Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/dev/usb Fix kern/41737 -- add quirks to make MS Wireless...
details: https://anonhg.NetBSD.org/src/rev/e56481826ab8
branches: trunk
changeset: 748816:e56481826ab8
user: rafal <rafal%NetBSD.org@localhost>
date: Fri Nov 06 04:42:27 2009 +0000
description:
Fix kern/41737 -- add quirks to make MS Wireless Laser Mouse 6000 work.
diffstat:
sys/dev/usb/uhidev.c | 20 +++++-----
sys/dev/usb/ums.c | 95 ++++++++++++++++++++++++++++++++++++---------------
2 files changed, 77 insertions(+), 38 deletions(-)
diffs (238 lines):
diff -r 29177f796047 -r e56481826ab8 sys/dev/usb/uhidev.c
--- a/sys/dev/usb/uhidev.c Thu Nov 05 21:26:25 2009 +0000
+++ b/sys/dev/usb/uhidev.c Fri Nov 06 04:42:27 2009 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: uhidev.c,v 1.43 2009/09/23 19:07:19 plunky Exp $ */
+/* $NetBSD: uhidev.c,v 1.44 2009/11/06 04:42:27 rafal Exp $ */
/*
* Copyright (c) 2001 The NetBSD Foundation, Inc.
@@ -35,7 +35,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: uhidev.c,v 1.43 2009/09/23 19:07:19 plunky Exp $");
+__KERNEL_RCSID(0, "$NetBSD: uhidev.c,v 1.44 2009/11/06 04:42:27 rafal Exp $");
#include <sys/param.h>
#include <sys/systm.h>
@@ -105,7 +105,7 @@
struct uhidev_attach_arg uha;
device_t dev;
struct uhidev *csc;
- int size, nrepid, repid, repsz;
+ int maxinpktsize, size, nrepid, repid, repsz;
int *repsizes;
int i;
void *desc;
@@ -140,6 +140,7 @@
(void)usbd_set_protocol(iface, 1);
#endif
+ maxinpktsize = 0;
sc->sc_iep_addr = sc->sc_oep_addr = -1;
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
@@ -161,6 +162,7 @@
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
(ed->bmAttributes & UE_XFERTYPE) == UE_INTERRUPT) {
+ maxinpktsize = UGETW(ed->wMaxPacketSize);
sc->sc_iep_addr = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
(ed->bmAttributes & UE_XFERTYPE) == UE_INTERRUPT) {
@@ -265,8 +267,10 @@
aprint_error_dev(self, "no memory\n");
USB_ATTACH_ERROR_RETURN;
}
+
+ /* Just request max packet size for the interrupt pipe */
+ sc->sc_isize = maxinpktsize;
sc->sc_nrepid = nrepid;
- sc->sc_isize = 0;
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
USBDEV(sc->sc_dev));
@@ -275,12 +279,8 @@
repsz = hid_report_size(desc, size, hid_input, repid);
DPRINTF(("uhidev_match: repid=%d, repsz=%d\n", repid, repsz));
repsizes[repid] = repsz;
- if (repsz > 0) {
- if (repsz > sc->sc_isize)
- sc->sc_isize = repsz;
- }
}
- sc->sc_isize += nrepid != 1; /* space for report ID */
+
DPRINTF(("uhidev_attach: isize=%d\n", sc->sc_isize));
uha.parent = sc;
@@ -478,7 +478,7 @@
rep, scd, scd ? scd->sc_state : 0));
if (!(scd->sc_state & UHIDEV_OPEN))
return;
- if (scd->sc_in_rep_size != cc) {
+ if (scd->sc_in_rep_size > cc) {
printf("%s: bad input length %d != %d\n",
USBDEVNAME(sc->sc_dev), scd->sc_in_rep_size, cc);
return;
diff -r 29177f796047 -r e56481826ab8 sys/dev/usb/ums.c
--- a/sys/dev/usb/ums.c Thu Nov 05 21:26:25 2009 +0000
+++ b/sys/dev/usb/ums.c Fri Nov 06 04:42:27 2009 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: ums.c,v 1.74 2009/03/09 15:59:33 uebayasi Exp $ */
+/* $NetBSD: ums.c,v 1.75 2009/11/06 04:42:27 rafal Exp $ */
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc.
@@ -35,7 +35,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: ums.c,v 1.74 2009/03/09 15:59:33 uebayasi Exp $");
+__KERNEL_RCSID(0, "$NetBSD: ums.c,v 1.75 2009/11/06 04:42:27 rafal Exp $");
#include <sys/param.h>
#include <sys/systm.h>
@@ -94,6 +94,7 @@
#define UMS_Z 0x01 /* z direction available */
#define UMS_SPUR_BUT_UP 0x02 /* spurious button up events */
#define UMS_REVZ 0x04 /* Z-axis is reversed */
+#define UMS_W 0x08 /* w direction/tilt available */
int nbuttons;
@@ -151,7 +152,8 @@
int size;
void *desc;
u_int32_t flags, quirks;
- int i, wheel;
+ int i, hl;
+ struct hid_location *zloc;
struct hid_location loc_btn;
aprint_naive("\n");
@@ -197,10 +199,16 @@
}
/* Try the wheel first as the Z activator since it's tradition. */
- wheel = hid_locate(desc, size, HID_USAGE2(HUP_GENERIC_DESKTOP,
- HUG_WHEEL),
- uha->reportid, hid_input, &sc->sc_loc_z, &flags);
- if (wheel) {
+ hl = hid_locate(desc,
+ size,
+ HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_WHEEL),
+ uha->reportid,
+ hid_input,
+ &sc->sc_loc_z,
+ &flags);
+
+ zloc = &sc->sc_loc_z;
+ if (hl) {
if ((flags & MOUSE_FLAGS_MASK) != MOUSE_FLAGS) {
aprint_verbose("\n%s: Wheel report 0x%04x not "
"supported\n", USBDEVNAME(sc->sc_hdev.sc_dev),
@@ -210,33 +218,59 @@
sc->flags |= UMS_Z;
/* Wheels need the Z axis reversed. */
sc->flags ^= UMS_REVZ;
+ /* Put Z on the W coordinate */
+ zloc = &sc->sc_loc_w;
}
- /*
- * We might have both a wheel and Z direction, if so put
- * put the Z on the W coordinate.
- */
- if (hid_locate(desc, size, HID_USAGE2(HUP_GENERIC_DESKTOP,
- HUG_Z),
- uha->reportid, hid_input, &sc->sc_loc_w, &flags)) {
- if ((flags & MOUSE_FLAGS_MASK) != MOUSE_FLAGS) {
- aprint_verbose("\n%s: Z report 0x%04x not "
- "supported\n",
- USBDEVNAME(sc->sc_hdev.sc_dev), flags);
- sc->sc_loc_w.size = 0; /* Bad Z, ignore */
- }
- }
- } else if (hid_locate(desc, size, HID_USAGE2(HUP_GENERIC_DESKTOP,
- HUG_Z),
- uha->reportid, hid_input, &sc->sc_loc_z, &flags)) {
+ }
+
+ hl = hid_locate(desc,
+ size,
+ HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_Z),
+ uha->reportid,
+ hid_input,
+ zloc,
+ &flags);
+
+ /*
+ * The horizontal component of the scrollball can also be given by
+ * Application Control Pan in the Consumer page, so if we didnt see
+ * any Z then check that.
+ */
+ if (!hl) {
+ hl = hid_locate(desc,
+ size,
+ HID_USAGE2(HUP_CONSUMER, HUC_AC_PAN),
+ uha->reportid,
+ hid_input,
+ zloc,
+ &flags);
+ }
+
+ if (hl) {
if ((flags & MOUSE_FLAGS_MASK) != MOUSE_FLAGS) {
aprint_verbose("\n%s: Z report 0x%04x not supported\n",
USBDEVNAME(sc->sc_hdev.sc_dev), flags);
- sc->sc_loc_z.size = 0; /* Bad Z coord, ignore it */
+ zloc->size = 0; /* Bad Z coord, ignore it */
} else {
- sc->flags |= UMS_Z;
+ if (sc->flags & UMS_Z)
+ sc->flags |= UMS_W;
+ else
+ sc->flags |= UMS_Z;
}
}
+ /*
+ * The Microsoft Wireless Laser Mouse 6000 v2.0 reports a bad
+ * position for the wheel and wheel tilt controls -- should be
+ * in bytes 3 & 4 of the report. Fix this if necessary.
+ */
+ if (uha->uaa->vendor == USB_VENDOR_MICROSOFT &&
+ uha->uaa->product == USB_PRODUCT_MICROSOFT_24GHZ_XCVR) {
+ if ((sc->flags & UMS_Z) && sc->sc_loc_z.pos == 0)
+ sc->sc_loc_z.pos = 24;
+ if ((sc->flags & UMS_W) && sc->sc_loc_w.pos == 0)
+ sc->sc_loc_w.pos = sc->sc_loc_z.pos + 8;
+ }
/* figure out the number of buttons */
for (i = 1; i <= MAX_BUTTONS; i++)
@@ -245,9 +279,11 @@
break;
sc->nbuttons = i - 1;
- aprint_normal(": %d button%s%s\n",
+ aprint_normal(": %d button%s%s%s%s\n",
sc->nbuttons, sc->nbuttons == 1 ? "" : "s",
- sc->flags & UMS_Z ? " and Z dir." : "");
+ sc->flags & UMS_W ? ", W" : "",
+ sc->flags & UMS_Z ? " and Z dir" : "",
+ sc->flags & UMS_W ? "s" : "");
for (i = 1; i <= sc->nbuttons; i++)
hid_locate(desc, size, HID_USAGE2(HUP_BUTTON, i),
@@ -263,6 +299,9 @@
if (sc->flags & UMS_Z)
DPRINTF(("ums_attach: Z\t%d/%d\n",
sc->sc_loc_z.pos, sc->sc_loc_z.size));
+ if (sc->flags & UMS_W)
+ DPRINTF(("ums_attach: W\t%d/%d\n",
+ sc->sc_loc_w.pos, sc->sc_loc_w.size));
for (i = 1; i <= sc->nbuttons; i++) {
DPRINTF(("ums_attach: B%d\t%d/%d\n",
i, sc->sc_loc_btn[i-1].pos,sc->sc_loc_btn[i-1].size));
Home |
Main Index |
Thread Index |
Old Index