[src/trunk]: src/sys/dev/usb Comments corrections.

[skrll <skrll%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/8a0e04cc49d9
branches:  trunk
changeset: 785385:8a0e04cc49d9
user:      skrll <skrll%NetBSD.org@localhost>
date:      Mon Mar 11 09:35:38 2013 +0000

description:
Comments corrections.

diffstat:

 sys/dev/usb/if_smsc.c |  8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diffs (36 lines):

diff -r b16426797786 -r 8a0e04cc49d9 sys/dev/usb/if_smsc.c
--- a/sys/dev/usb/if_smsc.c     Mon Mar 11 02:12:15 2013 +0000
+++ b/sys/dev/usb/if_smsc.c     Mon Mar 11 09:35:38 2013 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: if_smsc.c,v 1.7 2013/01/26 07:52:16 skrll Exp $        */
+/*     $NetBSD: if_smsc.c,v 1.8 2013/03/11 09:35:38 skrll Exp $        */
 
 /*     $OpenBSD: if_smsc.c,v 1.4 2012/09/27 12:38:11 jsg Exp $ */
 /* $FreeBSD: src/sys/dev/usb/net/if_smsc.c,v 1.1 2012/08/15 04:03:55 gonzo Exp $ */
@@ -56,7 +56,7 @@
  * go through the packet data and decode the headers prior to sending.
  * On Linux they generally provide cues to the location of the csum and the
  * area to calculate it over, on FreeBSD we seem to have to do it all ourselves,
- * hence this is not as optimal and therefore h/w tX checksum is currently not
+ * hence this is not as optimal and therefore h/w TX checksum is currently not
  * implemented.
  */
 
@@ -798,7 +798,7 @@
         * There is a so called 'turbo mode' that the linux driver supports, it
         * seems to allow you to jam multiple frames per Rx transaction.
         * By default this driver supports that and therefore allows multiple
-        * frames per URB.
+        * frames per USB transfer.
         *
         * The xfer buffer size needs to reflect this as well, therefore based
         * on the calculations in the Linux driver the RX bufsize is set to
@@ -832,7 +832,7 @@
        }
 
        /*
-        * The following setings are used for 'turbo mode', a.k.a multiple
+        * The following settings are used for 'turbo mode', a.k.a multiple
         * frames per Rx transaction (again info taken form Linux driver).
         */
 #ifdef SMSC_TURBO