[src/trunk]: src/sys/dev/usb ULPI register definitions

[bsh <bsh%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/f61a358e7ea7
branches:  trunk
changeset: 759067:f61a358e7ea7
user:      bsh <bsh%NetBSD.org@localhost>
date:      Sat Nov 27 13:41:49 2010 +0000

description:
ULPI register definitions

diffstat:

 sys/dev/usb/ulpireg.h |  88 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 88 insertions(+), 0 deletions(-)

diffs (92 lines):

diff -r e2f9a9cc060e -r f61a358e7ea7 sys/dev/usb/ulpireg.h
--- /dev/null   Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/dev/usb/ulpireg.h     Sat Nov 27 13:41:49 2010 +0000
@@ -0,0 +1,88 @@
+/*     $NetBSD: ulpireg.h,v 1.1 2010/11/27 13:41:49 bsh Exp $  */
+/*
+ * Copyright (c) 2009, 2010  Genetec Corporation.  All rights reserved.
+ * Written by Hashimoto Kenichi for Genetec Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL GENETEC CORPORATION
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _DEV_USB_ULPI_ULPIREG_H
+#define        _DEV_USB_ULPI_ULPIREG_H
+
+/* commands */
+#define        ULPI_CMD_SPECIAL        (0x0 << 6)
+#define        ULPI_CMD_NOOP           (ULPI_CMD_SPECIAL | 0x00)
+#define        ULPI_CMD_TRANSMIT       (0x1 << 6)
+#define        ULPI_CMD_PID(n)         (ULPI_CMD_TRANSMIT | (n))
+#define        ULPI_CMD_REGWRITE       (0x2 << 6)
+#define        ULPI_CMD_EXTW           (ULPI_CMD_REGWRITE | 0x2f)
+#define        ULPI_CMD_REGREAD        (0x3 << 6)
+#define        ULPI_CMD_EXTR           (ULPI_CMD_REGREAD | 0x2f)
+
+/* registers */
+#define        ULPI_VENDOR_ID_LOW              0x00
+#define        ULPI_VENDOR_ID_HIGH             0x01
+#define        ULPI_PRODUCT_ID_LOW             0x02
+#define        ULPI_PRODUCT_ID_HIGH            0x03
+#define        ULPI_FUNCTION_CONTROL           0x04
+#define         FUNCTION_CONTROL_XCVRSELECT    __BITS(0,1)
+#define         XCVRSELECT_HS                  0x0
+#define         XCVRSELECT_FS                  0x1
+#define         XCVRSELECT_LS                  0x2
+#define         XCVRSELECT_FSLS                0x3  /* FS Xceiver for LS packets */
+#define         FUNCTION_CONTROL_TERMSELECT    __BIT(2)
+#define         FUNCTION_CONTROL_OPMODE        __BITS(3,4)
+#define         FUNCTION_CONTROL_RESET         __BIT(5)
+#define         FUNCTION_CONTROL_SUSPENDM      __BIT(6)
+#define        ULPI_INTERFACE_CONTROL          0x07
+#define        ULPI_OTG_CONTROL                0x0a
+#define         OTG_CONTROL_IDPULLUP           __BIT(0)        /* ID pull up */
+#define         OTG_CONTROL_DPPULLDOWN         __BIT(1)        /* D+ pull down */
+#define         OTG_CONTROL_DMPULLDOWN         __BIT(2)        /* D- pull down */
+#define         OTG_CONTROL_DISCHRGVBUS        __BIT(3)        /* discharge Vbus */
+#define         OTG_CONTROL_CHRGVBUS           __BIT(4)        /* charge Vbus */
+#define         OTG_CONTROL_DRVVBUS            __BIT(5)        /* drive 5V on Vbus */
+#define         OTG_CONTROL_DRVVBUSEXT         __BIT(6)        /* drive Vbus external */
+#define         OTG_CONTROL_USEEXTVBUSIND      __BIT(7)        /* use external Vbus over-current
+                                                          indecator */
+#define        ULPI_USB_INT_RISING_EDGE        0x0d
+#define        ULPI_USB_INT_FALLING_EDGE       0x10
+#define        ULPI_USB_INT_STATUS             0x13
+#define        ULPI_USB_INTERRUPT_LATCH        0x14
+#define        ULPI_DEBUG                      0x15
+#define        ULPI_SCRATCH                    0x16
+#define        ULPI_CARKIT_CONTROL             0x19
+#define        ULPI_CARKIT_INTERRUPT_DELAY     0x1c
+#define        ULPI_CARKIT_INTERRUPT_ENABLE    0x1d
+#define        ULPI_CARKIT_INTERRUPT_STATUS    0x20
+#define        ULPI_CARKIT_INTERRUPT_LATCH     0x21
+#define        ULPI_CARKIT_PULSE_CONTROL       0x22
+#define        ULPI_TRANSMIT_POSITIVE_WIDTH    0x25
+#define        ULPI_TRANSMIT_NEGATIVE_WIDTH    0x26
+#define        ULPI_RECEIVE_POLARITY_RECOVERY  0x27
+
+#define        ULPI_VENDOR_SPECIFIC            0x30
+
+#define        ULPI_REG_WRITE          0
+#define        ULPI_REG_SET            1
+#define        ULPI_REG_CLEAR          2
+
+#endif /* _DEV_USB_ULPI_ULPIREG_H */