[src/trunk]: src/sys/arch/arm/sunxi Move MAC soft reset to sunxi_emac_init_lo...

[jmcneill <jmcneill%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/045fef61fb49
branches:  trunk
changeset: 994073:045fef61fb49
user:      jmcneill <jmcneill%NetBSD.org@localhost>
date:      Thu Oct 18 12:58:19 2018 +0000

description:
Move MAC soft reset to sunxi_emac_init_locked. Since the MAC can get stuck
in reset state with no link, ignore reset timeouts and continue with
initializing the device.

Fixes "soft reset timeout" issue at boot with no network cable plugged in.

diffstat:

 sys/arch/arm/sunxi/sunxi_emac.c |  77 ++++++++++++++++++++--------------------
 1 files changed, 38 insertions(+), 39 deletions(-)

diffs (127 lines):

diff -r 042259908991 -r 045fef61fb49 sys/arch/arm/sunxi/sunxi_emac.c
--- a/sys/arch/arm/sunxi/sunxi_emac.c   Thu Oct 18 11:34:54 2018 +0000
+++ b/sys/arch/arm/sunxi/sunxi_emac.c   Thu Oct 18 12:58:19 2018 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: sunxi_emac.c,v 1.18 2018/10/14 14:09:53 martin Exp $ */
+/* $NetBSD: sunxi_emac.c,v 1.19 2018/10/18 12:58:19 jmcneill Exp $ */
 
 /*-
  * Copyright (c) 2016-2017 Jared McNeill <jmcneill%invisible.ca@localhost>
@@ -33,7 +33,7 @@
 #include "opt_net_mpsafe.h"
 
 #include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: sunxi_emac.c,v 1.18 2018/10/14 14:09:53 martin Exp $");
+__KERNEL_RCSID(0, "$NetBSD: sunxi_emac.c,v 1.19 2018/10/18 12:58:19 jmcneill Exp $");
 
 #include <sys/param.h>
 #include <sys/bus.h>
@@ -584,6 +584,31 @@
 }
 
 static int
+sunxi_emac_reset(struct sunxi_emac_softc *sc)
+{
+       int retry;
+
+       /* Soft reset all registers and logic */
+       WR4(sc, EMAC_BASIC_CTL_1, BASIC_CTL_SOFT_RST);
+
+       /* Wait for soft reset bit to self-clear */
+       for (retry = SOFT_RST_RETRY; retry > 0; retry--) {
+               if ((RD4(sc, EMAC_BASIC_CTL_1) & BASIC_CTL_SOFT_RST) == 0)
+                       break;
+               delay(10);
+       }
+       if (retry == 0) {
+               aprint_debug_dev(sc->dev, "soft reset timed out\n");
+#ifdef SUNXI_EMAC_DEBUG
+               sunxi_emac_dump_regs(sc);
+#endif
+               return ETIMEDOUT;
+       }
+
+       return 0;
+}
+
+static int
 sunxi_emac_init_locked(struct sunxi_emac_softc *sc)
 {
        struct ifnet *ifp = &sc->ec.ec_if;
@@ -595,6 +620,13 @@
        if ((ifp->if_flags & IFF_RUNNING) != 0)
                return 0;
 
+       /* Soft reset EMAC core */
+       sunxi_emac_reset(sc);
+
+       /* Write transmit and receive descriptor base address registers */
+       WR4(sc, EMAC_TX_DMA_LIST, sc->tx.desc_ring_paddr);
+       WR4(sc, EMAC_RX_DMA_LIST, sc->rx.desc_ring_paddr);
+
        sunxi_emac_setup_rxfilter(sc);
 
        /* Configure DMA burst length and priorities */
@@ -1154,37 +1186,6 @@
 }
 
 static int
-sunxi_emac_reset(struct sunxi_emac_softc *sc)
-{
-       int retry;
-
-       /* Reset PHY if necessary */
-       if (sunxi_emac_phy_reset(sc) != 0) {
-               aprint_error_dev(sc->dev, "failed to reset PHY\n");
-               return ENXIO;
-       }
-
-       /* Soft reset all registers and logic */
-       WR4(sc, EMAC_BASIC_CTL_1, BASIC_CTL_SOFT_RST);
-
-       /* Wait for soft reset bit to self-clear */
-       for (retry = SOFT_RST_RETRY; retry > 0; retry--) {
-               if ((RD4(sc, EMAC_BASIC_CTL_1) & BASIC_CTL_SOFT_RST) == 0)
-                       break;
-               delay(10);
-       }
-       if (retry == 0) {
-               aprint_error_dev(sc->dev, "soft reset timed out\n");
-#ifdef SUNXI_EMAC_DEBUG
-               sunxi_emac_dump_regs(sc);
-#endif
-               return ETIMEDOUT;
-       }
-
-       return 0;
-}
-
-static int
 sunxi_emac_setup_dma(struct sunxi_emac_softc *sc)
 {
        struct mbuf *m;
@@ -1276,10 +1277,6 @@
            0, sc->rx.desc_map->dm_mapsize,
            BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
 
-       /* Write transmit and receive descriptor base address registers */
-       WR4(sc, EMAC_TX_DMA_LIST, sc->tx.desc_ring_paddr);
-       WR4(sc, EMAC_RX_DMA_LIST, sc->rx.desc_ring_paddr);
-
        return 0;
 }
 
@@ -1400,9 +1397,11 @@
        sunxi_emac_get_eaddr(sc, eaddr);
        aprint_normal_dev(self, "Ethernet address %s\n", ether_sprintf(eaddr));
 
-       /* Soft reset EMAC core */
-       if (sunxi_emac_reset(sc) != 0)
+       /* Reset PHY if necessary */
+       if (sunxi_emac_phy_reset(sc) != 0) {
+               aprint_error_dev(self, "failed to reset PHY\n");
                return;
+       }
 
        /* Setup DMA descriptors */
        if (sunxi_emac_setup_dma(sc) != 0) {