Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/arm/omap Add OMAP3530 temperature sensor support
details: https://anonhg.NetBSD.org/src/rev/ac1fa08fb009
branches: trunk
changeset: 783620:ac1fa08fb009
user: jmcneill <jmcneill%NetBSD.org@localhost>
date: Tue Jan 01 13:05:21 2013 +0000
description:
Add OMAP3530 temperature sensor support
diffstat:
sys/arch/arm/omap/files.omap2 | 7 +-
sys/arch/arm/omap/omap3_scm.c | 227 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 233 insertions(+), 1 deletions(-)
diffs (252 lines):
diff -r 507a950b1d9c -r ac1fa08fb009 sys/arch/arm/omap/files.omap2
--- a/sys/arch/arm/omap/files.omap2 Tue Jan 01 12:45:06 2013 +0000
+++ b/sys/arch/arm/omap/files.omap2 Tue Jan 01 13:05:21 2013 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: files.omap2,v 1.19 2012/12/31 12:45:49 jmcneill Exp $
+# $NetBSD: files.omap2,v 1.20 2013/01/01 13:05:21 jmcneill Exp $
#
# Configuration info for Texas Instruments OMAP2/OMAP3 CPU support
# Based on xscale/files.pxa2x0
@@ -53,6 +53,11 @@
attach omapiic at obio with omap3_i2c
file arch/arm/omap/omap3_i2c.c omap3_i2c
+# OMAP3 system control module
+device omapscm: sysmon_envsys
+attach omapscm at obio with omap3_scm
+file arch/arm/omap/omap3_scm.c omap3_scm
+
# OMAP dual-mode timer
device omapdmtimer
file arch/arm/omap/omap_dmtimer.c omapdmtimer
diff -r 507a950b1d9c -r ac1fa08fb009 sys/arch/arm/omap/omap3_scm.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/arch/arm/omap/omap3_scm.c Tue Jan 01 13:05:21 2013 +0000
@@ -0,0 +1,227 @@
+/* $NetBSD: omap3_scm.c,v 1.1 2013/01/01 13:05:21 jmcneill Exp $ */
+
+/*-
+ * Copyright (c) 2013 Jared D. McNeill <jmcneill%invisible.ca@localhost>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__KERNEL_RCSID(0, "$NetBSD: omap3_scm.c,v 1.1 2013/01/01 13:05:21 jmcneill Exp $");
+
+#include "opt_omap.h"
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/device.h>
+#include <sys/conf.h>
+#include <sys/bus.h>
+#include <sys/proc.h>
+#include <sys/kernel.h>
+#include <sys/mutex.h>
+
+#include <arm/omap/omap2_obiovar.h>
+
+#include <arm/omap/omap2_reg.h>
+
+#include <dev/sysmon/sysmonvar.h>
+
+#define SCM_BASE_3530 0x48002000
+#define SCM_SIZE_3530 0x1000
+#define SCM_OFFSET_INTERFACE_3530 0
+#define SCM_OFFSET_GENERAL_3530 0x270
+
+#if defined(OMAP_3530)
+#define SCM_BASE SCM_BASE_3530
+#define SCM_SIZE SCM_SIZE_3530
+#define SCM_OFFSET_INTERFACE SCM_OFFSET_INTERFACE_3530
+#define SCM_OFFSET_GENERAL SCM_OFFSET_GENERAL_3530
+#endif
+
+/* INTERFACE */
+#define CONTROL_REVISION (SCM_OFFSET_INTERFACE + 0x00)
+
+/* GENERAL */
+#define CONTROL_TEMP_SENSOR (SCM_OFFSET_GENERAL + 0x2b4)
+#define CONTROL_TEMP_SENSOR_CONTCONV __BIT(9)
+#define CONTROL_TEMP_SENSOR_SOC __BIT(8)
+#define CONTROL_TEMP_SENSOR_EOCZ __BIT(7)
+#define CONTROL_TEMP_SENSOR_TEMP_MASK __BITS(6,0)
+
+/* CONTROL_TEMP_SENSOR TEMP bits to tenths of a degree */
+static const int omap3_scm_adc2temp[128] = {
+ -400, -400, -400, -400, -400,
+ -389, -375, -361, -333, -318,
+ -304, -290, -275, -261, -247,
+ -233, -219, -205, -191, -177,
+ -163, -149, -134, -120, -106,
+ -92, -78, -64, -50, -35,
+ -21, -7, 8, 23, 37,
+ 51, 66, 80, 94, 108,
+ 123, 137, 151, 165, 179,
+ 194, 208, 222, 236, 251,
+ 265, 279, 293, 307, 321,
+ 335, 349, 364, 378, 392,
+ 306, 420, 434, 449, 463,
+ 477, 491, 505, 519, 533,
+ 546, 560, 574, 588, 602,
+ 616, 630, 644, 657, 671,
+ 685, 699, 713, 727, 741,
+ 755, 769, 783, 797, 811,
+ 823, 838, 852, 865, 879,
+ 893, 906, 920, 934, 947,
+ 961, 975, 989, 1002, 1016,
+ 1030, 1043, 1057, 1071, 1085,
+ 1098, 1112, 1126, 1140, 1153,
+ 1167, 1181, 1194, 1208, 1222,
+ 1235, 1249, 1250, 1250, 1250,
+ 1250, 1250, 1250
+};
+
+struct omap3_scm_softc {
+ device_t sc_dev;
+
+ bus_space_tag_t sc_iot;
+ bus_space_handle_t sc_ioh;
+
+ /* GENERAL */
+ struct sysmon_envsys *sc_sme;
+ envsys_data_t sc_sensor;
+};
+
+#define SCM_READ_REG(sc, reg) \
+ bus_space_read_4((sc)->sc_iot, (sc)->sc_ioh, (reg))
+#define SCM_WRITE_REG(sc, reg, val) \
+ bus_space_write_4((sc)->sc_iot, (sc)->sc_ioh, (reg), (val))
+
+static int omap3_scm_match(device_t, cfdata_t, void *);
+static void omap3_scm_attach(device_t, device_t, void *);
+
+static void omap3_scm_sensor_attach(struct omap3_scm_softc *);
+static void omap3_scm_sensor_refresh(struct sysmon_envsys *,
+ envsys_data_t *);
+
+CFATTACH_DECL2_NEW(omap3_scm, sizeof(struct omap3_scm_softc),
+ omap3_scm_match, omap3_scm_attach, NULL, NULL, NULL, NULL);
+
+static int
+omap3_scm_match(device_t parent, cfdata_t match, void *opaque)
+{
+ struct obio_attach_args *obio = opaque;
+
+ if (obio->obio_addr == SCM_BASE)
+ return 1;
+
+ return 0;
+}
+
+static void
+omap3_scm_attach(device_t parent, device_t self, void *opaque)
+{
+ struct omap3_scm_softc *sc = device_private(self);
+ struct obio_attach_args *obio = opaque;
+ uint32_t rev;
+
+ aprint_naive("\n");
+
+ KASSERT(obio->obio_size == SCM_SIZE);
+
+ sc->sc_dev = self;
+ sc->sc_iot = obio->obio_iot;
+
+ if (bus_space_map(obio->obio_iot, obio->obio_addr, obio->obio_size,
+ 0, &sc->sc_ioh) != 0) {
+ aprint_error(": couldn't map address space\n");
+ return;
+ }
+
+ rev = SCM_READ_REG(sc, CONTROL_REVISION);
+ aprint_normal(": rev. 0x%x\n", rev & 0xff);
+
+ omap3_scm_sensor_attach(sc);
+}
+
+static void
+omap3_scm_sensor_attach(struct omap3_scm_softc *sc)
+{
+ uint32_t ctrl;
+
+ /* Enable single conversion mode */
+ ctrl = SCM_READ_REG(sc, CONTROL_TEMP_SENSOR);
+ ctrl &= ~CONTROL_TEMP_SENSOR_CONTCONV;
+ SCM_WRITE_REG(sc, CONTROL_TEMP_SENSOR, ctrl);
+
+ sc->sc_sme = sysmon_envsys_create();
+ sc->sc_sme->sme_cookie = sc;
+ sc->sc_sme->sme_name = device_xname(sc->sc_dev);
+ sc->sc_sme->sme_refresh = omap3_scm_sensor_refresh;
+ sc->sc_sensor.units = ENVSYS_STEMP;
+ sc->sc_sensor.state = ENVSYS_SINVALID;
+ sc->sc_sensor.flags = ENVSYS_FHAS_ENTROPY;
+ strlcpy(sc->sc_sensor.desc, "TEMP", sizeof(sc->sc_sensor.desc));
+ sysmon_envsys_sensor_attach(sc->sc_sme, &sc->sc_sensor);
+ sysmon_envsys_register(sc->sc_sme);
+}
+
+static void
+omap3_scm_sensor_refresh(struct sysmon_envsys *sme, envsys_data_t *edata)
+{
+ struct omap3_scm_softc *sc = sme->sme_cookie;
+ int64_t val;
+ uint32_t ctrl;
+ int retry;
+
+ edata->state = ENVSYS_SINVALID;
+
+ /* If ADC is idle (EOCZ=0), request a single temperature conversion */
+ ctrl = SCM_READ_REG(sc, CONTROL_TEMP_SENSOR);
+ if ((ctrl & CONTROL_TEMP_SENSOR_EOCZ) == 0) {
+ /* Set SOC and wait until EOCZ is set */
+ ctrl |= CONTROL_TEMP_SENSOR_SOC;
+ SCM_WRITE_REG(sc, CONTROL_TEMP_SENSOR, ctrl);
+ for (retry = 1000; retry > 0; retry--) {
+ ctrl = SCM_READ_REG(sc, CONTROL_TEMP_SENSOR);
+ if (ctrl & CONTROL_TEMP_SENSOR_EOCZ)
+ break;
+ delay(1000);
+ }
+ if (retry == 0)
+ return;
+
+ /* Clear SOC and wait until EOCZ is cleared */
+ ctrl &= ~CONTROL_TEMP_SENSOR_SOC;
+ SCM_WRITE_REG(sc, CONTROL_TEMP_SENSOR, ctrl);
+ for (retry = 1000; retry > 0; retry--) {
+ ctrl = SCM_READ_REG(sc, CONTROL_TEMP_SENSOR);
+ if ((ctrl & CONTROL_TEMP_SENSOR_EOCZ) == 0)
+ break;
+ delay(1000);
+ }
+ if (retry == 0)
+ return;
+
+ /* Once EOCZ is cleared, TEMP bits are valid */
+ val = omap3_scm_adc2temp[ctrl & CONTROL_TEMP_SENSOR_TEMP_MASK];
+ edata->value_cur = val * (1000000/10) + 273150000;
+ edata->state = ENVSYS_SVALID;
+ }
+}
Home |
Main Index |
Thread Index |
Old Index