[src/trunk]: src/usr.sbin/isdn/isdnd Drop some unnecessary empty lines, impro...

[wiz <wiz%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/dccb7c7f4db9
branches:  trunk
changeset: 520886:dccb7c7f4db9
user:      wiz <wiz%NetBSD.org@localhost>
date:      Sat Jan 19 03:18:35 2002 +0000

description:
Drop some unnecessary empty lines, improve markup in some places.

diffstat:

 usr.sbin/isdn/isdnd/isdnd.rc.5 |  100 ++--------------------------------------
 1 files changed, 5 insertions(+), 95 deletions(-)

diffs (truncated from 640 to 300 lines):

diff -r 073d5905aff9 -r dccb7c7f4db9 usr.sbin/isdn/isdnd/isdnd.rc.5
--- a/usr.sbin/isdn/isdnd/isdnd.rc.5    Sat Jan 19 03:17:42 2002 +0000
+++ b/usr.sbin/isdn/isdnd/isdnd.rc.5    Sat Jan 19 03:18:35 2002 +0000
@@ -1,4 +1,4 @@
-.\" $NetBSD: isdnd.rc.5,v 1.3 2001/04/09 19:34:16 wiz Exp $
+.\" $NetBSD: isdnd.rc.5,v 1.4 2002/01/19 03:18:35 wiz Exp $
 .\"
 .\" Copyright (c) 1997, 2000 Hellmuth Michaelis. All rights reserved.
 .\"
@@ -23,7 +23,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.\"    $Id: isdnd.rc.5,v 1.3 2001/04/09 19:34:16 wiz Exp $
+.\"    $Id: isdnd.rc.5,v 1.4 2002/01/19 03:18:35 wiz Exp $
 .\"
 .\" $FreeBSD$
 .\"
@@ -82,19 +82,16 @@
 .Nm isdnd :
 .Pp
 .Bl -tag -width system -compact
-
 .It Li system
 This keyword starts the system configuration section. It must not
 have a parameter and may be used only once. The keyword is mandatory.
 The following keywords are valid in the system configuration section:
 .Bl -tag -width useacctfile -compact
-
 .It Li acctall
 If this parameter is set to
 .Em on ,
 accounting information is written even if the local site was not charged
 or no charging information is available or is not subscribed. (optional)
-
 .It Li acctfile
 Specifies the name of the accounting file which is used when the keyword
 .Em useacctfile
@@ -103,14 +100,12 @@
 See also system keyword
 .Em rotatesuffix .
 If this keyword is omitted the system default is used. (optional)
-
 .It Li aliasing
 If this parameter is set to
 .Em on ,
 alias processing of telephone-number to name is enabled (see also the
 .Em aliasfile
 keyword below). The default is off. (optional)
-
 .It Li aliasfile
 Specifies the name of the telephone number-to-name alias database file shared
 with the
@@ -118,31 +113,26 @@
 utility when alias processing is enabled via the
 .Em aliasing
 keyword. (optional)
-
 .It Li beepconnect
 In full-screen mode, if this parameter is set to
 .Em on ,
 ring the bell when connecting or disconnecting a call.
-
 .It Li extcallattr
 If this parameter is set to
 .Em on ,
 the extended caller attributes "screening indicator" and "presentation
 indicator" are written to the log-file.
 The default is off. (optional)
-
 .It Li holidayfile
 Specifies the name of the holiday file containing the dates of holidays.
 This file is used in conjunction with the
 .Em valid
 keyword to lookup the dates of holidays. (optional)
-
 .It Li isdntime
 If this parameter is set to
 .Em on ,
 date/time information from the exchange (if provided) is written to the
 log-file. The default is off. (optional)
-
 .It Li mailer
 This keyword is used to specify the path/name of a mail program which
 which is able to use the "-s" flag to specify a subject on its
@@ -152,7 +142,6 @@
 the keyword
 .Em mailto .
 (optional)
-
 .It Li mailto
 This keyword is used to specify the email address of someone to notify
 in case of a fatal error exit of
@@ -160,7 +149,6 @@
 (See also keyword
 .Em mailer ) .
 (optional)
-
 .It Li monitor-allowed
 If this parameter is set to
 .Em on
@@ -170,11 +158,9 @@
 This parameter is optional and is set to
 .Em off
 by default.
-
 .It Li monitor-port
 sets the TCP port number for remote monitoring.
 This integer parameter is optional and is set to port 451 by default.
-
 .It Li monitor
 This keyword specifies a local socket name or a host or network for remote
 monitoring. The
@@ -193,7 +179,6 @@
 .It Ar a resolvable network name with netmask
 example: up-vision-net/24
 .El
-
 .It Li monitor-access
 This keyword specifies the access rights for a previously used
 .Em monitor
@@ -207,11 +192,9 @@
 .It Ar callin
 .It Ar callout
 .El
-
 .It Li ratesfile
 Specifies the name of the ratesfile. If this keyword is omitted the system
 default is used. (optional)
-
 .It Li regexpr
 This keyword is used to specify regular expressions. It can be specified
 more than once up to a compile time dependent value (currently set to 5 by
@@ -235,7 +218,6 @@
 Hint: it might be necessary to properly quote the expression to avoid
 improper interpretation by the configuration file parser.
 (optional)
-
 .It Li regprog
 This keyword is used to specify the name of a program which is run in
 case a corresponding regular expression is matched by a logging string.
@@ -244,7 +226,6 @@
 .Pa /etc/isdn
 which is prepended to the string specified as a parameter to this keyword.
 (optional)
-
 .It Li rotatesuffix
 Specifies a suffix for renaming the log- and the accounting-filename. In case
 rotatesuffix is used and a USR1 signal is sent to isdnd, the log-file and the
@@ -252,7 +233,6 @@
 renamed to the former filename with the rotatesuffix string appended.
 If this keyword is omitted, the log-files are just closed and reopened; this
 is also the default behavior. (optional)
-
 .\" .It Li rtprio
 .\" Specifies the real-time priority
 .\" .Nm isdnd
@@ -272,16 +252,13 @@
 .Em on
 charging (if available) and accounting information is written to the
 accounting file. (optional)
-
 .El
-
 .It Li controller
 This keyword starts the controller configuration section. It must not
 have a parameter and may be used once for every controller. The keyword
 is optional. The following keywords are valid in a controller
 configuration section:
 .Bl -tag -width useacctfile -compact
-
 .It Li protocol
 This keyword is used to set the D-channel protocol for the S0-bus a
 controller is connected to. The following parameters are currently
@@ -295,13 +272,11 @@
 An ISDN leased line with a single B-channel (called D64S in Germany).
 .El
 .El
-
 .It Li entry
 This keyword starts one configuration entry. It must not have a parameter.
 This keyword must be used at least once.
 The following keywords are valid in an entry section:
 .Bl -tag -width unitlengthsrc -compact
-
 .It Li answerprog
 This keyword is used to specify the name of a program which is run in
 case an incoming telephone connection specified
@@ -313,7 +288,6 @@
 .Pa /etc/isdn
 which is prepended to the string specified as a parameter to this keyword.
 (optional)
-
 .It Li alert
 is used to specify a time in seconds to wait before accepting a call. This
 keyword is only usable for incoming telephone calls (dialin-reaction = answer).
@@ -321,7 +295,6 @@
 the answering machine starts to run. The minimum value for the alert parameter
 is 5 seconds and the maximum parameter allowed is 180 seconds.
 (optional)
-
 .It Li b1protocol
 The B channel layer 1 protocol used for this connection. The keyword is mandatory.
 The currently configurable values are:
@@ -332,25 +305,21 @@
 .It Ar raw
 No framing at all (used for telephony).
 .El
-
 .It Li budget-calloutperiod
 is used to specify a time period in seconds. Within this period, the number of calls
 specified by
 .Em budget-calloutncalls
 are allowed to succeed, any further attempt to call out will be blocked for the rest
 of the time left in the time period. (optional)
-
 .It Li budget-calloutncalls
 The number of outgoing calls allowed within the time period specified by
 .Em budget-calloutperiod .
 (optional)
-
 .It Li budget-calloutsfile
 A path/filename to which the number of successfull callouts are written.
 The contents of the file is preserved when it exists during startup of isdnd.
 The format of this file is: start time, last update time, number of calls.
 (optional)
-
 .It Li budget-calloutsfile-rotate
 If set to
 .Em on
@@ -358,7 +327,6 @@
 the file on a new day. The statistics for the previous day are witten to
 a file with the filename specified by budget-calloutsfile to which a hyphen
 and the new day's (!) day of month number is appended. (optional)
-
 .It Li budget-callbackperiod
 .It Li budget-callbackncalls
 .It Li budget-callbacksfile
@@ -369,15 +337,12 @@
 .Em budget-calloutsfile
 .Em budget-calloutsfile-rotate
 above. These are used to specify the budgets for calling back a remote site.
-
 .It Li callbackwait
 The time in seconds to wait between hanging up the call from a remote site
 and calling back the remote site. (optional)
-
 .It Li calledbackwait
 The time in seconds to wait for a remote site calling back the local site
 after a call from the local site to the remote site has been made. (optional)
-
 .It Li connectprog
 specifies a program run every time after a connection is established and
 address negotiation is complete (i.e.: the connection is usable).
@@ -395,7 +360,6 @@
 .Em addr
 the address that got assigned to the interface as a dotted-quad ip address
 (optional, only if it can be figured out by isdnd). (optional)
-
 .It Li dialin-reaction
 Used to specify what to do when an incoming connection request is received.
 The keyword is mandatory.
@@ -413,7 +377,6 @@
 .It Ar callback
 When a remote site calls, hang up and call back the remote site.
 .El
-
 .It Li dialout-type
 This keyword is used to configure what type of dialout mode is used.
 The keyword is mandatory.
@@ -426,26 +389,22 @@
 Callback behavior, call the remote side which rejects the call and calls
 us back.
 .El
-
 .It Li dialrandincr
 When dialing or re-dialing and this parameter is set to
 .Em on ,
 the dial retry time is added with a random value (currently 0...3 seconds)
 to minimize the chance of two sites dialing synchronously so each gets a busy
 each time it dials because the other side is also dialing.
-
 .It Li dialretries
 The number of dialing retries before giving up.
 Setting this to
 .Em -1
 gives an unlimited number of retries! (optional)
-
 .It Li direction
 This keyword is used to configure if incoming and outgoing, incoming-only or
 outgoing only connections are possible.
 The keyword is optional, the default is
 .Em inout .
-
 .Pp
 The currently supported parameters are:
 .Pp
@@ -457,7 +416,6 @@
 .It Ar out
 Only outgoing connections are possible.