Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sbin/raidctl Update RUMP_ACTION to use rumpclient.
details: https://anonhg.NetBSD.org/src/rev/cf329e939ac5
branches: trunk
changeset: 758562:cf329e939ac5
user: pooka <pooka%NetBSD.org@localhost>
date: Mon Nov 08 12:42:35 2010 +0000
description:
Update RUMP_ACTION to use rumpclient.
The server must of course have some disks configured. Let's say
we have this simple server with disks as a few sparse host files:
main()
{
rump_init();
rump_pub_etfs_register("/disk1", "./disk1.img", RUMP_ETFS_BLK);
rump_pub_etfs_register("/disk2", "./disk2.img", RUMP_ETFS_BLK);
rump_pub_etfs_register("/disk3", "./disk3.img", RUMP_ETFS_BLK);
rump_pub_etfs_register("/disk4", "./disk4.img", RUMP_ETFS_BLK);
pause();
}
And we run the server:
mainbus0 (root)
Kernelized RAIDframe activated
/disk1: hostpath ./disk1.img (97 GB)
/disk2: hostpath ./disk2.img (97 GB)
/disk3: hostpath ./disk3.img (97 GB)
/disk4: hostpath ./disk4.img (97 GB)
We can then configure the raid against the server:
> ./raidctl -c theraid.conf raid0
And lo, we have evidence of a level1 raid in the server dmesg:
raid0: RAID Level 1
raid0: Components: /disk1 /disk2 /disk3 /disk4
raid0: Total Sectors: 409599744 (199999 MB)
yea, i initialized it already in a previous run:
> ./raidctl -S raid0
Reconstruction is 100% complete.
Parity Re-write is 100% complete.
Copyback is 100% complete.
diffstat:
sbin/raidctl/Makefile | 5 ++---
sbin/raidctl/raidctl.c | 10 +++++++---
2 files changed, 9 insertions(+), 6 deletions(-)
diffs (59 lines):
diff -r 5734401d7a8d -r cf329e939ac5 sbin/raidctl/Makefile
--- a/sbin/raidctl/Makefile Mon Nov 08 12:06:47 2010 +0000
+++ b/sbin/raidctl/Makefile Mon Nov 08 12:42:35 2010 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: Makefile,v 1.14 2009/10/11 12:51:58 pooka Exp $
+# $NetBSD: Makefile,v 1.15 2010/11/08 12:42:35 pooka Exp $
PROG= raidctl
SRCS= rf_configure.c raidctl.c
@@ -9,8 +9,7 @@
.ifdef RUMP_ACTION
CPPFLAGS+= -DRUMP_ACTION -DRUMP_SYS_IOCTL -DRUMP_SYS_CLOSE
-LDADD+= -lrumpdev_disk -lrumpdev_raidframe -lrumpdev
-LDADD+= -lrumpvfs -lrump -lrumpuser -lpthread
+LDADD+= -lrumpclient
DBG= -g
.endif
diff -r 5734401d7a8d -r cf329e939ac5 sbin/raidctl/raidctl.c
--- a/sbin/raidctl/raidctl.c Mon Nov 08 12:06:47 2010 +0000
+++ b/sbin/raidctl/raidctl.c Mon Nov 08 12:42:35 2010 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: raidctl.c,v 1.48 2010/03/16 03:23:47 jld Exp $ */
+/* $NetBSD: raidctl.c,v 1.49 2010/11/08 12:42:35 pooka Exp $ */
/*-
* Copyright (c) 1996, 1997, 1998 The NetBSD Foundation, Inc.
@@ -39,7 +39,7 @@
#include <sys/cdefs.h>
#ifndef lint
-__RCSID("$NetBSD: raidctl.c,v 1.48 2010/03/16 03:23:47 jld Exp $");
+__RCSID("$NetBSD: raidctl.c,v 1.49 2010/11/08 12:42:35 pooka Exp $");
#endif
@@ -58,8 +58,11 @@
#include <unistd.h>
#include <util.h>
+#ifdef RUMP_ACTION
#include <rump/rump.h>
+#include <rump/rumpclient.h>
#include <rump/rump_syscalls.h>
+#endif
#include <dev/raidframe/raidframevar.h>
#include <dev/raidframe/raidframeio.h>
@@ -125,7 +128,8 @@
openmode = O_RDWR; /* default to read/write */
#ifdef RUMP_ACTION
- rump_init();
+ if (rumpclient_init() == -1)
+ err(1, "rump client init failed");
#endif
while ((ch = getopt(argc, argv, "a:A:Bc:C:f:F:g:GiI:l:mM:r:R:sSpPuv"))
Home |
Main Index |
Thread Index |
Old Index