[src/netbsd-7]: src/doc Ticket #1628

[martin <martin%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/51cb9853fb42
branches:  netbsd-7
changeset: 800521:51cb9853fb42
user:      martin <martin%NetBSD.org@localhost>
date:      Sat Aug 11 13:36:49 2018 +0000

description:
Ticket #1628

diffstat:

 doc/CHANGES-7.2 |  114 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 113 insertions(+), 1 deletions(-)

diffs (125 lines):

diff -r 04646f887f2c -r 51cb9853fb42 doc/CHANGES-7.2
--- a/doc/CHANGES-7.2   Sat Aug 11 13:34:20 2018 +0000
+++ b/doc/CHANGES-7.2   Sat Aug 11 13:36:49 2018 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: CHANGES-7.2,v 1.1.2.102 2018/08/09 14:39:22 martin Exp $
+# $NetBSD: CHANGES-7.2,v 1.1.2.103 2018/08/11 13:36:49 martin Exp $
 
 A complete list of changes from the NetBSD 7.1 release to the NetBSD 7.2
 release:
@@ -5844,3 +5844,115 @@
        to the last column.
        [simonb, ticket #1627]
 
+share/man/man4/wm.4                            1.40 via patch
+sys/dev/mii/ihphyreg.h                         1.2
+sys/dev/mii/inbmphyreg.h                       1.10
+sys/dev/pci/if_wm.c                            1.504, 1.506, 1.510-1.535, 1.539-1.540, 1.546, 1.548, 1.551-1.552, 1.558, 1.565-1.573, 1.575, 1.579, 1.582, 1.584 via patch
+sys/dev/pci/if_wmreg.h                         1.99-1.103, 1.106-1.107 via patch
+sys/dev/pci/if_wmvar.h                         1.34-1.39 via patch
+sys/dev/pci/pcidevs                            1.1327 via patch
+sys/dev/pci/pcidevs.h                          regen
+sys/dev/pci/pcidevs_data.h                     regen
+sys/dev/pci/pcireg.h                           patch
+
+       Sync wm(4) up to 2018/08/08 except MSI/MSI-X and NET_MPSAFE:
+       - remove extra "+"
+       - Fix a bug that non-GMII devices don't send a routing message when
+         the link status is changed.
+       - Set WMREG_KABGTXD not in wm_init_locked() but in wm_reset(). Same as
+         other OSes.
+       - If a interrupt is a spurious interrupt, don't print debug message.
+       - Don't print the Image Unique ID if an NVM is iNVM (i210 and I211).
+       - Print sc_flags with snprintb().
+       - Fix a bug that a RAL was written at incorrect address when the index
+         number is more than 16 on 82544 and newer.
+       - The layout of RAL on PCH* are different from others. Fix it.
+       - Flush every MTA write. Same as Linux.
+       - Move the location of calling wm_set_filter. Same as some other OSes.
+       - Add CSR_WRITE_FLUSH() after writing WMREG_CTRL in
+         wm_gmii_mediachange().
+       - Add missing "else" in wm_nvm_release().
+       - Make new wm_phy_post_reset() and use this function at all location
+         after resetting phy.
+       - Move the location of calling wm_get_hw_control. Same as Linux.
+       - Add I219 specific wokaround for legacy interrupt. From OpenBSD.
+       - Move the location of calling wm_lplu_d0_disable().
+       - Fix latency calculation in wm_platform_pm_pch_lpt().
+       - Set OBFF water mark and enable OBFF on PCH_LPT and newer.
+       - Disable D0 LPLU on 8257[12356], 82580, I350 and I21[01], too. Before
+         this commit, above devices and non-PCIe devices accessed wrong
+         register.
+       - Use device_printf() instead of aprint_error_dev() for PHY read/write
+         functions because those are used not only in device attach.
+       - Fix a bug that wm_gmii_i82544_{read,write}reg() didn't take care of
+         page select. PHY access from igphy() automatically did it, but
+         accessing from wm(4) for wrokaround didn't work correctly. This
+         change affects 8254[17], 8257[12] ICH8, ICH9 and ICH10.
+       - Call wm_kmrn_lock_loss_workaround_ich8lan() before any PHY access in
+         wm_linkintr_gmii().
+       - Register access in wm_kmrn_lock_loss_workaround_ich8lan() now works
+         correctly. Enable this function.
+       - Configure the LCD with the extended configuration region in NVM if
+         it's required.
+       - If TX is not required to flush, RX is also not required to flush
+         in wm_flush_desc_rings(). Same as other OSes.
+       - Remove wrong semaphore access in wm_nvm_{read,write}_{ich8,spt} to
+         prevent hangup. A semaphore is get/put in wm_nvm_{read,write}.
+       - Move some initialization stuff in wm_attach() before wm_reset(). Some
+         flags and callback function are required to set correctly before
+         wm_reset() because wm_reset() and some helper functions refer them.
+       - Add wm_write_smbus_addr() to set SMBus address by software.
+       - Modify wm_gmii_hv_{read,write}reg_locked() to make them access
+         HV_SMB_ADDR correctly.
+       - Use new nvm.{acquire,release}() for semaphore.
+       - Our MII readreg/writereg API has not way to detect an error.
+         kmrn_{read,write}reg() are not used for MII API, so it's not required
+         for these functions to use the same API. So,
+         - Change return value as error code.
+         - Change register value from int to uint16_t.
+         - read: pass pointer for uint16_t as an argument.
+         - Check return value on caller side.
+       - Check whether it's required to use MDIC workaround for 80003 or not
+         in wm_reset(). If the workaround isn't required, don't use the
+         workaround code in wm_gmii_i80003_{read,write}reg.
+       - Add WM_F_WA_I210_CLSEM flag for a workaround. FreeBSD/Linux drivers
+         say "In rare circumstances, the SW semaphore may already be held
+         unintentionally on I21[01]". PXE boot is one of the case.
+       - Qemu's e1000e emulation (82574L)'s SPI has only 64 words. I've never
+         seen on real 82574 hardware with such small SPI ROM. Check
+         sc->sc_nvm_wordsize before accessing higher address words to prevent
+         timeout.
+       - Check some wm_nvm_read()'s return vale.
+       - Print NVM offset and word count when EERD polling failed.
+       - On I219, drop TARC0 bit 28 for DMA hang workaround (from Linux).
+       - 82583 supports jumbo frame. Fixes PR#52773 reported by
+         Shinichi Doyashiki.
+       - Fix typo in comment. Reported by Shinichi Doyashiki in PR#52885.
+       - Add ASPM workaround for 8257[1234] and 82583 to prevent device
+         timeout or hangup. Fixes PR#52818 reported by Shinichi Doyashiki.
+       - CID-1427779: Fix uninitialized variables.
+       - Fix a bug that wm_pll_workaround_i210() is not called when
+         a) Chip is I211 or b) Chip is I210 and it uses iNVM (not FLASH).
+       - Do wm_reset_mdicnfg_82580() on 82580 only.
+       - Fix FLASH access on PCH_SPT and newer. Their FLASH access should be
+         done by 32bit. Especially for ICH_FLASH_HSFCTL register, it's located
+         at 0x0006, so it must be accessed via ICH_FLASH_HSFSTS(0x0004) and
+         use shift or mask.
+       - Make wm_nvm_valid_bank_detect_ich8lan() the same as other OSes.
+       - If the extended configuration size in the EXTCNFSIZE register is 0,
+         don't continue in wm_init_lcd_from_nvm().
+       - Add PCH_CNP support (I219 with Intel 300 series chipset).
+       - Enable I219 support.
+       - I354 uses an external PHY, so don't use wm_set_eee_i350().
+       - Fix a bug that the link can't detect in link interrupt function for
+         non-SERDES fiber.
+       - Fix a bug that 82542 misunderstand fiber's signal detection.
+       - Add debug printf()s.
+       - Update comment.
+       - Rename functions and variables.
+       - Add diagnostic code.
+       - Sort registers.
+       - Lowercase hexadecimal values.
+       - KNF.
+       [msaitoh, #1628]
+