Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/trunk]: src/sys/net tap: Remove media from this virtual interface



details:   https://anonhg.NetBSD.org/src/rev/0d20d1683980
branches:  trunk
changeset: 944337:0d20d1683980
user:      roy <roy%NetBSD.org@localhost>
date:      Sat Sep 26 19:38:45 2020 +0000

description:
tap: Remove media from this virtual interface

It serves no purpose at all.

diffstat:

 sys/net/if_tap.c |  66 ++-----------------------------------------------------
 1 files changed, 3 insertions(+), 63 deletions(-)

diffs (142 lines):

diff -r 7a69268f5742 -r 0d20d1683980 sys/net/if_tap.c
--- a/sys/net/if_tap.c  Sat Sep 26 18:38:09 2020 +0000
+++ b/sys/net/if_tap.c  Sat Sep 26 19:38:45 2020 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: if_tap.c,v 1.117 2020/02/04 05:46:32 thorpej Exp $     */
+/*     $NetBSD: if_tap.c,v 1.118 2020/09/26 19:38:45 roy Exp $ */
 
 /*
  *  Copyright (c) 2003, 2004, 2008, 2009 The NetBSD Foundation.
@@ -33,7 +33,7 @@
  */
 
 #include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: if_tap.c,v 1.117 2020/02/04 05:46:32 thorpej Exp $");
+__KERNEL_RCSID(0, "$NetBSD: if_tap.c,v 1.118 2020/09/26 19:38:45 roy Exp $");
 
 #if defined(_KERNEL_OPT)
 
@@ -65,7 +65,6 @@
 #include <net/if.h>
 #include <net/if_dl.h>
 #include <net/if_ether.h>
-#include <net/if_media.h>
 #include <net/if_tap.h>
 #include <net/bpf.h>
 
@@ -89,16 +88,8 @@
 static int     tap_sysctl_handler(SYSCTLFN_PROTO);
 static void    sysctl_tap_setup(struct sysctllog **);
 
-/*
- * Since we're an Ethernet device, we need the 2 following
- * components: a struct ethercom and a struct ifmedia
- * since we don't attach a PHY to ourselves.
- * We could emulate one, but there's no real point.
- */
-
 struct tap_softc {
        device_t        sc_dev;
-       struct ifmedia  sc_im;
        struct ethercom sc_ec;
        int             sc_flags;
 #define        TAP_INUSE       0x00000001      /* tap device can only be opened once */
@@ -191,18 +182,10 @@
 static int     tap_kqread(struct knote *, long);
 
 /*
- * Those are needed by the if_media interface.
- */
-
-static int     tap_mediachange(struct ifnet *);
-static void    tap_mediastatus(struct ifnet *, struct ifmediareq *);
-
-/*
  * Those are needed by the ifnet interface, and would typically be
  * there for any network interface driver.
  * Some other routines are optional: watchdog and drain.
  */
-
 static void    tap_start(struct ifnet *);
 static void    tap_stop(struct ifnet *, int);
 static int     tap_init(struct ifnet *);
@@ -344,24 +327,6 @@
            ether_snprintf(enaddrstr, sizeof(enaddrstr), enaddr));
 
        /*
-        * Why 1000baseT? Why not? You can add more.
-        *
-        * Note that there are 3 steps: init, one or several additions to
-        * list of supported media, and in the end, the selection of one
-        * of them.
-        */
-       sc->sc_ec.ec_ifmedia = &sc->sc_im;
-       ifmedia_init(&sc->sc_im, 0, tap_mediachange, tap_mediastatus);
-       ifmedia_add(&sc->sc_im, IFM_ETHER | IFM_1000_T, 0, NULL);
-       ifmedia_add(&sc->sc_im, IFM_ETHER | IFM_1000_T | IFM_FDX, 0, NULL);
-       ifmedia_add(&sc->sc_im, IFM_ETHER | IFM_100_TX, 0, NULL);
-       ifmedia_add(&sc->sc_im, IFM_ETHER | IFM_100_TX | IFM_FDX, 0, NULL);
-       ifmedia_add(&sc->sc_im, IFM_ETHER | IFM_10_T, 0, NULL);
-       ifmedia_add(&sc->sc_im, IFM_ETHER | IFM_10_T | IFM_FDX, 0, NULL);
-       ifmedia_add(&sc->sc_im, IFM_ETHER | IFM_AUTO, 0, NULL);
-       ifmedia_set(&sc->sc_im, IFM_ETHER | IFM_AUTO);
-
-       /*
         * One should note that an interface must do multicast in order
         * to support IPv6.
         */
@@ -385,7 +350,6 @@
        error = if_initialize(ifp);
        if (error != 0) {
                aprint_error_dev(self, "if_initialize failed(%d)\n", error);
-               ifmedia_removeall(&sc->sc_im);
                pmf_device_deregister(self);
                mutex_destroy(&sc->sc_lock);
                seldestroy(&sc->sc_rsel);
@@ -451,7 +415,6 @@
                    "sysctl_destroyv returned %d, ignoring\n", error);
        ether_ifdetach(ifp);
        if_detach(ifp);
-       ifmedia_fini(&sc->sc_im);
        seldestroy(&sc->sc_rsel);
        mutex_destroy(&sc->sc_lock);
        cv_destroy(&sc->sc_cv);
@@ -462,28 +425,6 @@
 }
 
 /*
- * This function is called by the ifmedia layer to notify the driver
- * that the user requested a media change.  A real driver would
- * reconfigure the hardware.
- */
-static int
-tap_mediachange(struct ifnet *ifp)
-{
-       return 0;
-}
-
-/*
- * Here the user asks for the currently used media.
- */
-static void
-tap_mediastatus(struct ifnet *ifp, struct ifmediareq *imr)
-{
-       struct tap_softc *sc = (struct tap_softc *)ifp->if_softc;
-
-       imr->ifm_active = sc->sc_im.ifm_cur->ifm_media;
-}
-
-/*
  * This is the function where we SEND packets.
  *
  * There is no 'receive' equivalent.  A typical driver will get
@@ -571,8 +512,7 @@
  * The latter is a hack I used to set the Ethernet address of the
  * faked device.
  *
- * Note that both ifmedia_ioctl() and ether_ioctl() have to be
- * called under splnet().
+ * Note that ether_ioctl() has to be called under splnet().
  */
 static int
 tap_ioctl(struct ifnet *ifp, u_long cmd, void *data)



Home | Main Index | Thread Index | Old Index