Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/sandpoint/conf Enabled SYSV* options, which all por...
details: https://anonhg.NetBSD.org/src/rev/730139fc073f
branches: trunk
changeset: 794090:730139fc073f
user: phx <phx%NetBSD.org@localhost>
date: Wed Mar 05 14:13:20 2014 +0000
description:
Enabled SYSV* options, which all ports have (and which is needed by 3rd
party software like SANE, e.g.).
Added ugen*.
diffstat:
sys/arch/sandpoint/conf/GENERIC | 49 ++++++++++++++++++++++++++++++----------
1 files changed, 36 insertions(+), 13 deletions(-)
diffs (90 lines):
diff -r 5ff92bc3d986 -r 730139fc073f sys/arch/sandpoint/conf/GENERIC
--- a/sys/arch/sandpoint/conf/GENERIC Wed Mar 05 09:37:29 2014 +0000
+++ b/sys/arch/sandpoint/conf/GENERIC Wed Mar 05 14:13:20 2014 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: GENERIC,v 1.80 2013/06/30 21:38:58 rmind Exp $
+# $NetBSD: GENERIC,v 1.81 2014/03/05 14:13:20 phx Exp $
#
# machine description file for GENERIC NAS
#
@@ -22,7 +22,7 @@
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
-#ident "GENERIC-$Revision: 1.80 $"
+#ident "GENERIC-$Revision: 1.81 $"
maxusers 32
@@ -34,9 +34,9 @@
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
options KTRACE
-#options SYSVMSG # System V message queues
-#options SYSVSEM # System V semaphores
-#options SYSVSHM # System V shared memory
+options SYSVMSG # System V message queues
+options SYSVSEM # System V semaphores
+options SYSVSHM # System V shared memory
#options MODULAR # module(7) support
#options USERCONF # userconf(4) support
@@ -205,7 +205,26 @@
atabus* at ata?
# IDE drives
-wd* at atabus? drive ? flags 0x0000 # the drives themselves
+# Flags are used only with controllers that support DMA operations
+# and mode settings (e.g. some pciide controllers)
+# The lowest order four bits (rightmost digit) of the flags define the PIO
+# mode to use, the next set of four bits the DMA mode and the third set the
+# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
+# to use, and the last bit must be 1 for this setting to be used.
+# For DMA and UDMA, 0xf (1111) means 'disable'.
+# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
+# (0xc=1100, 0xa=1010, 0xf=1111)
+# 0x0000 means "use whatever the drive claims to support".
+wd* at atabus? drive ? flags 0x0000
+
+# ATAPI bus support
+atapibus* at atapi?
+
+# ATAPI devices
+# flags have the same meaning as for IDE drives.
+cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
+sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
+uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
# PCI network interfaces
ral* at pci? dev ? function ? # Ralink Technology RT25x0 802.11a/b/g
@@ -247,19 +266,23 @@
video* at videobus?
# USB printer
-ulpt* at uhub? port ? configuration ? interface ? # USB Printer
+ulpt* at uhub? port ? configuration ? interface ?
# USB Mass Storage
umass* at uhub? port ? configuration ? interface ?
wd* at umass?
-scsibus* at umass?
-sd* at scsibus? target ? lun ? # SCSI disk drives
-cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
+# USB scanners
+#uscanner* at uhub? port ?
+ugen* at uhub? port ? configuration ? interface ? # USB Generic driver
-atapibus* at atapi?
-sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
-cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
+# SCSI bus support
+scsibus* at umass?
+
+# SCSI devices
+sd* at scsibus? target ? lun ? # SCSI disk drives
+cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
+
#
# Pseudo-Devices
Home |
Main Index |
Thread Index |
Old Index