64 bit sprite which does not work
-#for quite a few people. E.g. The cursor sprite will turn to a block
-#when moved to the top of the screen in X.
+# this option enables the 64 bit sprite which does not work
+# for quite a few people. E.g. The cursor sprite will turn to a block
+# when moved to the top of the screen in X.
#options RH_64BIT_SPRITE
-#enables fast scroll code appears to now work on 040 systems.
+# enables fast scroll code appears to now work on 040 systems.
#options RETINA_SPEED_HACK
-#enables the Hardwarecursor which does not work on some systems.
+# enables the Hardwarecursor which does not work on some systems.
#options RH_HARDWARECURSOR
-#wscons aware interface to amiga custom chips.
-#If you enable it enable also wskbd.
+# wscons aware interface to amiga custom chips.
+# If you enable it enable also wskbd.
+#
#amidisplaycc0 at mainbus0 # wscons interface to custom chips
#wsdisplay0 at amidisplaycc0 console ?
-#options WSEMUL_VT100
-#options FONT_BOLD8x16
-#options FONT_VT220L8x10
+#options WSEMUL_VT100
+#options FONT_BOLD8x16
+#options FONT_VT220L8x10
grfcc0 at mainbus0 # custom chips
grfrt0 at zbus0 # retina II
-
grfrh0 at zbus0 # retina III
-
grfcl* at zbus0 # Picasso II/Piccolo/Spectrum
grful0 at zbus0 # A2410
grfcv0 at zbus0 # CyberVision 64
@@ -243,20 +250,15 @@
grf0 at grfcc0
grf1 at grfrt0
-
grf2 at grfrh0
-
grf3 at grfcl?
grf4 at grful0
grf5 at grfcv0
grf6 at grfet?
grf7 at grfcv3d0
-
ite0 at grf0 # terminal emulators for grfs
ite1 at grf1 # terminal emulators for grfs
-
ite2 at grf2 # terminal emulators for grfs
-
ite3 at grf3 # terminal emulators for grfs
ite4 at grf4 # terminal emulators for grfs
ite5 at grf5 # terminal emulators for grfs
@@ -285,14 +287,20 @@
com* at iobl? port ? # IOBlix serial ports
lpt* at iobl? port ? # IOBlix parallel ports
-#Keyboard device. Optionally can attach a wskbd.
-#wskbd works together with a wsdisplay so enable them both if you will.
-#Don't enable wskbd if you use ite.
+
#
-#XXX in std.amiga: kbd0 at mainbus0
+# Keyboard device. Optionally can attach a wskbd.
+# wskbd works together with a wsdisplay so enable them both if you will.
+# Don't enable wskbd if you use ite.
Home |
Main Index |
Thread Index |
Old Index