Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/external/bsd/dwc2/dist Adapt the NAK holdoff scheme for ...
details: https://anonhg.NetBSD.org/src/rev/fe5f7fc0497c
branches: trunk
changeset: 802109:fe5f7fc0497c
user: skrll <skrll%NetBSD.org@localhost>
date: Wed Sep 03 10:00:08 2014 +0000
description:
Adapt the NAK holdoff scheme for FS/LS devices from the Raspberry Pi
Foundation driver.
Should fix PR/49019 - RPI: interrupt storm when url0 is up
diffstat:
sys/external/bsd/dwc2/dist/dwc2_hcd.c | 21 +++++++++++++++++++--
sys/external/bsd/dwc2/dist/dwc2_hcd.h | 4 +++-
sys/external/bsd/dwc2/dist/dwc2_hcdintr.c | 15 +++++++++++++--
sys/external/bsd/dwc2/dist/dwc2_hcdqueue.c | 5 +++--
4 files changed, 38 insertions(+), 7 deletions(-)
diffs (129 lines):
diff -r 937e2495d880 -r fe5f7fc0497c sys/external/bsd/dwc2/dist/dwc2_hcd.c
--- a/sys/external/bsd/dwc2/dist/dwc2_hcd.c Tue Sep 02 23:26:20 2014 +0000
+++ b/sys/external/bsd/dwc2/dist/dwc2_hcd.c Wed Sep 03 10:00:08 2014 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: dwc2_hcd.c,v 1.13 2014/07/03 07:18:42 skrll Exp $ */
+/* $NetBSD: dwc2_hcd.c,v 1.14 2014/09/03 10:00:08 skrll Exp $ */
/*
* hcd.c - DesignWare HS OTG Controller host-mode routines
@@ -42,7 +42,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: dwc2_hcd.c,v 1.13 2014/07/03 07:18:42 skrll Exp $");
+__KERNEL_RCSID(0, "$NetBSD: dwc2_hcd.c,v 1.14 2014/09/03 10:00:08 skrll Exp $");
#include <sys/types.h>
#include <sys/kmem.h>
@@ -887,6 +887,23 @@
if (list_empty(&hsotg->free_hc_list))
break;
qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
+
+ /*
+ * Check to see if this is a NAK'd retransmit, in which case
+ * ignore for retransmission. We hold off on bulk/control
+ * retransmissions to reduce NAK interrupt overhead for
+ * cheeky devices that just hold off using NAKs.
+ */
+ if (qh->do_split &&
+ qh->nak_frame != 0xffff &&
+ dwc2_full_frame_num(qh->nak_frame) ==
+ dwc2_full_frame_num(dwc2_hcd_get_frame_number(hsotg))) {
+ qh_ptr = qh_ptr->next;
+ continue;
+ } else {
+ qh->nak_frame = 0xffff;
+ }
+
if (hsotg->core_params->uframe_sched > 0) {
if (hsotg->available_host_channels < 1)
break;
diff -r 937e2495d880 -r fe5f7fc0497c sys/external/bsd/dwc2/dist/dwc2_hcd.h
--- a/sys/external/bsd/dwc2/dist/dwc2_hcd.h Tue Sep 02 23:26:20 2014 +0000
+++ b/sys/external/bsd/dwc2/dist/dwc2_hcd.h Wed Sep 03 10:00:08 2014 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: dwc2_hcd.h,v 1.8 2014/04/03 06:34:58 skrll Exp $ */
+/* $NetBSD: dwc2_hcd.h,v 1.9 2014/09/03 10:00:08 skrll Exp $ */
/*
* hcd.h - DesignWare HS OTG Controller host-mode declarations
@@ -243,6 +243,7 @@
* @interval: Interval between transfers in (micro)frames
* @sched_frame: (Micro)frame to initialize a periodic transfer.
* The transfer executes in the following (micro)frame.
+ * @nak_frame: Internal variable used by the NAK holdoff code
* @frame_usecs: Internal variable used by the microframe scheduler
* @start_split_frame: (Micro)frame at which last start split was initialized
* @ntd: Actual number of transfer descriptors in a list
@@ -277,6 +278,7 @@
u16 usecs;
u16 interval;
u16 sched_frame;
+ u16 nak_frame;
u16 frame_usecs[8];
u16 start_split_frame;
u16 ntd;
diff -r 937e2495d880 -r fe5f7fc0497c sys/external/bsd/dwc2/dist/dwc2_hcdintr.c
--- a/sys/external/bsd/dwc2/dist/dwc2_hcdintr.c Tue Sep 02 23:26:20 2014 +0000
+++ b/sys/external/bsd/dwc2/dist/dwc2_hcdintr.c Wed Sep 03 10:00:08 2014 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: dwc2_hcdintr.c,v 1.9 2014/07/26 09:18:53 skrll Exp $ */
+/* $NetBSD: dwc2_hcdintr.c,v 1.10 2014/09/03 10:00:08 skrll Exp $ */
/*
* hcd_intr.c - DesignWare HS OTG Controller host-mode interrupt handling
@@ -40,7 +40,7 @@
* This file contains the interrupt handlers for Host mode
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: dwc2_hcdintr.c,v 1.9 2014/07/26 09:18:53 skrll Exp $");
+__KERNEL_RCSID(0, "$NetBSD: dwc2_hcdintr.c,v 1.10 2014/09/03 10:00:08 skrll Exp $");
#include <sys/types.h>
#include <sys/pool.h>
@@ -1211,6 +1211,17 @@
chnum);
/*
+ * When we get control/bulk NAKs then remember this so we holdoff on
+ * this qh until the beginning of the next frame
+ */
+ switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ case USB_ENDPOINT_XFER_BULK:
+ chan->qh->nak_frame = dwc2_hcd_get_frame_number(hsotg);
+ break;
+ }
+
+ /*
* Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
* interrupt. Re-start the SSPLIT transfer.
*/
diff -r 937e2495d880 -r fe5f7fc0497c sys/external/bsd/dwc2/dist/dwc2_hcdqueue.c
--- a/sys/external/bsd/dwc2/dist/dwc2_hcdqueue.c Tue Sep 02 23:26:20 2014 +0000
+++ b/sys/external/bsd/dwc2/dist/dwc2_hcdqueue.c Wed Sep 03 10:00:08 2014 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: dwc2_hcdqueue.c,v 1.10 2014/07/03 07:18:42 skrll Exp $ */
+/* $NetBSD: dwc2_hcdqueue.c,v 1.11 2014/09/03 10:00:08 skrll Exp $ */
/*
* hcd_queue.c - DesignWare HS OTG Controller host queuing routines
@@ -42,7 +42,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: dwc2_hcdqueue.c,v 1.10 2014/07/03 07:18:42 skrll Exp $");
+__KERNEL_RCSID(0, "$NetBSD: dwc2_hcdqueue.c,v 1.11 2014/09/03 10:00:08 skrll Exp $");
#include <sys/types.h>
#include <sys/kmem.h>
@@ -94,6 +94,7 @@
dev_speed = dwc2_host_get_speed(hsotg, urb->priv);
dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port);
+ qh->nak_frame = 0xffff;
if ((dev_speed == USB_SPEED_LOW || dev_speed == USB_SPEED_FULL) &&
hub_addr != 0 && hub_addr != 1) {
Home |
Main Index |
Thread Index |
Old Index