Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/netbsd-9]: src/sys/dev/pci Pull up the following revisions, requested by...
details: https://anonhg.NetBSD.org/src/rev/56ba864bccc7
branches: netbsd-9
changeset: 964021:56ba864bccc7
user: martin <martin%NetBSD.org@localhost>
date: Thu Jul 16 12:39:11 2020 +0000
description:
Pull up the following revisions, requested by msaitoh in ticket #1017:
sys/dev/pci/piixpm.c 1.57-1.59, 1.61-1.63 via patch
sys/dev/pci/piixpmreg.h 1.9-1.12
- Fix number of port for Hudson rev. 0x1f and newer.
- Read SB800_SMB_HOSTC correctly. This register is not in the PCI
config space but in the I/O space.
- The bit 0 of SB800_SMB_HOSTC is 0 on SMI and 1 on IRQ, so invert the
check.
- Don't force using SMBUS0SEL register.
- Acquire/release host semaphore to share SMBus between the host and
the embedded controller (IMC). Without this change, "shutdown -r"
does power off and not boot on some machines.
- Save/restore port number before selecting port.
- Modify comment.
- Whitespace fix.
diffstat:
sys/dev/pci/piixpm.c | 157 ++++++++++++++++++++++++++++++++++-------------
sys/dev/pci/piixpmreg.h | 35 +++++++---
2 files changed, 138 insertions(+), 54 deletions(-)
diffs (truncated from 344 to 300 lines):
diff -r 7de41cd5be08 -r 56ba864bccc7 sys/dev/pci/piixpm.c
--- a/sys/dev/pci/piixpm.c Thu Jul 16 12:34:49 2020 +0000
+++ b/sys/dev/pci/piixpm.c Thu Jul 16 12:39:11 2020 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: piixpm.c,v 1.54 2019/07/13 09:24:17 msaitoh Exp $ */
+/* $NetBSD: piixpm.c,v 1.54.2.1 2020/07/16 12:39:11 martin Exp $ */
/* $OpenBSD: piixpm.c,v 1.39 2013/10/01 20:06:02 sf Exp $ */
/*
@@ -22,7 +22,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: piixpm.c,v 1.54 2019/07/13 09:24:17 msaitoh Exp $");
+__KERNEL_RCSID(0, "$NetBSD: piixpm.c,v 1.54.2.1 2020/07/16 12:39:11 martin Exp $");
#include <sys/param.h>
#include <sys/systm.h>
@@ -70,8 +70,11 @@
#define PIIXPM_IS_FCHGRP(sc) (PIIXPM_IS_HUDSON(sc) || PIIXPM_IS_KERNCZ(sc))
+#define PIIX_SB800_TIMEOUT 500
+
struct piixpm_smbus {
int sda;
+ int sda_save;
struct piixpm_softc *softc;
};
@@ -86,6 +89,7 @@
bus_space_handle_t sc_smb_ioh;
void * sc_smb_ih;
int sc_poll;
+ bool sc_sb800_selen; /* Use SMBUS0SEL */
pci_chipset_tag_t sc_pc;
pcitag_t sc_pcitag;
@@ -119,8 +123,8 @@
static int piixpm_sb800_init(struct piixpm_softc *);
static void piixpm_csb5_reset(void *);
-static int piixpm_i2c_acquire_bus(void *, int);
-static void piixpm_i2c_release_bus(void *, int);
+static int piixpm_i2c_sb800_acquire_bus(void *, int);
+static void piixpm_i2c_sb800_release_bus(void *, int);
static int piixpm_i2c_exec(void *, i2c_op_t, i2c_addr_t, const void *,
size_t, void *, size_t, int);
@@ -231,15 +235,10 @@
/* SB800 rev 0x40+, AMD HUDSON and newer need special initialization */
if (PIIXPM_IS_FCHGRP(sc) || PIIXPM_IS_SB800GRP(sc)) {
if (piixpm_sb800_init(sc) == 0) {
- sc->sc_numbusses = 4;
-
/* Read configuration */
- conf = pci_conf_read(pa->pa_pc, pa->pa_tag,
- SB800_SMB_HOSTC);
- DPRINTF(("%s: conf 0x%08x\n", device_xname(self),
- conf));
-
- usesmi = conf & SB800_SMB_HOSTC_SMI;
+ conf = bus_space_read_1(sc->sc_iot,
+ sc->sc_smb_ioh, SB800_SMB_HOSTC);
+ usesmi = ((conf & SB800_SMB_HOSTC_IRQ) == 0);
goto setintr;
}
aprint_normal_dev(self, "SMBus initialization failed\n");
@@ -328,17 +327,24 @@
/* Attach I2C bus */
for (i = 0; i < sc->sc_numbusses; i++) {
+ struct i2c_controller *tag = &sc->sc_i2c_tags[i];
+
if (sc->sc_i2c_device[i])
continue;
sc->sc_busses[i].sda = i;
sc->sc_busses[i].softc = sc;
- sc->sc_i2c_tags[i].ic_cookie = &sc->sc_busses[i];
- sc->sc_i2c_tags[i].ic_acquire_bus = piixpm_i2c_acquire_bus;
- sc->sc_i2c_tags[i].ic_release_bus = piixpm_i2c_release_bus;
- sc->sc_i2c_tags[i].ic_exec = piixpm_i2c_exec;
+ tag->ic_cookie = &sc->sc_busses[i];
+ if (PIIXPM_IS_SB800GRP(sc) || PIIXPM_IS_FCHGRP(sc)) {
+ tag->ic_acquire_bus = piixpm_i2c_sb800_acquire_bus;
+ tag->ic_release_bus = piixpm_i2c_sb800_release_bus;
+ } else {
+ tag->ic_acquire_bus = NULL;
+ tag->ic_release_bus = NULL;
+ }
+ tag->ic_exec = piixpm_i2c_exec;
memset(&iba, 0, sizeof(iba));
iba.iba_type = I2C_TYPE_SMBUS;
- iba.iba_tag = &sc->sc_i2c_tags[i];
+ iba.iba_tag = tag;
sc->sc_i2c_device[i] = config_found_ia(self, ifattr, &iba,
piixpm_iicbus_print);
}
@@ -401,6 +407,12 @@
uint16_t val, base_addr;
bool enabled;
+ if (PIIXPM_IS_KERNCZ(sc) ||
+ (PIIXPM_IS_HUDSON(sc) && (sc->sc_rev >= 0x1f)))
+ sc->sc_numbusses = 2;
+ else
+ sc->sc_numbusses = 4;
+
/* Fetch SMB base address */
if (bus_space_map(iot,
SB800_INDIRECTIO_BASE, SB800_INDIRECTIO_SIZE, 0, &ioh)) {
@@ -420,6 +432,8 @@
val = bus_space_read_1(iot, ioh, SB800_INDIRECTIO_DATA) << 8;
base_addr = val;
} else {
+ uint8_t data;
+
bus_space_write_1(iot, ioh, SB800_INDIRECTIO_INDEX,
SB800_PM_SMBUS0EN_LO);
val = bus_space_read_1(iot, ioh, SB800_INDIRECTIO_DATA);
@@ -434,15 +448,16 @@
bus_space_write_1(iot, ioh, SB800_INDIRECTIO_INDEX,
SB800_PM_SMBUS0SELEN);
- bus_space_write_1(iot, ioh, SB800_INDIRECTIO_DATA,
- SB800_PM_SMBUS0EN_ENABLE);
+ data = bus_space_read_1(iot, ioh, SB800_INDIRECTIO_DATA);
+ if ((data & SB800_PM_USE_SMBUS0SEL) != 0)
+ sc->sc_sb800_selen = true;
}
sc->sc_sb800_ioh = ioh;
aprint_debug_dev(sc->sc_dev, "SMBus @ 0x%04x\n", base_addr);
if (bus_space_map(iot, PCI_MAPREG_IO_ADDR(base_addr),
- PIIX_SMB_SIZE, 0, &sc->sc_smb_ioh)) {
+ SB800_SMB_SIZE, 0, &sc->sc_smb_ioh)) {
aprint_error_dev(sc->sc_dev, "can't map smbus I/O space\n");
return EBUSY;
}
@@ -472,51 +487,105 @@
}
static int
-piixpm_i2c_acquire_bus(void *cookie, int flags)
+piixpm_i2c_sb800_acquire_bus(void *cookie, int flags)
{
struct piixpm_smbus *smbus = cookie;
struct piixpm_softc *sc = smbus->softc;
+ uint8_t sctl, old_sda, index, mask, reg;
+ int i;
+
if (!cold)
mutex_enter(&sc->sc_i2c_mutex);
- if (PIIXPM_IS_KERNCZ(sc)) {
- bus_space_write_1(sc->sc_iot, sc->sc_sb800_ioh,
- SB800_INDIRECTIO_INDEX, AMDFCH41_PM_PORT_INDEX);
+ sctl = bus_space_read_1(sc->sc_smb_iot, sc->sc_smb_ioh, PIIX_SMB_SC);
+ for (i = 0; i < PIIX_SB800_TIMEOUT; i++) {
+ /* Try to acquire the host semaphore */
+ sctl &= ~PIIX_SMB_SC_SEMMASK;
+ bus_space_write_1(sc->sc_smb_iot, sc->sc_smb_ioh, PIIX_SMB_SC,
+ sctl | PIIX_SMB_SC_HOSTSEM);
+
+ sctl = bus_space_read_1(sc->sc_smb_iot, sc->sc_smb_ioh,
+ PIIX_SMB_SC);
+ if ((sctl & PIIX_SMB_SC_HOSTSEM) != 0)
+ break;
+
+ delay(1000);
+ }
+ if (i >= PIIX_SB800_TIMEOUT) {
+ device_printf(sc->sc_dev,
+ "Failed to acquire the host semaphore\n");
+ return -1;
+ }
+
+ if (PIIXPM_IS_KERNCZ(sc) ||
+ (PIIXPM_IS_HUDSON(sc) && (sc->sc_rev >= 0x1f))) {
+ index = AMDFCH41_PM_PORT_INDEX;
+ mask = AMDFCH41_SMBUS_PORTMASK;
+ } else if (sc->sc_sb800_selen) {
+ index = SB800_PM_SMBUS0SEL;
+ mask = SB800_PM_SMBUS0_MASK_E;
+ } else {
+ index = SB800_PM_SMBUS0EN_LO;
+ mask = SB800_PM_SMBUS0_MASK_C;
+ }
+
+ bus_space_write_1(sc->sc_iot, sc->sc_sb800_ioh,
+ SB800_INDIRECTIO_INDEX, index);
+ reg = bus_space_read_1(sc->sc_iot, sc->sc_sb800_ioh,
+ SB800_INDIRECTIO_DATA);
+
+ old_sda = __SHIFTOUT(reg, mask);
+ if (smbus->sda != old_sda) {
+ reg &= ~mask;
+ reg |= __SHIFTIN(smbus->sda, mask);
bus_space_write_1(sc->sc_iot, sc->sc_sb800_ioh,
- SB800_INDIRECTIO_DATA, smbus->sda << 3);
- } else if (PIIXPM_IS_SB800GRP(sc) || PIIXPM_IS_HUDSON(sc)) {
- bus_space_write_1(sc->sc_iot, sc->sc_sb800_ioh,
- SB800_INDIRECTIO_INDEX, SB800_PM_SMBUS0SEL);
- bus_space_write_1(sc->sc_iot, sc->sc_sb800_ioh,
- SB800_INDIRECTIO_DATA, smbus->sda << 1);
+ SB800_INDIRECTIO_DATA, reg);
}
+ /* Save the old port number */
+ smbus->sda_save = old_sda;
+
return 0;
}
static void
-piixpm_i2c_release_bus(void *cookie, int flags)
+piixpm_i2c_sb800_release_bus(void *cookie, int flags)
{
struct piixpm_smbus *smbus = cookie;
struct piixpm_softc *sc = smbus->softc;
+ uint8_t sctl, index, mask, reg;
- if (PIIXPM_IS_KERNCZ(sc)) {
- bus_space_write_1(sc->sc_iot, sc->sc_sb800_ioh,
- SB800_INDIRECTIO_INDEX, AMDFCH41_PM_PORT_INDEX);
+ if (PIIXPM_IS_KERNCZ(sc) ||
+ (PIIXPM_IS_HUDSON(sc) && (sc->sc_rev >= 0x1f))) {
+ index = AMDFCH41_PM_PORT_INDEX;
+ mask = AMDFCH41_SMBUS_PORTMASK;
+ } else if (sc->sc_sb800_selen) {
+ index = SB800_PM_SMBUS0SEL;
+ mask = SB800_PM_SMBUS0_MASK_E;
+ } else {
+ index = SB800_PM_SMBUS0EN_LO;
+ mask = SB800_PM_SMBUS0_MASK_C;
+ }
+
+ bus_space_write_1(sc->sc_iot, sc->sc_sb800_ioh,
+ SB800_INDIRECTIO_INDEX, index);
+ if (smbus->sda != smbus->sda_save) {
+ /* Restore the port number */
+ reg = bus_space_read_1(sc->sc_iot, sc->sc_sb800_ioh,
+ SB800_INDIRECTIO_DATA);
+ reg &= ~mask;
+ reg |= __SHIFTIN(smbus->sda_save, mask);
bus_space_write_1(sc->sc_iot, sc->sc_sb800_ioh,
- SB800_INDIRECTIO_DATA, 0);
- } else if (PIIXPM_IS_SB800GRP(sc) || PIIXPM_IS_HUDSON(sc)) {
- /*
- * HP Microserver hangs after reboot if not set to SDA0.
- * Also add shutdown hook?
- */
- bus_space_write_1(sc->sc_iot, sc->sc_sb800_ioh,
- SB800_INDIRECTIO_INDEX, SB800_PM_SMBUS0SEL);
- bus_space_write_1(sc->sc_iot, sc->sc_sb800_ioh,
- SB800_INDIRECTIO_DATA, 0);
+ SB800_INDIRECTIO_DATA, reg);
}
+ /* Relase the host semaphore */
+ sctl = bus_space_read_1(sc->sc_smb_iot, sc->sc_smb_ioh, PIIX_SMB_SC);
+ sctl &= ~PIIX_SMB_SC_SEMMASK;
+ bus_space_write_1(sc->sc_smb_iot, sc->sc_smb_ioh, PIIX_SMB_SC,
+ sctl | PIIX_SMB_SC_CLRHOSTSEM);
+
if (!cold)
mutex_exit(&sc->sc_i2c_mutex);
}
diff -r 7de41cd5be08 -r 56ba864bccc7 sys/dev/pci/piixpmreg.h
--- a/sys/dev/pci/piixpmreg.h Thu Jul 16 12:34:49 2020 +0000
+++ b/sys/dev/pci/piixpmreg.h Thu Jul 16 12:39:11 2020 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: piixpmreg.h,v 1.8 2019/07/13 09:24:17 msaitoh Exp $ */
+/* $NetBSD: piixpmreg.h,v 1.8.2.1 2020/07/16 12:39:11 martin Exp $ */
/* $OpenBSD: piixreg.h,v 1.3 2006/01/03 22:39:03 grange Exp $ */
/*-
@@ -66,7 +66,7 @@
#define PIIX_SMB_HOSTC 0xd0 /* SMBus host configuration */
#define PIIX_SMB_HOSTC_HSTEN (1 << 16) /* enable host controller */
#define PIIX_SMB_HOSTC_SMI (0 << 17) /* SMI */
-#define PIIX_SMB_HOSTC_IRQ (4 << 17) /* IRQ */
+#define PIIX_SMB_HOSTC_IRQ (4 << 17) /* IRQ 9 */
#define PIIX_SMB_HOSTC_INTMASK (7 << 17)
/* SMBus I/O registers */
@@ -95,6 +95,11 @@
#define PIIX_SMB_HBDB 0x07 /* host block data byte */
#define PIIX_SMB_SC 0x08 /* slave control */
#define PIIX_SMB_SC_ALERTEN (1 << 3) /* enable SMBALERT# */
+#define PIIX_SMB_SC_HOSTSEM (1 << 4) /* (W1S) HostSemaphore */
+#define PIIX_SMB_SC_CLRHOSTSEM (1 << 5) /* (W1C) ClrHostSemaphore */
+#define PIIX_SMB_SC_ECSEM (1 << 6) /* (W1S) EcSemaphore */
+#define PIIX_SMB_SC_CLRECSEM (1 << 7) /* (W1C) ClrEcSemaphore */
+#define PIIX_SMB_SC_SEMMASK 0xf0 /* Semaphore bits */
/* Power management I/O registers */
#define PIIX_PM_PMTMR 0x08 /* power management timer */
Home |
Main Index |
Thread Index |
Old Index