[src/trunk]: src/sys/arch/arc/pci Use fixed pci_intr_handle_t per device numb...

[tsutsui <tsutsui%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/32ed51408c87
branches:  trunk
changeset: 758331:32ed51408c87
user:      tsutsui <tsutsui%NetBSD.org@localhost>
date:      Tue Nov 02 16:03:47 2010 +0000

description:
Use fixed pci_intr_handle_t per device number regardless of pin and swiz.

Tested the following multifunction card and devices over ppb(4)
on Express5800/230 (JC94):

---
uhci0 at pci0 dev 4 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x61)
uhci0: interrupting at int C
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 4 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x61)
uhci1: interrupting at int C
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 4 function 2: VIA Technologies VT8237 EHCI USB Controller (rev. 0x63)
ehci0: interrupting at int C
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
fwohci0 at pci0 dev 4 function 3: VIA Technologies VT6306 IEEE 1394 Host Controller (rev. 0x46)
fwohci0: interrupting at int C
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:01:08:00:37:02:79:4f
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 1024 bytes.
fwohci0: max_rec 1024 -> 2048
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
vge0 at pci0 dev 4 function 4: VIA VT612X Gigabit Ethernet (rev. 0x11)
vge0: interrupting at int C
vge0: Ethernet address: 00:01:08:00:b1:71
ciphy0 at vge0 phy 1: Cicada CS8201 10/100/1000TX PHY, rev. 2
ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
 :
---
ppb0 at pci0 dev 4 function 0: Digital Equipment DC21154 PCI-PCI Bridge (rev. 0x05)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ex0 at pci1 dev 4 function 0: 3Com 3c980C-TXM 10/100 Ethernet (rev. 0x78)
ex0: interrupting at int C
ex0: MAC address 00:01:03:ce:74:48
bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 7
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex1 at pci1 dev 5 function 0: 3Com 3c980C-TXM 10/100 Ethernet (rev. 0x78)
ex1: interrupting at int C
ex1: MAC address 00:01:03:ce:74:49
bmtphy1 at ex1 phy 24: Broadcom 3c905C internal PHY, rev. 7
bmtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 :

diffstat:

 sys/arch/arc/pci/necpb.c |  11 +++++------
 1 files changed, 5 insertions(+), 6 deletions(-)

diffs (43 lines):

diff -r 8fb56b990ac6 -r 32ed51408c87 sys/arch/arc/pci/necpb.c
--- a/sys/arch/arc/pci/necpb.c  Tue Nov 02 15:50:09 2010 +0000
+++ b/sys/arch/arc/pci/necpb.c  Tue Nov 02 16:03:47 2010 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: necpb.c,v 1.32 2008/07/05 08:46:25 tsutsui Exp $       */
+/*     $NetBSD: necpb.c,v 1.33 2010/11/02 16:03:47 tsutsui Exp $       */
 
 /*-
  * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
@@ -61,7 +61,7 @@
  */
 
 #include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: necpb.c,v 1.32 2008/07/05 08:46:25 tsutsui Exp $");
+__KERNEL_RCSID(0, "$NetBSD: necpb.c,v 1.33 2010/11/02 16:03:47 tsutsui Exp $");
 
 #include "opt_pci.h"
 
@@ -339,7 +339,6 @@
        pci_chipset_tag_t pc = pa->pa_pc;
        pcitag_t intrtag = pa->pa_intrtag;
        int pin = pa->pa_intrpin;
-       int swiz = pa->pa_intrswiz % 4;
        int bus, dev;
 
        if (pin == 0) {
@@ -363,13 +362,13 @@
 
        switch (dev) {
        case 3:
-               *ihp = (pin - swiz + 2) % 4;
+               *ihp = 3;
                break;
        case 4:
-               *ihp = (pin - swiz + 1) % 4;
+               *ihp = 2;
                break;
        case 5:
-               *ihp = (pin - swiz + 0) % 4;
+               *ihp = 1;
                break;
        default:
                *ihp = -1;