[src/trunk]: src/usr.bin/make make: use distinct wording for writing to the s...

[rillig <rillig%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/d1c57fa814ec
branches:  trunk
changeset: 961346:d1c57fa814ec
user:      rillig <rillig%NetBSD.org@localhost>
date:      Fri Apr 16 16:49:27 2021 +0000

description:
make: use distinct wording for writing to the shell commands file

The word 'write' now means to write to the file that holds the shell
commands to be run later.

The word 'print' is now used exclusively for handling the output of the
child commands and printing them to make's stdout.

No functional change.

diffstat:

 usr.bin/make/job.c                 |  74 ++++++++++++++++++++-----------------
 usr.bin/make/unit-tests/sh-jobs.mk |   8 ++--
 2 files changed, 43 insertions(+), 39 deletions(-)

diffs (273 lines):

diff -r fcecd8e2f7c0 -r d1c57fa814ec usr.bin/make/job.c
--- a/usr.bin/make/job.c        Fri Apr 16 16:10:01 2021 +0000
+++ b/usr.bin/make/job.c        Fri Apr 16 16:49:27 2021 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: job.c,v 1.428 2021/04/16 16:10:01 rillig Exp $ */
+/*     $NetBSD: job.c,v 1.429 2021/04/16 16:49:27 rillig Exp $ */
 
 /*
  * Copyright (c) 1988, 1989, 1990 The Regents of the University of California.
@@ -142,7 +142,7 @@
 #include "trace.h"
 
 /*     "@(#)job.c      8.2 (Berkeley) 3/19/94" */
-MAKE_RCSID("$NetBSD: job.c,v 1.428 2021/04/16 16:10:01 rillig Exp $");
+MAKE_RCSID("$NetBSD: job.c,v 1.429 2021/04/16 16:49:27 rillig Exp $");
 
 /*
  * A shell defines how the commands are run.  All commands for a target are
@@ -223,8 +223,8 @@
        bool always;
 
        /*
-        * true if we turned error checking off before printing the command
-        * and need to turn it back on
+        * true if we turned error checking off before writing the command to
+        * the commands file and need to turn it back on
         */
        bool ignerr;
 } CommandFlags;
@@ -760,7 +760,7 @@
 }
 
 static void
-ShellWriter_PrintFmt(ShellWriter *wr, const char *fmt, const char *arg)
+ShellWriter_WriteFmt(ShellWriter *wr, const char *fmt, const char *arg)
 {
        DEBUG1(JOB, fmt, arg);
 
@@ -770,36 +770,36 @@
 }
 
 static void
-ShellWriter_Println(ShellWriter *wr, const char *line)
+ShellWriter_WriteLine(ShellWriter *wr, const char *line)
 {
-       ShellWriter_PrintFmt(wr, "%s\n", line);
+       ShellWriter_WriteFmt(wr, "%s\n", line);
 }
 
 static void
 ShellWriter_EchoOff(ShellWriter *wr)
 {
        if (shell->hasEchoCtl)
-               ShellWriter_Println(wr, shell->echoOff);
+               ShellWriter_WriteLine(wr, shell->echoOff);
 }
 
 static void
 ShellWriter_EchoCmd(ShellWriter *wr, const char *escCmd)
 {
-       ShellWriter_PrintFmt(wr, shell->echoTmpl, escCmd);
+       ShellWriter_WriteFmt(wr, shell->echoTmpl, escCmd);
 }
 
 static void
 ShellWriter_EchoOn(ShellWriter *wr)
 {
        if (shell->hasEchoCtl)
-               ShellWriter_Println(wr, shell->echoOn);
+               ShellWriter_WriteLine(wr, shell->echoOn);
 }
 
 static void
 ShellWriter_TraceOn(ShellWriter *wr)
 {
        if (!wr->xtraced) {
-               ShellWriter_Println(wr, "set -x");
+               ShellWriter_WriteLine(wr, "set -x");
                wr->xtraced = true;
        }
 }
@@ -809,7 +809,7 @@
 {
        if (echo)
                ShellWriter_EchoOff(wr);
-       ShellWriter_Println(wr, shell->errOff);
+       ShellWriter_WriteLine(wr, shell->errOff);
        if (echo)
                ShellWriter_EchoOn(wr);
 }
@@ -819,7 +819,7 @@
 {
        if (echo)
                ShellWriter_EchoOff(wr);
-       ShellWriter_Println(wr, shell->errOn);
+       ShellWriter_WriteLine(wr, shell->errOn);
        if (echo)
                ShellWriter_EchoOn(wr);
 }
@@ -830,7 +830,7 @@
  * (configurable per shell).
  */
 static void
-JobPrintSpecialsEchoCtl(Job *job, ShellWriter *wr, CommandFlags *inout_cmdFlags,
+JobWriteSpecialsEchoCtl(Job *job, ShellWriter *wr, CommandFlags *inout_cmdFlags,
                        const char *escCmd, const char **inout_cmdTemplate)
 {
        /* XXX: Why is the job modified at this point? */
@@ -860,7 +860,7 @@
 }
 
 static void
-JobPrintSpecials(Job *job, ShellWriter *wr, const char *escCmd, bool run,
+JobWriteSpecials(Job *job, ShellWriter *wr, const char *escCmd, bool run,
                 CommandFlags *inout_cmdFlags, const char **inout_cmdTemplate)
 {
        if (!run) {
@@ -872,34 +872,38 @@
        } else if (shell->hasErrCtl)
                ShellWriter_ErrOff(wr, job->echo && inout_cmdFlags->echo);
        else if (shell->runIgnTmpl != NULL && shell->runIgnTmpl[0] != '\0') {
-               JobPrintSpecialsEchoCtl(job, wr, inout_cmdFlags, escCmd,
+               JobWriteSpecialsEchoCtl(job, wr, inout_cmdFlags, escCmd,
                    inout_cmdTemplate);
        } else
                inout_cmdFlags->ignerr = false;
 }
 
 /*
- * Put out another command for the given job.
+ * Write a shell command to the job's commands file, to be run later.
  *
  * If the command starts with '@' and neither the -s nor the -n flag was
- * given to make, we stick a shell-specific echoOff command in the script.
+ * given to make, stick a shell-specific echoOff command in the script.
  *
  * If the command starts with '-' and the shell has no error control (none
- * of the predefined shells has that), we ignore errors for the entire job.
- * XXX: Why ignore errors for the entire job?
- * XXX: Even ignore errors for the commands before this command?
+ * of the predefined shells has that), ignore errors for the entire job.
+ *
+ * XXX: Why ignore errors for the entire job?  This is even documented in the
+ * manual page, but without any rationale since there is no known rationale.
  *
- * If the command is just "...", all further commands of this job are skipped
- * for now.  They are attached to the .END node and will be run by Job_Finish
- * after all other targets have been made.
+ * XXX: The manual page says the '-' "affects the entire job", but that's not
+ * accurate.  The '-' does not affect the commands before the '-'.
+ *
+ * If the command is just "...", skip all further commands of this job.  These
+ * commands are attached to the .END node instead and will be run by
+ * Job_Finish after all other targets have been made.
  */
 static void
-JobPrintCommand(Job *job, ShellWriter *wr, StringListNode *ln, const char *ucmd)
+JobWriteCommand(Job *job, ShellWriter *wr, StringListNode *ln, const char *ucmd)
 {
        bool run;
 
        CommandFlags cmdFlags;
-       /* Template for printing a command to the shell file */
+       /* Template for writing a command to the shell file */
        const char *cmdTemplate;
        char *xcmd;             /* The expanded command */
        char *xcmdStart;
@@ -943,7 +947,7 @@
        }
 
        if (cmdFlags.ignerr) {
-               JobPrintSpecials(job, wr, escCmd, run, &cmdFlags, &cmdTemplate);
+               JobWriteSpecials(job, wr, escCmd, run, &cmdFlags, &cmdTemplate);
        } else {
 
                /*
@@ -974,7 +978,7 @@
        if (DEBUG(SHELL) && strcmp(shellName, "sh") == 0)
                ShellWriter_TraceOn(wr);
 
-       ShellWriter_PrintFmt(wr, cmdTemplate, xcmd);
+       ShellWriter_WriteFmt(wr, cmdTemplate, xcmd);
        free(xcmdStart);
        free(escCmd);
 
@@ -986,15 +990,15 @@
 }
 
 /*
- * Print all commands to the shell file that is later executed.
+ * Write all commands to the shell file that is later executed.
  *
- * The special command "..." stops printing and saves the remaining commands
+ * The special command "..." stops writing and saves the remaining commands
  * to be executed later, when the target '.END' is made.
  *
  * Return whether at least one command was written to the shell file.
  */
 static bool
-JobPrintCommands(Job *job)
+JobWriteCommands(Job *job)
 {
        StringListNode *ln;
        bool seen = false;
@@ -1012,7 +1016,7 @@
                        break;
                }
 
-               JobPrintCommand(job, &wr, ln, ln->datum);
+               JobWriteCommand(job, &wr, ln, ln->datum);
                seen = true;
        }
 
@@ -1600,7 +1604,7 @@
        }
 #endif
 
-       *out_run = JobPrintCommands(job);
+       *out_run = JobWriteCommands(job);
 }
 
 /*
@@ -1671,13 +1675,13 @@
                (void)fflush(job->cmdFILE);
        } else if (!GNode_ShouldExecute(gn)) {
                /*
-                * Just print all the commands to stdout in one fell swoop.
+                * Just write all the commands to stdout in one fell swoop.
                 * This still sets up job->tailCmds correctly.
                 */
                SwitchOutputTo(gn);
                job->cmdFILE = stdout;
                if (cmdsOK)
-                       JobPrintCommands(job);
+                       JobWriteCommands(job);
                run = false;
                (void)fflush(job->cmdFILE);
        } else {
diff -r fcecd8e2f7c0 -r d1c57fa814ec usr.bin/make/unit-tests/sh-jobs.mk
--- a/usr.bin/make/unit-tests/sh-jobs.mk        Fri Apr 16 16:10:01 2021 +0000
+++ b/usr.bin/make/unit-tests/sh-jobs.mk        Fri Apr 16 16:49:27 2021 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: sh-jobs.mk,v 1.3 2020/12/11 01:06:10 rillig Exp $
+# $NetBSD: sh-jobs.mk,v 1.4 2021/04/16 16:49:27 rillig Exp $
 #
 # Tests for the "run in jobs mode" part of the "Shell Commands" section
 # from the manual page.
@@ -14,14 +14,14 @@
 # would lead to a syntax error in the generated shell file, at least for
 # bash and dash, but not for NetBSD sh and ksh.
 #
-# See JobPrintCommand, cmdTemplate, runIgnTmpl
+# See JobWriteCommand, cmdTemplate, runIgnTmpl
 comment: .PHONY
        @# comment
 
 # If a shell command starts with a comment character after stripping the
 # leading '@', it is run in ignore-errors mode.
 #
-# See JobPrintCommand, cmdTemplate, runIgnTmpl
+# See JobWriteCommand, cmdTemplate, runIgnTmpl
 comment-with-followup-line: .PHONY
        @# comment${.newline}echo '$@: This is printed.'; false
        @true
@@ -29,7 +29,7 @@
 # Without the comment, the commands are run in the default mode, which checks
 # the exit status of every makefile line.
 #
-# See JobPrintCommand, cmdTemplate, runChkTmpl
+# See JobWriteCommand, cmdTemplate, runChkTmpl
 no-comment: .PHONY
        @echo '$@: This is printed.'; false
        @true