[src/trunk]: src/lib/librt Bring in sem_open (& sem_close & sem_unlink) man p...

[briggs <briggs%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/424fce82b11d
branches:  trunk
changeset: 573203:424fce82b11d
user:      briggs <briggs%NetBSD.org@localhost>
date:      Sat Jan 22 03:16:33 2005 +0000

description:
Bring in sem_open (& sem_close & sem_unlink) man page from FreeBSD.
These functions are actually implemented, but the old man page said that
they simply returned with errors--it was apparently out of date at the
time of import.

diffstat:

 lib/librt/sem_open.3 |  213 +++++++++++++++++++++++++++++++++++++++++++-------
 1 files changed, 180 insertions(+), 33 deletions(-)

diffs (244 lines):

diff -r 5186addfd1ce -r 424fce82b11d lib/librt/sem_open.3
--- a/lib/librt/sem_open.3      Sat Jan 22 02:24:31 2005 +0000
+++ b/lib/librt/sem_open.3      Sat Jan 22 03:16:33 2005 +0000
@@ -1,4 +1,4 @@
-.\" $NetBSD: sem_open.3,v 1.1 2003/01/24 01:52:44 thorpej Exp $
+.\" $NetBSD: sem_open.3,v 1.2 2005/01/22 03:16:33 briggs Exp $
 .\"
 .\" Copyright (C) 2000 Jason Evans <jasone%FreeBSD.org@localhost>.
 .\" All rights reserved.
@@ -27,7 +27,9 @@
 .\" OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 .\" EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd January 22, 2003
+.\" From: FreeBSD: src/lib/libc/gen/sem_open.3,v 1.12 2004/07/02 16:45:56 ru
+.\"
+.Dd January 21, 2005
 .Dt SEM_OPEN 3
 .Os
 .Sh NAME
@@ -36,47 +38,192 @@
 .Nm sem_unlink
 .Nd named semaphore operations
 .Sh LIBRARY
-.Lb librt
+.Lb libc
 .Sh SYNOPSIS
 .In semaphore.h
-.Ft sem_t *
-.Fn sem_open "const char *name" "int oflag" "..."
+.Ft "sem_t *"
+.Fn sem_open "const char *name" "int oflag" ...
 .Ft int
 .Fn sem_close "sem_t *sem"
 .Ft int
 .Fn sem_unlink "const char *name"
 .Sh DESCRIPTION
 The
+.Fn sem_open
+function creates or opens the named semaphore specified by
+.Fa name .
+The returned semaphore may be used in subsequent calls to
+.Xr sem_getvalue 3 ,
+.Xr sem_wait 3 ,
+.Xr sem_trywait 3 ,
+.Xr sem_post 3 ,
+and
+.Fn sem_close .
+.Pp
+The following bits may be set in the
+.Fa oflag
+argument:
+.Bl -tag -width ".Dv O_CREAT"
+.It Dv O_CREAT
+Create the semaphore if it does not already exist.
+.Pp
+The third argument to the call to
+.Fn sem_open
+must be of type
+.Vt mode_t
+and specifies the mode for the semaphore.
+Only the
+.Dv S_IWUSR , S_IWGRP ,
+and
+.Dv S_IWOTH
+bits are examined;
+it is not possible to grant only
+.Dq read
+permission on a semaphore.
+The mode is modified according to the process's file creation
+mask; see
+.Xr umask 2 .
+.Pp
+The fourth argument must be an
+.Vt "unsigned int"
+and specifies the initial value for the semaphore,
+and must be no greater than
+.Dv SEM_VALUE_MAX .
+.It Dv O_EXCL
+Create the semaphore if it does not exist.
+If the semaphore already exists,
+.Fn sem_open
+will fail.
+This flag is ignored unless
+.Dv O_CREAT
+is also specified.
+.El
+.Pp
+The
+.Fn sem_close
+function closes a named semaphore that was opened by a call to
+.Fn sem_open .
+.Pp
+The
+.Fn sem_unlink
+function removes the semaphore named
+.Fa name .
+Resources allocated to the semaphore are only deallocated when all
+processes that have the semaphore open close it.
+.Sh RETURN VALUES
+If successful,
+the
+.Fn sem_open
+function returns the address of the opened semaphore.
+If the same
+.Fa name
+argument is given to multiple calls to
+.Fn sem_open
+by the same process without an intervening call to
+.Fn sem_close ,
+the same address is returned each time.
+If the semaphore cannot be opened,
+.Fn sem_open
+returns
+.Dv SEM_FAILED
+and the global variable
+.Va errno
+is set to indicate the error.
+.Pp
+.Rv -std sem_close sem_unlink
+.Sh ERRORS
+The
+.Fn sem_open
+function will fail if:
+.Bl -tag -width Er
+.It Bq Er EACCES
+The semaphore exists and the permissions specified by
+.Fa oflag
+at the time it was created deny access to this process.
+.It Bq Er EACCES
+The semaphore does not exist, but permission to create it is denied.
+.It Bq Er EEXIST
+.Dv O_CREAT
+and
+.Dv O_EXCL
+are set but the semaphore already exists.
+.It Bq Er EINTR
+The call was interrupted by a signal.
+.It Bq Er EINVAL
+The
+.Fn sem_open
+operation is not supported for the given
+.Fa name .
+.It Bq Er EINVAL
+The
+.Fa value
+argument is greater than
+.Dv SEM_VALUE_MAX .
+.\"FreeBSD never returns EMFILE
+.\".It Bq Er EMFILE
+.\"Too many semaphores are in use by this process.
+.It Bq Er ENAMETOOLONG
+The
+.Fa name
+argument is too long.
+.It Bq Er ENFILE
+The system limit on semaphores has been reached.
+.It Bq Er ENOENT
+.Dv O_CREAT
+is set but the named semaphore does not exist.
+.It Bq Er ENOSPC
+There is not enough space to create the semaphore.
+.El
+.Pp
+The
+.Fn sem_close
+function will fail if:
+.Bl -tag -width Er
+.It Bq Er EINVAL
+The
+.Fa sem
+argument is not a valid semaphore.
+.El
+.Pp
+The
+.Fn sem_unlink
+function will fail if:
+.Bl -tag -width Er
+.It Bq Er EACCES
+Permission is denied to unlink the semaphore.
+.It Bq Er ENAMETOOLONG
+The specified
+.Fa name
+is too long.
+.It Bq Er ENOENT
+The named semaphore does not exist.
+.El
+.Sh SEE ALSO
+.Xr close 2 ,
+.Xr open 2 ,
+.Xr umask 2 ,
+.Xr unlink 2 ,
+.Xr sem_getvalue 3 ,
+.Xr sem_post 3 ,
+.Xr sem_trywait 3 ,
+.Xr sem_wait 3 ,
+.Xr sem 4
+.Sh STANDARDS
+The
 .Fn sem_open ,
 .Fn sem_close ,
 and
 .Fn sem_unlink
-functions are not supported by this implementation.
-.Sh RETURN VALUES
-.Fn sem_open
-returns SEM_FAILED and sets
-.Va errno
-to indicate an error.
-.Fn sem_close
-and
-.Fn sem_unlink
-return \-1 and set
-.Va errno
-to indicate an error.
-.Sh ERRORS
-.Fn sem_open ,
-.Fn sem_close ,
-and
-.Fn sem_unlink
-will fail:
-.Bl -tag -width Er
-.It Bq Er ENOSYS
-Function not supported by this implementation.
-.El
-.Sh STANDARDS
-.Fn sem_open ,
-.Fn sem_close ,
-and
-.Fn sem_unlink
-conform to
+functions conform to
 .St -p1003.1-96 .
+.Sh HISTORY
+Support for named semaphores first appeared in
+.Nx 2.0 .
+.Sh BUGS
+This implementation places strict requirements on the value of
+.Fa name :
+it must begin with a slash
+.Pq Ql / ,
+contain no other slash characters,
+and be less than 14 characters in length
+not including the terminating null character.