Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/sparc64/dev Add support for automatically changing ...
details: https://anonhg.NetBSD.org/src/rev/4f994b94be24
branches: trunk
changeset: 945249:4f994b94be24
user: jdc <jdc%NetBSD.org@localhost>
date: Sat Oct 24 15:16:39 2020 +0000
description:
Add support for automatically changing the CPU fan speed on the E250 in a
similar way to the SB1000/SB2000.
The fan control information was determined by experiment, as it's only
partially available in OFW.
Hardcode the missing information for E250 fan control into the driver
(it should be possible to support the E450 in future too).
diffstat:
sys/arch/sparc64/dev/pcf8591_envctrl.c | 202 ++++++++++++++++++++++++++++----
1 files changed, 177 insertions(+), 25 deletions(-)
diffs (truncated from 332 to 300 lines):
diff -r 97ff6223ba4e -r 4f994b94be24 sys/arch/sparc64/dev/pcf8591_envctrl.c
--- a/sys/arch/sparc64/dev/pcf8591_envctrl.c Sat Oct 24 14:51:59 2020 +0000
+++ b/sys/arch/sparc64/dev/pcf8591_envctrl.c Sat Oct 24 15:16:39 2020 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: pcf8591_envctrl.c,v 1.9 2018/06/26 06:03:57 thorpej Exp $ */
+/* $NetBSD: pcf8591_envctrl.c,v 1.10 2020/10/24 15:16:39 jdc Exp $ */
/* $OpenBSD: pcf8591_envctrl.c,v 1.6 2007/10/25 21:17:20 kettenis Exp $ */
/*
@@ -19,17 +19,25 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: pcf8591_envctrl.c,v 1.9 2018/06/26 06:03:57 thorpej Exp $");
+__KERNEL_RCSID(0, "$NetBSD: pcf8591_envctrl.c,v 1.10 2020/10/24 15:16:39 jdc Exp $");
#include <sys/param.h>
#include <sys/systm.h>
+#include <sys/kernel.h>
#include <sys/device.h>
#include <dev/sysmon/sysmonvar.h>
+#include <dev/sysmon/sysmon_taskq.h>
+
+#include <machine/autoconf.h>
#include <dev/ofw/openfirm.h>
#include <dev/i2c/i2cvar.h>
+/* Translation tables contain 254 entries */
+#define XLATE_SIZE 256
+#define XLATE_MAX (XLATE_SIZE - 2)
+
#define PCF8591_CHANNELS 4
#define PCF8591_CTRL_CH0 0x00
@@ -39,35 +47,48 @@
#define PCF8591_CTRL_AUTOINC 0x04
#define PCF8591_CTRL_OSCILLATOR 0x40
+#define PCF8591_TEMP_SENS 0x00
+#define PCF8591_CPU_FAN_CTRL 0x01
+#define PCF8591_PS_FAN_CTRL 0x02
+
struct ecadc_channel {
u_int chan_num;
+ u_int chan_type;
envsys_data_t chan_sensor;
u_char *chan_xlate;
int64_t chan_factor;
int64_t chan_min;
int64_t chan_warn;
int64_t chan_crit;
+ u_int8_t chan_speed;
};
struct ecadc_softc {
device_t sc_dev;
i2c_tag_t sc_tag;
i2c_addr_t sc_addr;
- u_char sc_ps_xlate[256];
- u_char sc_cpu_xlate[256];
+ u_char sc_ps_xlate[XLATE_SIZE];
+ u_char sc_cpu_xlate[XLATE_SIZE];
+ u_char sc_cpu_fan_spd[XLATE_SIZE];
u_int sc_nchan;
struct ecadc_channel sc_channels[PCF8591_CHANNELS];
struct sysmon_envsys *sc_sme;
+ int sc_hastimer;
+ callout_t sc_timer;
};
static int ecadc_match(device_t, cfdata_t, void *);
static void ecadc_attach(device_t, device_t, void *);
+static int ecadc_detach(device_t, int);
static void ecadc_refresh(struct sysmon_envsys *, envsys_data_t *);
static void ecadc_get_limits(struct sysmon_envsys *, envsys_data_t *,
- sysmon_envsys_lim_t *, uint32_t *);
+ sysmon_envsys_lim_t *, u_int32_t *);
+static void ecadc_timeout(void *);
+static void ecadc_fan_adjust(void *);
-CFATTACH_DECL_NEW(ecadc, sizeof(struct ecadc_softc),
- ecadc_match, ecadc_attach, NULL, NULL);
+CFATTACH_DECL3_NEW(ecadc, sizeof(struct ecadc_softc),
+ ecadc_match, ecadc_attach, ecadc_detach, NULL, NULL, NULL,
+ DVF_DETACH_SHUTDOWN);
static const struct device_compatible_entry compat_data[] = {
{ "ecadc", 0 },
@@ -102,6 +123,9 @@
u_int i;
sc->sc_dev = self;
+ sc->sc_nchan = 0;
+ sc->sc_hastimer = 0;
+
if ((len = OF_getprop(node, "thermisters", term,
sizeof(term))) < 0) {
aprint_error(": couldn't find \"thermisters\" property\n");
@@ -109,15 +133,14 @@
}
if (OF_getprop(node, "cpu-temp-factors", &sc->sc_cpu_xlate[2],
- sizeof(sc->sc_cpu_xlate) - 2) < 0) {
+ XLATE_MAX) < 0) {
aprint_error(": couldn't find \"cpu-temp-factors\" property\n");
return;
}
sc->sc_cpu_xlate[0] = sc->sc_cpu_xlate[1] = sc->sc_cpu_xlate[2];
/* Only the Sun Enterprise 450 has these. */
- OF_getprop(node, "ps-temp-factors", &sc->sc_ps_xlate[2],
- sizeof(sc->sc_ps_xlate) - 2);
+ OF_getprop(node, "ps-temp-factors", &sc->sc_ps_xlate[2], XLATE_MAX);
sc->sc_ps_xlate[0] = sc->sc_ps_xlate[1] = sc->sc_ps_xlate[2];
cp = term;
@@ -139,6 +162,7 @@
num = den = 1;
sc->sc_channels[sc->sc_nchan].chan_num = chan;
+ sc->sc_channels[sc->sc_nchan].chan_type = PCF8591_TEMP_SENS;
sensor = &sc->sc_channels[sc->sc_nchan].chan_sensor;
sensor->units = ENVSYS_STEMP;
@@ -164,6 +188,27 @@
sc->sc_nchan++;
}
+ /*
+ * Fan speed changing information is missing from OFW
+ * The E250 CPU fan is connected to the sensor at addr 0x4a, channel 1
+ */
+ if (ia->ia_addr == 0x4a && !strcmp(machine_model, "SUNW,Ultra-250") &&
+ OF_getprop(node, "cpu-fan-speeds", &sc->sc_cpu_fan_spd,
+ XLATE_MAX) > 0) {
+ sc->sc_channels[sc->sc_nchan].chan_num = 1;
+ sc->sc_channels[sc->sc_nchan].chan_type = PCF8591_CPU_FAN_CTRL;
+ sc->sc_channels[sc->sc_nchan].chan_speed = 0;
+ sensor = &sc->sc_channels[sc->sc_nchan].chan_sensor;
+ sensor->units = ENVSYS_INTEGER;
+ sensor->flags = ENVSYS_FMONNOTSUPP;
+ sensor->state = ENVSYS_SINVALID;
+ strlcpy(sensor->desc, "CPUFAN", sizeof(sensor->desc));
+ sc->sc_channels[sc->sc_nchan].chan_xlate = sc->sc_cpu_fan_spd;
+ sc->sc_nchan++;
+
+ sc->sc_hastimer = 1;
+ }
+
sc->sc_tag = ia->ia_tag;
sc->sc_addr = ia->ia_addr;
@@ -198,9 +243,30 @@
sysmon_envsys_destroy(sc->sc_sme);
return;
}
+
+ if (sc->sc_hastimer) {
+ callout_init(&sc->sc_timer, CALLOUT_MPSAFE);
+ callout_reset(&sc->sc_timer, hz*20, ecadc_timeout, sc);
+ }
aprint_naive(": Temp Sensors\n");
- aprint_normal(": %s Temp Sensors\n", ia->ia_name);
+ aprint_normal(": %s Temp Sensors (%d channels)\n", ia->ia_name,
+ sc->sc_nchan);
+}
+
+static int
+ecadc_detach(device_t self, int flags)
+{
+ struct ecadc_softc *sc = device_private(self);
+ if (sc->sc_hastimer) {
+ callout_halt(&sc->sc_timer, NULL);
+ callout_destroy(&sc->sc_timer);
+ }
+
+ if (sc->sc_sme != NULL)
+ sysmon_envsys_destroy(sc->sc_sme);
+
+ return 0;
}
static void
@@ -218,7 +284,10 @@
iic_release_bus(sc->sc_tag, 0);
return;
}
- /* NB: first byte out is stale, so read num_channels + 1 */
+ /*
+ * Each data byte that we read is the result of the previous request,
+ * so read num_channels + 1 and update envsys values from chan + 1.
+ */
if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_addr,
NULL, 0, data, PCF8591_CHANNELS + 1, 0)) {
iic_release_bus(sc->sc_tag, 0);
@@ -226,26 +295,38 @@
}
iic_release_bus(sc->sc_tag, 0);
- /* We only support temperature channels. */
+ /* Temperature with/without translation or relative (ADC value) */
for (i = 0; i < sc->sc_nchan; i++) {
struct ecadc_channel *chp = &sc->sc_channels[i];
- if (chp->chan_xlate)
- chp->chan_sensor.value_cur = 273150000 + 1000000 *
- chp->chan_xlate[data[1 + chp->chan_num]];
- else
- chp->chan_sensor.value_cur = 273150000 +
- chp->chan_factor * data[1 + chp->chan_num];
+ if (chp->chan_type == PCF8591_TEMP_SENS) {
+
+ /* Encode the raw value to use for the fan control */
+ if (chp->chan_xlate) {
+ int32_t temp;
+
+ temp = 273150000 + 1000000 *
+ chp->chan_xlate[data[1 + chp->chan_num]];
+ temp &= ~0xff;
+ temp += data[1 + chp->chan_num];
+ chp->chan_sensor.value_cur = temp;
+ } else
+ chp->chan_sensor.value_cur = 273150000 +
+ chp->chan_factor * data[1 + chp->chan_num];
+ chp->chan_sensor.flags |= ENVSYS_FMONLIMITS;
+ }
+ if (chp->chan_type == PCF8591_CPU_FAN_CTRL ||
+ chp->chan_type == PCF8591_PS_FAN_CTRL)
+ chp->chan_sensor.value_cur = data[1 + chp->chan_num];
chp->chan_sensor.state = ENVSYS_SVALID;
chp->chan_sensor.flags &= ~ENVSYS_FNEED_REFRESH;
- chp->chan_sensor.flags |= ENVSYS_FMONLIMITS;
}
}
static void
ecadc_get_limits(struct sysmon_envsys *sme, envsys_data_t *edata,
- sysmon_envsys_lim_t *limits, uint32_t *props)
+ sysmon_envsys_lim_t *limits, u_int32_t *props)
{
struct ecadc_softc *sc = sme->sme_cookie;
int i;
@@ -253,10 +334,81 @@
for (i = 0; i < sc->sc_nchan; i++) {
if (edata != &sc->sc_channels[i].chan_sensor)
continue;
- *props |= PROP_WARNMIN|PROP_WARNMAX|PROP_CRITMAX;
- limits->sel_warnmin = sc->sc_channels[i].chan_min;
- limits->sel_warnmax = sc->sc_channels[i].chan_warn;
- limits->sel_critmax = sc->sc_channels[i].chan_crit;
+ if (sc->sc_channels[i].chan_type == PCF8591_TEMP_SENS) {
+ *props |= PROP_WARNMIN|PROP_WARNMAX|PROP_CRITMAX;
+ limits->sel_warnmin = sc->sc_channels[i].chan_min;
+ limits->sel_warnmax = sc->sc_channels[i].chan_warn;
+ limits->sel_critmax = sc->sc_channels[i].chan_crit;
+ }
return;
}
}
+
+static void
+ecadc_timeout(void *v)
+{
+ struct ecadc_softc *sc = v;
+
+ sysmon_task_queue_sched(0, ecadc_fan_adjust, sc);
+ callout_reset(&sc->sc_timer, hz*60, ecadc_timeout, sc);
+}
+
+static bool
+is_cpu_temp(const envsys_data_t *edata)
+{
+ if (edata->units != ENVSYS_STEMP)
+ return false;
+ return strncmp(edata->desc, "CPU", 3) == 0;
+}
+
+static int
+ecadc_set_fan_speed(struct ecadc_softc *sc, u_int8_t chan, u_int8_t val)
+{
+ u_int8_t ctrl = PCF8591_CTRL_AUTOINC | PCF8591_CTRL_OSCILLATOR;
+ int ret;
+
+ ctrl |= chan;
+ iic_acquire_bus(sc->sc_tag, 0);
+ ret = iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr,
+ &ctrl, 1, &val, 1, 0);
+ if (ret)
+ aprint_error_dev(sc->sc_dev,
+ "error changing fan speed (ch %d)\n", chan);
+ else
+ aprint_debug_dev(sc->sc_dev,
+ "changed fan speed (ch %d) to 0x%x\n", chan, val);
+ iic_release_bus(sc->sc_tag, 0);
+ return ret;
+}
Home |
Main Index |
Thread Index |
Old Index