Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/external/bsd/tcpdump/dist resolve conflicts.
details: https://anonhg.NetBSD.org/src/rev/c70e9b5f7fa0
branches: trunk
changeset: 792346:c70e9b5f7fa0
user: christos <christos%NetBSD.org@localhost>
date: Tue Dec 31 17:33:30 2013 +0000
description:
resolve conflicts.
diffstat:
external/bsd/tcpdump/dist/README | 233 -
external/bsd/tcpdump/dist/acconfig.h | 75 -
external/bsd/tcpdump/dist/addrtoname.c | 19 +-
external/bsd/tcpdump/dist/checksum.c | 4 +-
external/bsd/tcpdump/dist/configure | 12768 ++++++++--------------
external/bsd/tcpdump/dist/configure.in | 179 +-
external/bsd/tcpdump/dist/cpack.c | 11 +
external/bsd/tcpdump/dist/cpack.h | 2 +
external/bsd/tcpdump/dist/extract.h | 53 +-
external/bsd/tcpdump/dist/forces.h | 679 -
external/bsd/tcpdump/dist/icmp6.h | 11 +-
external/bsd/tcpdump/dist/ieee802_11_radio.h | 6 +
external/bsd/tcpdump/dist/interface.h | 43 +-
external/bsd/tcpdump/dist/machdep.c | 7 +-
external/bsd/tcpdump/dist/nlpid.c | 3 +-
external/bsd/tcpdump/dist/parsenfsfh.c | 31 +-
external/bsd/tcpdump/dist/print-802_11.c | 62 +-
external/bsd/tcpdump/dist/print-arcnet.c | 4 +-
external/bsd/tcpdump/dist/print-arp.c | 6 +-
external/bsd/tcpdump/dist/print-atalk.c | 8 +-
external/bsd/tcpdump/dist/print-atm.c | 18 +-
external/bsd/tcpdump/dist/print-bgp.c | 46 +-
external/bsd/tcpdump/dist/print-bootp.c | 16 +-
external/bsd/tcpdump/dist/print-cdp.c | 6 +-
external/bsd/tcpdump/dist/print-cfm.c | 4 +-
external/bsd/tcpdump/dist/print-chdlc.c | 4 +-
external/bsd/tcpdump/dist/print-decnet.c | 4 +-
external/bsd/tcpdump/dist/print-dhcp6.c | 131 +-
external/bsd/tcpdump/dist/print-domain.c | 8 +-
external/bsd/tcpdump/dist/print-esp.c | 20 +-
external/bsd/tcpdump/dist/print-ether.c | 19 +-
external/bsd/tcpdump/dist/print-forces.c | 1 -
external/bsd/tcpdump/dist/print-fr.c | 18 +-
external/bsd/tcpdump/dist/print-gre.c | 4 +-
external/bsd/tcpdump/dist/print-hsrp.c | 4 +-
external/bsd/tcpdump/dist/print-icmp.c | 8 +-
external/bsd/tcpdump/dist/print-icmp6.c | 42 +-
external/bsd/tcpdump/dist/print-igmp.c | 4 +-
external/bsd/tcpdump/dist/print-igrp.c | 4 +-
external/bsd/tcpdump/dist/print-ip.c | 6 +-
external/bsd/tcpdump/dist/print-isakmp.c | 9 +-
external/bsd/tcpdump/dist/print-isoclns.c | 414 +-
external/bsd/tcpdump/dist/print-juniper.c | 16 +-
external/bsd/tcpdump/dist/print-krb.c | 6 +-
external/bsd/tcpdump/dist/print-l2tp.c | 10 +-
external/bsd/tcpdump/dist/print-llc.c | 8 +-
external/bsd/tcpdump/dist/print-lldp.c | 208 +-
external/bsd/tcpdump/dist/print-lmp.c | 18 +-
external/bsd/tcpdump/dist/print-lwres.c | 8 +-
external/bsd/tcpdump/dist/print-nfs.c | 69 +-
external/bsd/tcpdump/dist/print-ntp.c | 10 +-
external/bsd/tcpdump/dist/print-ospf.c | 40 +-
external/bsd/tcpdump/dist/print-ospf6.c | 16 +-
external/bsd/tcpdump/dist/print-pflog.c | 8 +-
external/bsd/tcpdump/dist/print-pgm.c | 14 +-
external/bsd/tcpdump/dist/print-pim.c | 8 +-
external/bsd/tcpdump/dist/print-ppp.c | 28 +-
external/bsd/tcpdump/dist/print-pppoe.c | 8 +-
external/bsd/tcpdump/dist/print-radius.c | 2 +-
external/bsd/tcpdump/dist/print-rip.c | 69 +-
external/bsd/tcpdump/dist/print-rsvp.c | 12 +-
external/bsd/tcpdump/dist/print-rx.c | 30 +-
external/bsd/tcpdump/dist/print-sctp.c | 11 +-
external/bsd/tcpdump/dist/print-sflow.c | 4 +-
external/bsd/tcpdump/dist/print-sll.c | 4 +-
external/bsd/tcpdump/dist/print-stp.c | 173 +-
external/bsd/tcpdump/dist/print-sunrpc.c | 4 +-
external/bsd/tcpdump/dist/print-syslog.c | 46 +-
external/bsd/tcpdump/dist/print-tcp.c | 311 +-
external/bsd/tcpdump/dist/print-tftp.c | 6 +-
external/bsd/tcpdump/dist/print-udp.c | 30 +-
external/bsd/tcpdump/dist/print-zephyr.c | 4 +-
external/bsd/tcpdump/dist/setsignal.c | 4 +-
external/bsd/tcpdump/dist/signature.c | 4 +-
external/bsd/tcpdump/dist/tcp.h | 8 +-
external/bsd/tcpdump/dist/tcpdump.1.in | 98 +-
external/bsd/tcpdump/dist/tcpdump.c | 394 +-
external/bsd/tcpdump/dist/tests/empty.uu | 3 -
external/bsd/tcpdump/dist/tests/lmp.new | 36 -
external/bsd/tcpdump/dist/tests/lmp.sh | 12 -
external/bsd/tcpdump/dist/tests/print-flags.sh | 29 -
external/bsd/tcpdump/dist/udp.h | 4 +
82 files changed, 6631 insertions(+), 10136 deletions(-)
diffs (truncated from 23701 to 300 lines):
diff -r ee573f1cdd12 -r c70e9b5f7fa0 external/bsd/tcpdump/dist/README
--- a/external/bsd/tcpdump/dist/README Tue Dec 31 17:33:11 2013 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,233 +0,0 @@
-@(#) Header: /tcpdump/master/tcpdump/README,v 1.68 2008-12-15 00:05:27 guy Exp (LBL)
-
-TCPDUMP 4.x.y
-Now maintained by "The Tcpdump Group"
-See www.tcpdump.org
-
-Please send inquiries/comments/reports to:
- tcpdump-workers%lists.tcpdump.org@localhost
-
-Anonymous Git is available via:
- git clone git://bpf.tcpdump.org/tcpdump
-
-Version 4.x.y of TCPDUMP can be retrieved with the CVS tag "tcpdump_4_xrely":
- cvs -d :pserver:cvs.tcpdump.org:/tcpdump/master checkout -r tcpdump_4_xrely tcpdump
-
-Please submit patches against the master copy to the tcpdump project on
-sourceforge.net.
-
-formerly from Lawrence Berkeley National Laboratory
- Network Research Group <tcpdump%ee.lbl.gov@localhost>
- ftp://ftp.ee.lbl.gov/tcpdump.tar.Z (3.4)
-
-This directory contains source code for tcpdump, a tool for network
-monitoring and data acquisition. This software was originally
-developed by the Network Research Group at the Lawrence Berkeley
-National Laboratory. The original distribution is available via
-anonymous ftp to ftp.ee.lbl.gov, in tcpdump.tar.Z. More recent
-development is performed at tcpdump.org, http://www.tcpdump.org/
-
-Tcpdump uses libpcap, a system-independent interface for user-level
-packet capture. Before building tcpdump, you must first retrieve and
-build libpcap, also originally from LBL and now being maintained by
-tcpdump.org; see http://www.tcpdump.org/ .
-
-Once libpcap is built (either install it or make sure it's in
-../libpcap), you can build tcpdump using the procedure in the INSTALL
-file.
-
-The program is loosely based on SMI's "etherfind" although none of the
-etherfind code remains. It was originally written by Van Jacobson as
-part of an ongoing research project to investigate and improve tcp and
-internet gateway performance. The parts of the program originally
-taken from Sun's etherfind were later re-written by Steven McCanne of
-LBL. To insure that there would be no vestige of proprietary code in
-tcpdump, Steve wrote these pieces from the specification given by the
-manual entry, with no access to the source of tcpdump or etherfind.
-
-Over the past few years, tcpdump has been steadily improved by the
-excellent contributions from the Internet community (just browse
-through the CHANGES file). We are grateful for all the input.
-
-Richard Stevens gives an excellent treatment of the Internet protocols
-in his book ``TCP/IP Illustrated, Volume 1''. If you want to learn more
-about tcpdump and how to interpret its output, pick up this book.
-
-Some tools for viewing and analyzing tcpdump trace files are available
-from the Internet Traffic Archive:
-
- http://www.acm.org/sigcomm/ITA/
-
-Another tool that tcpdump users might find useful is tcpslice:
-
- ftp://ftp.ee.lbl.gov/tcpslice.tar.Z
-
-It is a program that can be used to extract portions of tcpdump binary
-trace files. See the above distribution for further details and
-documentation.
-
-Problems, bugs, questions, desirable enhancements, etc. should be sent
-to the address "tcpdump-workers%lists.tcpdump.org@localhost". Bugs, support
-requests, and feature requests may also be submitted on the SourceForge
-site for tcpdump at
-
- http://sourceforge.net/projects/tcpdump/
-
-Source code contributions, etc. should be sent to the email address
-submitted as patches on the SourceForge site for tcpdump.
-
-Current versions can be found at www.tcpdump.org, or the SourceForge
-site for tcpdump.
-
- - The TCPdump team
-
-original text by: Steve McCanne, Craig Leres, Van Jacobson
-
--------------------------------------
-This directory also contains some short awk programs intended as
-examples of ways to reduce tcpdump data when you're tracking
-particular network problems:
-
-send-ack.awk
- Simplifies the tcpdump trace for an ftp (or other unidirectional
- tcp transfer). Since we assume that one host only sends and
- the other only acks, all address information is left off and
- we just note if the packet is a "send" or an "ack".
-
- There is one output line per line of the original trace.
- Field 1 is the packet time in decimal seconds, relative
- to the start of the conversation. Field 2 is delta-time
- from last packet. Field 3 is packet type/direction.
- "Send" means data going from sender to receiver, "ack"
- means an ack going from the receiver to the sender. A
- preceding "*" indicates that the data is a retransmission.
- A preceding "-" indicates a hole in the sequence space
- (i.e., missing packet(s)), a "#" means an odd-size (not max
- seg size) packet. Field 4 has the packet flags
- (same format as raw trace). Field 5 is the sequence
- number (start seq. num for sender, next expected seq number
- for acks). The number in parens following an ack is
- the delta-time from the first send of the packet to the
- ack. A number in parens following a send is the
- delta-time from the first send of the packet to the
- current send (on duplicate packets only). Duplicate
- sends or acks have a number in square brackets showing
- the number of duplicates so far.
-
- Here is a short sample from near the start of an ftp:
- 3.00 0.20 send . 512
- 3.20 0.20 ack . 1024 (0.20)
- 3.20 0.00 send P 1024
- 3.40 0.20 ack . 1536 (0.20)
- 3.80 0.40 * send . 0 (3.80) [2]
- 3.82 0.02 * ack . 1536 (0.62) [2]
- Three seconds into the conversation, bytes 512 through 1023
- were sent. 200ms later they were acked. Shortly thereafter
- bytes 1024-1535 were sent and again acked after 200ms.
- Then, for no apparent reason, 0-511 is retransmitted, 3.8
- seconds after its initial send (the round trip time for this
- ftp was 1sec, +-500ms). Since the receiver is expecting
- 1536, 1536 is re-acked when 0 arrives.
-
-packetdat.awk
- Computes chunk summary data for an ftp (or similar
- unidirectional tcp transfer). [A "chunk" refers to
- a chunk of the sequence space -- essentially the packet
- sequence number divided by the max segment size.]
-
- A summary line is printed showing the number of chunks,
- the number of packets it took to send that many chunks
- (if there are no lost or duplicated packets, the number
- of packets should equal the number of chunks) and the
- number of acks.
-
- Following the summary line is one line of information
- per chunk. The line contains eight fields:
- 1 - the chunk number
- 2 - the start sequence number for this chunk
- 3 - time of first send
- 4 - time of last send
- 5 - time of first ack
- 6 - time of last ack
- 7 - number of times chunk was sent
- 8 - number of times chunk was acked
- (all times are in decimal seconds, relative to the start
- of the conversation.)
-
- As an example, here is the first part of the output for
- an ftp trace:
-
- # 134 chunks. 536 packets sent. 508 acks.
- 1 1 0.00 5.80 0.20 0.20 4 1
- 2 513 0.28 6.20 0.40 0.40 4 1
- 3 1025 1.16 6.32 1.20 1.20 4 1
- 4 1561 1.86 15.00 2.00 2.00 6 1
- 5 2049 2.16 15.44 2.20 2.20 5 1
- 6 2585 2.64 16.44 2.80 2.80 5 1
- 7 3073 3.00 16.66 3.20 3.20 4 1
- 8 3609 3.20 17.24 3.40 5.82 4 11
- 9 4097 6.02 6.58 6.20 6.80 2 5
-
- This says that 134 chunks were transferred (about 70K
- since the average packet size was 512 bytes). It took
- 536 packets to transfer the data (i.e., on the average
- each chunk was transmitted four times). Looking at,
- say, chunk 4, we see it represents the 512 bytes of
- sequence space from 1561 to 2048. It was first sent
- 1.86 seconds into the conversation. It was last
- sent 15 seconds into the conversation and was sent
- a total of 6 times (i.e., it was retransmitted every
- 2 seconds on the average). It was acked once, 140ms
- after it first arrived.
-
-stime.awk
-atime.awk
- Output one line per send or ack, respectively, in the form
- <time> <seq. number>
- where <time> is the time in seconds since the start of the
- transfer and <seq. number> is the sequence number being sent
- or acked. I typically plot this data looking for suspicious
- patterns.
-
-
-The problem I was looking at was the bulk-data-transfer
-throughput of medium delay network paths (1-6 sec. round trip
-time) under typical DARPA Internet conditions. The trace of the
-ftp transfer of a large file was used as the raw data source.
-The method was:
-
- - On a local host (but not the Sun running tcpdump), connect to
- the remote ftp.
-
- - On the monitor Sun, start the trace going. E.g.,
- tcpdump host local-host and remote-host and port ftp-data >tracefile
-
- - On local, do either a get or put of a large file (~500KB),
- preferably to the null device (to minimize effects like
- closing the receive window while waiting for a disk write).
-
- - When transfer is finished, stop tcpdump. Use awk to make up
- two files of summary data (maxsize is the maximum packet size,
- tracedata is the file of tcpdump tracedata):
- awk -f send-ack.awk packetsize=avgsize tracedata >sa
- awk -f packetdat.awk packetsize=avgsize tracedata >pd
-
- - While the summary data files are printing, take a look at
- how the transfer behaved:
- awk -f stime.awk tracedata | xgraph
- (90% of what you learn seems to happen in this step).
-
- - Do all of the above steps several times, both directions,
- at different times of day, with different protocol
- implementations on the other end.
-
- - Using one of the Unix data analysis packages (in my case,
- S and Gary Perlman's Unix|Stat), spend a few months staring
- at the data.
-
- - Change something in the local protocol implementation and
- redo the steps above.
-
- - Once a week, tell your funding agent that you're discovering
- wonderful things and you'll write up that research report
- "real soon now".
diff -r ee573f1cdd12 -r c70e9b5f7fa0 external/bsd/tcpdump/dist/acconfig.h
--- a/external/bsd/tcpdump/dist/acconfig.h Tue Dec 31 17:33:11 2013 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,75 +0,0 @@
-/* "generated automatically" means DO NOT MAKE CHANGES TO config.h.in --
- * make them to acconfig.h and rerun autoheader */
-@TOP@
-
-/* Define if you enable IPv6 support */
-#undef INET6
-
-/* Define if you enable support for the libsmi. */
-#undef LIBSMI
-
-/* define if you have the addrinfo function. */
-#undef HAVE_ADDRINFO
-
-/* define if you need to include missing/addrinfoh.h. */
-#undef NEED_ADDRINFO_H
-
-/* define ifyou have the h_errno variable. */
-#undef HAVE_H_ERRNO
-
-/* define if you have struct sockaddr_storage */
-#undef HAVE_SOCKADDR_STORAGE
-
-/* define if you have both getipnodebyname() and getipnodebyaddr() */
-#undef USE_GETIPNODEBY
-
-/* define if you have ether_ntohost() and it works */
-#undef USE_ETHER_NTOHOST
-
-/* define if libpcap has pcap_version */
-#undef HAVE_PCAP_VERSION
-
-/* define if libpcap has pcap_debug */
-#undef HAVE_PCAP_DEBUG
-
-/* define if libpcap has yydebug */
-#undef HAVE_YYDEBUG
-
-/* define if libpcap has pcap_list_datalinks() */
-#undef HAVE_PCAP_LIST_DATALINKS
-
-/* define if libpcap has pcap_set_datalink() */
-#undef HAVE_PCAP_SET_DATALINK
-
-/* define if libpcap has pcap_datalink_name_to_val() */
-#undef HAVE_PCAP_DATALINK_NAME_TO_VAL
-
-/* define if libpcap has pcap_datalink_val_to_description() */
-#undef HAVE_PCAP_DATALINK_VAL_TO_DESCRIPTION
-
-/* define if libpcap has pcap_dump_ftell() */
-#undef HAVE_PCAP_DUMP_FTELL
-
-/* define if you have getrpcbynumber() */
-#undef HAVE_GETRPCBYNUMBER
-
-/* Workaround for missing 64-bit formats */
-#undef PRId64
-#undef PRIo64
-#undef PRIx64
Home |
Main Index |
Thread Index |
Old Index