[src/trunk]: src/tests/net/if_pppoe Use a state of IPCP and IPv6CP to wait fo...

[yamaguchi <yamaguchi%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/5f12dc545f9a
branches:  trunk
changeset: 946392:5f12dc545f9a
user:      yamaguchi <yamaguchi%NetBSD.org@localhost>
date:      Wed Nov 25 10:35:07 2020 +0000

description:
Use a state of IPCP and IPv6CP to wait for connection established

diffstat:

 tests/net/if_pppoe/t_pppoe.sh |  65 +++++++++++++++++++++++-------------------
 1 files changed, 35 insertions(+), 30 deletions(-)

diffs (244 lines):

diff -r 19d4e2ffb805 -r 5f12dc545f9a tests/net/if_pppoe/t_pppoe.sh
--- a/tests/net/if_pppoe/t_pppoe.sh     Wed Nov 25 10:32:54 2020 +0000
+++ b/tests/net/if_pppoe/t_pppoe.sh     Wed Nov 25 10:35:07 2020 +0000
@@ -1,4 +1,4 @@
-#      $NetBSD: t_pppoe.sh,v 1.23 2020/09/25 06:15:30 yamaguchi Exp $
+#      $NetBSD: t_pppoe.sh,v 1.24 2020/11/25 10:35:07 yamaguchi Exp $
 #
 # Copyright (c) 2016 Internet Initiative Japan Inc.
 # All rights reserved.
@@ -113,14 +113,18 @@
        unset RUMP_SERVER
 }
 
-wait_for_session_established()
+wait_for_opened()
 {
-       local dontfail=$1
+       local cp=$1
+       local dontfail=$2
        local n=$WAITTIME
 
        for i in $(seq $n); do
-               $HIJACKING pppoectl -d pppoe0 |grep -q "state = session"
-               [ $? = 0 ] && return
+               $HIJACKING pppoectl -dd pppoe0 | grep -q "$cp state: opened"
+               if [ $? = 0 ]; then
+                       rump.ifconfig -w 10
+                       return
+               fi
                sleep 1
        done
 
@@ -135,12 +139,10 @@
        local n=$WAITTIME
 
        for i in $(seq $n); do
-               $HIJACKING pppoectl -d pppoe0 | grep -q "state = initial"
-               [ $? = 0 ] && return
-               # If PPPoE client is disconnected by PPPoE server and then
-               # the client kicks callout of pppoe_timeout(), the client
-               # state is changed to PPPOE_STATE_PADI_SENT while padi retrying.
-               $HIJACKING pppoectl -d pppoe0 | grep -q "state = PADI sent"
+               # If PPPoE client is disconnected by PPPoE server, then
+               # the LCP state will of the client is in a starting to send PADI.
+               $HIJACKING pppoectl -dd pppoe0 | grep -q \
+                   -e "LCP state: initial" -e "LCP state: starting"
                [ $? = 0 ] && return
 
                sleep 1
@@ -154,6 +156,7 @@
 run_test()
 {
        local auth=$1
+       local cp="IPCP"
        setup
 
        # As pppoe client doesn't support rechallenge yet.
@@ -180,7 +183,7 @@
        atf_check -s exit:0 -x "$HIJACKING $setup_clientparam"
        atf_check -s exit:0 rump.ifconfig pppoe0 up
        $DEBUG && rump.ifconfig
-       wait_for_session_established
+       wait_for_opened $cp
        atf_check -s exit:0 -o ignore rump.ping -c 1 -w $TIMEOUT $SERVER_IP
        unset RUMP_SERVER
 
@@ -198,7 +201,7 @@
        # test for reconnecting
        atf_check -s exit:0 -x "env RUMP_SERVER=$SERVER rump.ifconfig pppoe0 up"
        export RUMP_SERVER=$CLIENT
-       wait_for_session_established
+       wait_for_opened $cp
        atf_check -s exit:0 -o ignore rump.ping -c 1 -w $TIMEOUT $SERVER_IP
        unset RUMP_SERVER
 
@@ -217,7 +220,7 @@
        # test for reconnecting
        export RUMP_SERVER=$CLIENT
        atf_check -s exit:0 -x rump.ifconfig pppoe0 up
-       wait_for_session_established
+       wait_for_opened $cp
        $DEBUG && rump.ifconfig pppoe0
        $DEBUG && $HIJACKING pppoectl -d pppoe0
        unset RUMP_SERVER
@@ -240,7 +243,7 @@
                                    'max-auth-failure=1'"
        atf_check -s exit:0 -x "$HIJACKING $setup_clientparam"
        atf_check -s exit:0 rump.ifconfig pppoe0 up
-       wait_for_session_established dontfail
+       wait_for_opened $cp dontfail
        atf_check -s not-exit:0 -o ignore -e ignore \
            rump.ping -c 1 -w $TIMEOUT $SERVER_IP
        atf_check -s exit:0 -o match:'DETACHED' rump.ifconfig pppoe0
@@ -290,6 +293,7 @@
 run_test6()
 {
        local auth=$1
+       local cp="IPv6CP"
        setup "inet=false"
 
        # As pppoe client doesn't support rechallenge yet.
@@ -318,7 +322,7 @@
        atf_check -s exit:0 rump.ifconfig pppoe0 inet6 $CLIENT_IP6/64 down
        atf_check -s exit:0 rump.ifconfig pppoe0 up
        $DEBUG && rump.ifconfig
-       wait_for_session_established
+       wait_for_opened $cp
        atf_check -s exit:0 -o ignore rump.ifconfig -w 10
        export RUMP_SERVER=$SERVER
        atf_check -s exit:0 -o ignore rump.ifconfig -w 10
@@ -341,7 +345,7 @@
        # test for reconnecting
        export RUMP_SERVER=$SERVER
        atf_check -s exit:0 rump.ifconfig pppoe0 up
-       wait_for_session_established
+       wait_for_opened $cp
        atf_check -s exit:0 rump.ifconfig -w 10
        $DEBUG && $HIJACKING pppoectl -d pppoe0
        $DEBUG && rump.ifconfig pppoe0
@@ -366,7 +370,7 @@
        # test for reconnecting
        export RUMP_SERVER=$CLIENT
        atf_check -s exit:0 rump.ifconfig pppoe0 up
-       wait_for_session_established
+       wait_for_opened $cp
        atf_check -s exit:0 rump.ifconfig -w 10
 
        $DEBUG && rump.ifconfig pppoe0
@@ -391,7 +395,7 @@
                                    'max-auth-failure=1'"
        atf_check -s exit:0 -x "$HIJACKING $setup_clientparam"
        atf_check -s exit:0 rump.ifconfig pppoe0 up
-       wait_for_session_established dontfail
+       wait_for_opened $cp dontfail
        atf_check -s not-exit:0 -o ignore -e ignore \
            rump.ping6 -c 1 -X $TIMEOUT $SERVER_IP6
        atf_check -s exit:0 -o match:'DETACHED' rump.ifconfig pppoe0
@@ -483,6 +487,7 @@
 pppoe_params_body()
 {
        local dumpcmd
+       local cp="LCP"
 
        dumpcmd="shmif_dumpbus -p - ${BUS}"
        dumpcmd="${dumpcmd} | tcpdump -n -e -r -"
@@ -502,7 +507,7 @@
        atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0"
        atf_check -s exit:0 rump.ifconfig pppoe0 up
        $DEBUG && rump.ifconfig
-       wait_for_session_established
+       wait_for_opened $cp
        unset RUMP_SERVER
 
        $DEBUG && dump_bus
@@ -520,7 +525,7 @@
        atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 -a ACNAME-TEST0 pppoe0"
        atf_check -s exit:0 rump.ifconfig pppoe0 up
        $DEBUG && rump.ifconfig
-       wait_for_session_established
+       wait_for_opened $cp
        unset RUMP_SERVER
 
        $DEBUG && dump_bus
@@ -534,7 +539,7 @@
        atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 -a ACNAME-TEST1 pppoe0"
        atf_check -s exit:0 rump.ifconfig pppoe0 up
        $DEBUG && rump.ifconfig
-       wait_for_session_established
+       wait_for_opened $cp
        unset RUMP_SERVER
 
        $DEBUG && dump_bus
@@ -559,7 +564,7 @@
        atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0"
        atf_check -s exit:0 rump.ifconfig pppoe0 up
        $DEBUG && rump.ifconfig
-       wait_for_session_established
+       wait_for_opened $cp
        unset RUMP_SERVER
 
        $DEBUG && dump_bus
@@ -577,7 +582,7 @@
        atf_check -s exit:0 -x "$HIJACKING pppoectl -a \"\" -e shmif0 pppoe0"
        atf_check -s exit:0 rump.ifconfig pppoe0 up
        $DEBUG && rump.ifconfig
-       wait_for_session_established
+       wait_for_opened $cp
        unset RUMP_SERVER
 
        atf_check -s exit:0 -o match:'\[AC-Name\]' -e ignore \
@@ -600,7 +605,7 @@
        atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 -s SNAME-TEST0 pppoe0"
        atf_check -s exit:0 rump.ifconfig pppoe0 up
        $DEBUG && rump.ifconfig
-       wait_for_session_established
+       wait_for_opened $cp
        unset RUMP_SERVER
 
        $DEBUG && dump_bus
@@ -618,7 +623,7 @@
        atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 -s SNAME-TEST1 pppoe0"
        atf_check -s exit:0 rump.ifconfig pppoe0 up
        $DEBUG && rump.ifconfig
-       wait_for_session_established
+       wait_for_opened $cp
        unset RUMP_SERVER
 
        $DEBUG && dump_bus
@@ -645,7 +650,7 @@
        atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0"
        atf_check -s exit:0 rump.ifconfig pppoe0 up
        $DEBUG && rump.ifconfig
-       wait_for_session_established
+       wait_for_opened $cp
        unset RUMP_SERVER
 
        $DEBUG && dump_bus
@@ -674,7 +679,7 @@
            "$HIJACKING pppoectl -e shmif0 -a ACNAME-TEST3 -s SNAME-TEST3 pppoe0"
        atf_check -s exit:0 rump.ifconfig pppoe0 up
        $DEBUG && rump.ifconfig
-       wait_for_session_established
+       wait_for_opened $cp
        unset RUMP_SERVER
 
        $DEBUG && dump_bus
@@ -693,7 +698,7 @@
            "$HIJACKING pppoectl -e shmif0 -a ACNAME-TEST4 pppoe0"
        atf_check -s exit:0 rump.ifconfig pppoe0 up
        $DEBUG && rump.ifconfig
-       wait_for_session_established
+       wait_for_opened $cp
        unset RUMP_SERVER
 
        $DEBUG && dump_bus
@@ -714,7 +719,7 @@
            "$HIJACKING pppoectl -e shmif0 -s SNAME-TEST6 pppoe0"
        atf_check -s exit:0 rump.ifconfig pppoe0 up
        $DEBUG && rump.ifconfig
-       wait_for_session_established
+       wait_for_opened $cp
        unset RUMP_SERVER
 
        $DEBUG && dump_bus