Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/netbsd-2-1]: src/sys/arch/atari/conf Regen for ticket 11356
details: https://anonhg.NetBSD.org/src/rev/b52c91eb7d89
branches: netbsd-2-1
changeset: 564273:b52c91eb7d89
user: bouyer <bouyer%NetBSD.org@localhost>
date: Sat Aug 11 14:41:23 2007 +0000
description:
Regen for ticket 11356
diffstat:
sys/arch/atari/conf/ATARITT | 368 +++++++++---------------------
sys/arch/atari/conf/BOOT | 191 +++++-----------
sys/arch/atari/conf/BOOTX | 204 +++++-----------
sys/arch/atari/conf/FALCON | 365 +++++++++---------------------
sys/arch/atari/conf/HADES | 430 +++++++++++------------------------
sys/arch/atari/conf/MILAN-ISAIDE | 432 ++++++++++--------------------------
sys/arch/atari/conf/MILAN-PCIIDE | 457 +++++++++++---------------------------
7 files changed, 756 insertions(+), 1691 deletions(-)
diffs (truncated from 2532 to 300 lines):
diff -r b5e157a7f291 -r b52c91eb7d89 sys/arch/atari/conf/ATARITT
--- a/sys/arch/atari/conf/ATARITT Sat Aug 11 14:40:55 2007 +0000
+++ b/sys/arch/atari/conf/ATARITT Sat Aug 11 14:41:23 2007 +0000
@@ -1,259 +1,125 @@
#
-# $NetBSD: ATARITT,v 1.59.2.3.2.1 2005/04/02 21:43:44 he Exp $
+# $NetBSD: ATARITT,v 1.59.2.3.2.1.2.1 2007/08/11 14:41:23 bouyer Exp $
#
# This file was automatically created. Changes will be
# lost when running makeconf in this directory.
#
# Created from:
# NetBSD: ATARITT.in,v 1.4 2001/04/10 06:28:38 leo Exp $
-# NetBSD: GENERIC.in,v 1.33.2.3 2004/07/15 20:18:24 he Exp $
-
-#This configuration file is for a GENERIC ATARI-TT
-
-#Generic atari
-
+# NetBSD: GENERIC.in,v 1.33.2.3.4.1 2007/08/11 14:40:05 bouyer Exp $
include "arch/atari/conf/std.atari"
-
-options INCLUDE_CONFIG_FILE # embed config file in kernel binary
-
-#Add support for about 16 users. This variable is used to size
-#various kernel structures.
-
-maxusers 16
-
-options HZ=64 # Set the clock-rate (48/64/96)
-
-#Standard system options
-options INSECURE # disable kernel security levels
-#options NTP # NTP phase/frequency locked loop
-
-#Enable experimental buffer queue strategy for better responsiveness under
-#high disk I/O load. Use it with caution - it's not proven to be stable yet.
-#options NEW_BUFQ_STRATEGY
-
-#(Co)processors this kernel should support
-
-options M68030 # support for 030
-options FPU_EMULATE # Support for MC68881/MC68882 emulator
-
-options M68040 # support for 040
-options FPSP # 68040 Floatingpoint support
-
-#Networking options
-
-options INET # IP + ICMP + TCP + UDP
-
-options INET6 # IPV6
-#options IPSEC # IP security
-#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
-#options IPSEC_DEBUG # debug for IP security
-#options GATEWAY # packet forwarding
-#options MROUTING # IP multicast routing
-options NS # XNS
-#options NSIP # XNS tunneling over IP
-options ISO,TPIP # OSI
-#options EON # OSI tunneling over IP
-options CCITT,LLC,HDLC # X.25
-
-options NETATALK # AppleTalk networking protocols
-
-options PPP_BSDCOMP # BSD-Compress compression support for PPP
-options PPP_DEFLATE # Deflate compression support for PPP
-options PPP_FILTER # Active filter support for PPP (requires bpf)
-
-options PFIL_HOOKS # pfil(9) packet filter hooks
-options IPFILTER_LOG # ipmon(8) log support
-#options IPFILTER_DEFAULT_BLOCK # block packages by default
-
-#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
-
-#options ALTQ # Manipulate network interfaces' output queues
-#options ALTQ_BLUE # Stochastic Fair Blue
-#options ALTQ_CBQ # Class-Based Queueing
-#options ALTQ_CDNR # Diffserv Traffic Conditioner
-#options ALTQ_FIFOQ # First-In First-Out Queue
-#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
-#options ALTQ_HFSC # Hierarchical Fair Service Curve
-#options ALTQ_LOCALQ # Local queueing discipline
-#options ALTQ_PRIQ # Priority Queueing
-#options ALTQ_RED # Random Early Detection
-#options ALTQ_RIO # RED with IN/OUT
-#options ALTQ_WFQ # Weighted Fair Queueing
-
-#File systems
-file-system FFS # Berkeley fast file system
-file-system MFS # Memory based filesystem
-file-system KERNFS # Kernel parameter filesystem
-file-system MSDOSFS # MSDOS filesystem
-file-system CD9660 # ISO 9660 filesystem with Rock Ridge
-
-file-system NFS # Network File System client side code
-file-system PROCFS # Process filesystem
-file-system FDESC # /dev/fd
-file-system NULLFS # Loopback filesystem
-file-system OVERLAY # overlay filesystem
-file-system UNION # union file system
-file-system UMAPFS # null file system (with uid & gid remapping)
-file-system PORTAL # portal file system
-file-system EXT2FS # second extended file system (linux)
-file-system LFS # log-structured file system
-
-#File system options
-options QUOTA # Disk quotas for local disks
-#options FFS_EI # FFS Endian Independant support
-options SOFTDEP # FFS soft updates support.
-options NFSSERVER # Network File System server side code
-#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
- # immutable) behave as system flags.
-
-#Misc. debugging options
-
-options PANICWAIT # Require keystroke to dump/reboot
-options DDB # Kernel debugger
-
-options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
-#options DEBUG # expensive debugging checks/support
-
-#Compatibility options for various existing systems
-
-options COMPAT_43 # 4.3 BSD compatible system calls (required)
-options COMPAT_10 # Compatibility to NetBSD1.0
-options COMPAT_11 # Compatibility to NetBSD1.1
-options COMPAT_12 # Compatibility to NetBSD1.2
-options COMPAT_13 # Compatibility to NetBSD1.3
-options COMPAT_14 # Compatibility to NetBSD1.4
-options COMPAT_15 # Compatibility to NetBSD1.5
-options COMPAT_16 # Compatibility to NetBSD1.6
-
-#options COMPAT_09 # has no meaning on the atari
-#options COMPAT_SUNOS # Support to run Sun-3 executables
-#options COMPAT_SVR4 # Support to run SVR4 executables
-#options COMPAT_LINUX # Support to run Linux/m68k executables
-#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
-
-options COMPAT_AOUT_M68K # Compatibility to a.out executables
-options EXEC_AOUT # a.out format executables
-
-#Support for System V IPC facilities.
-
-options SYSVSHM # System V shared memory
-options SYSVMSG # System V messages
-options SYSVSEM # System V semaphores
-#options SEMMNI=10 # number of semaphore identifiers
-#options SEMUME=10 # max number of undo entries per proc.
-#options SEMMNU=30 # number of undo structures in system
-options P1003_1B_SEMAPHORE # p1003.1b semaphore support
-
-#Support for various kernel options
-
-options KTRACE # Add kernel tracing system call
-options SYSTRACE # system call vetting via systrace(1)
-options DIAGNOSTIC # Add additional error checking code
-options USERCONF # userconf(4) support
-#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
-options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
-
-#These options enable verbose messages for several subsystems.
-#Warning, these may compile large string tables into the kernel!
-
-options SCSIVERBOSE # human readable SCSI error messages
-
-#Atari specific options
-
-#options KFONT_8x8 # Use 8x8 font instead of 8x16
-options ST_POOL_SIZE=22 # smallest that allows TT-HIGH
-
-options TT_SCSI # SCSI-support for TT
-options TT_VIDEO # Graphics support for TT
-#options ET4000_HAS_2MB_MEM # et4000 with 2 MB video memory
-
-options MEMORY_DISK_HOOKS # Boot RAM-disk
-options DISKLABEL_NBDA # NetBSD disklabels (required)
-options DISKLABEL_AHDI # NetBSD/AHDI disklabels
-
-options SERCONSOLE # modem1 console support
-options RELOC_KERNEL # TT/Falcon: relocate kernel to TT-RAM
-options MSGBUFSIZE=32768 # size of kernel msg. buffer
-#options STATCLOCK # Separate {stat,prof}clock
-
-#Try linked commands on all targets
-options TRY_SCSI_LINKED_COMMANDS=0x7f
-
-#Build one kernel that can boot from any disk.
-
-config netbsd root on ? type ?
-
-pseudo-device sl # Slip
-pseudo-device ppp # ppp
-
-pseudo-device pppoe # PPP over Ethernet (RFC 2516)
-
-pseudo-device pty # pseudo-terminals
-pseudo-device loop # Loopback network
-pseudo-device vnd 3 # 3 pseudo disks (see vnconfig)
-pseudo-device md 3 # Boot memory disk
-
-pseudo-device bpfilter 2 # berkeley packet filters
-pseudo-device tun 2 # network tunnel
-#pseudo-device gre 2 # generic L3 over IP tunnel
-pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
-#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
-#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
-
-pseudo-device vlan # IEEE 802.1q encapsulation
-pseudo-device bridge # simple inter-network bridging
-
-pseudo-device ccd 4 # concatenating disk driver
-#pseudo-device cgd 4 # cryptographic disk driver
-pseudo-device raid 8 # RAIDframe disk driver
-options RAID_AUTOCONFIG # auto-configuration of RAID components
-#Options to enable various other RAIDframe RAID types.
-#options RF_INCLUDE_EVENODD=1
-#options RF_INCLUDE_RAID5_RS=1
-#options RF_INCLUDE_PARITYLOGGING=1
-#options RF_INCLUDE_CHAINDECLUSTER=1
-#options RF_INCLUDE_INTERDECLUSTER=1
-#options RF_INCLUDE_PARITY_DECLUSTERING=1
-#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
-pseudo-device ipfilter # IP filtering device
-pseudo-device rnd # /dev/random and in-kernel generator
-pseudo-device clockctl # user control of clock subsystem
-
-#Hardware options for GENERIC are in the various machine type specific files
-
-pseudo-device view 4 # View (graphics mapping)
-
-pseudo-device mouse 1 # mouse
-
-#The following sections describe various hardware options.
-
-ncrscsi0 at mainbus0 # NCR5380 SCSI driver
-scsibus0 at ncrscsi0 # SCSI bus
-zs0 at mainbus0 # Serial support through 8530
-grfbus0 at mainbus0 # bitmapped display's
-grfcc0 at grfbus0 # graphics driver
-ite0 at grfcc0 # console
-nvr0 at mainbus0 # nvram driver
-
-grfcc1 at grfbus0 # 2nd graphics driver
-ite1 at grfcc1 # 2nd tty
-grfcc2 at grfbus0 # 3rd graphics driver
-ite2 at grfcc2 # 3rd tty
-lp0 at mainbus0 # centronics printer
-ser0 at mainbus0 # UART on first 68901 (ttyB0)
-avmebus0 at mainbus0 # VME bus
-vme0 at avmebus0
-le0 at vme0 irq 5 # Lance ethernet (Riebl/PAM).
-le0 at vme0 irq 4 # Lance ethernet (BVME410).
-et0 at vme0 # Crazy Dots II
-
-#SCSI devices
-sd* at scsibus? target ? lun ? # SCSI disk drives
-st* at scsibus? target ? lun ? # SCSI tape drives
-cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
-
-ch* at scsibus? target ? lun ? # SCSI autochangers
-ss* at scsibus? target ? lun ? # SCSI scanners
-se* at scsibus? target ? lun ? # SCSI ethernet
-uk* at scsibus? target ? lun ? # SCSI unknown
-
+options INCLUDE_CONFIG_FILE # embed config file in kernel binary
+maxusers 16
+options HZ=64 # Set the clock-rate (48/64/96)
+options INSECURE # disable kernel security levels
+options M68030 # support for 030
+options FPU_EMULATE # Support for MC68881/MC68882 emulator
+options M68040 # support for 040
+options FPSP # 68040 Floatingpoint support
+options INET # IP + ICMP + TCP + UDP
+options INET6 # IPV6
+options NS # XNS
+options CCITT,LLC,HDLC # X.25
+options NETATALK # AppleTalk networking protocols
+options PPP_BSDCOMP # BSD-Compress compression support for PPP
+options PPP_DEFLATE # Deflate compression support for PPP
+options PPP_FILTER # Active filter support for PPP (requires bpf)
+options PFIL_HOOKS # pfil(9) packet filter hooks
+options IPFILTER_LOG # ipmon(8) log support
+file-system FFS # Berkeley fast file system
+file-system MFS # Memory based filesystem
+file-system KERNFS # Kernel parameter filesystem
+file-system MSDOSFS # MSDOS filesystem
+file-system CD9660 # ISO 9660 filesystem with Rock Ridge
+file-system NFS # Network File System client side code
+file-system PROCFS # Process filesystem
+file-system FDESC # /dev/fd
+file-system NULLFS # Loopback filesystem
+file-system OVERLAY # overlay filesystem
+file-system UNION # union file system
+file-system UMAPFS # null file system (with uid & gid remapping)
+file-system PORTAL # portal file system
+file-system EXT2FS # second extended file system (linux)
+file-system LFS # log-structured file system
+options QUOTA # Disk quotas for local disks
+options SOFTDEP # FFS soft updates support.
Home |
Main Index |
Thread Index |
Old Index