Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/evbarm/conf Remove RPI64 in favour of GENERIC64. R...
details: https://anonhg.NetBSD.org/src/rev/6ec512b10971
branches: trunk
changeset: 994724:6ec512b10971
user: skrll <skrll%NetBSD.org@localhost>
date: Mon Nov 19 13:28:48 2018 +0000
description:
Remove RPI64 in favour of GENERIC64. RPI64 was used during testing.
diffstat:
sys/arch/evbarm/conf/RPI64 | 265 ---------------------------------------------
1 files changed, 0 insertions(+), 265 deletions(-)
diffs (269 lines):
diff -r 5bfedce36c6f -r 6ec512b10971 sys/arch/evbarm/conf/RPI64
--- a/sys/arch/evbarm/conf/RPI64 Mon Nov 19 11:08:16 2018 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,265 +0,0 @@
-#
-# $NetBSD: RPI64,v 1.8 2018/10/12 01:28:58 ryo Exp $
-#
-# RPI64 - Raspberry Pi 3 and Pi 2 v1.2 in AARCH64 mode
-#
-
-include "arch/evbarm/conf/std.generic64"
-include "arch/evbarm/conf/GENERIC.common"
-include "arch/evbarm/conf/files.rpi"
-
-makeoptions DTSGNUARCH="arm arm64"
-makeoptions DTSSUBDIR="broadcom"
-
-makeoptions DTS="
- bcm2837-rpi-3-b.dts
- bcm2837-rpi-3-b-plus.dts
-"
-
-# CPU options
-options CPU_CORTEXA53
-options SOC_BCM2836
-options MULTIPROCESSOR
-
-# verbose bootstraping messages
-options EARLYCONS=bcm2837
-options VERBOSE_INIT_ARM
-
-# Standard system options
-options MSGBUFSIZE=32768
-
-# Architecture options
-
-# Development and Debugging options
-options DB_MAX_WIDTH=0
-options DB_MAX_LINE=64
-#options KGDB,KGDB_PLCOMUNIT=0,KGDB_DEVRATE=115200,KGDB_CONMODE=0xB00
-makeoptions DEBUG="-g" # compile full symbol table
-makeoptions COPY_SYMTAB=1
-options PLCONSOLE
-#options PLCONSOLE,PLCOMCNUNIT=0,PLCONSPEED=115200,PLCONMODE=0xB00
-
-#options DEBUG
-options LOCKDEBUG
-#options UVMHIST,UVMHIST_PRINT
-
-# USB Debugging options
-#options USB_DEBUG
-#options DWC2_DEBUG
-#options UHUB_DEBUG
-
-
-# Valid options for BOOT_ARGS:
-# single Boot to single user only
-# kdb Give control to kernel debugger
-# ask Ask for file name to reboot from
-# pmapdebug=<n> If PMAP_DEBUG, set pmap_debug_level to <n>
-# memorydisk=<n> Set memorydisk size to <n> KB
-# quiet Show aprint_naive output
-# verbose Show aprint_normal and aprint_verbose output
-#options BOOT_ARGS="\"\""
-
-config netbsd root on ? type ?
-
-options COMPAT_NETBSD32
-options EXEC_ELF32
-
-# Device tree support
-armfdt0 at root
-simplebus* at fdt? pass 0
-
-# The CPU(s)
-cpus* at fdt? pass 0
-cpu* at fdt? pass 0
-
-gtmr* at fdt? pass 1 # ARM Generic Timer
-armgtmr0 at gtmr?
-
-fclock* at fdt? pass 0
-
-# Interrupt Controller
-bcmicu* at fdt? pass 1
-
-# System timer
-#bcmtmr0 at fdt? pass 1
-
-# Clock manager
-bcmcprman0 at fdt? pass 1
-
-# AUX
-bcmaux0 at fdt? pass 2
-
-# pulse width modulator manager
-#bcmpwm0 at fdt?
-
-fregulator* at fdt?
-gpiokeys* at fdt?
-
-# GPIO LEDs
-gpioleds* at fdt?
-
-# VC Mailbox
-bcmmbox* at fdt?
-vcmbox* at bcmmbox?
-
-# DMA Controller
-bcmdmac0 at fdt?
-
-# VCHIQ
-#vchiq0 at fdt?
-
-# AUDS
-#vcaudio0 at vchiq0
-#audio* at audiobus?
-
-#spkr* at audio? # PC speaker (synthesized)
-
-# PL011 uart
-plcom* at fdt?
-
-# AUX UART
-com0 at fdt?
-
-# Framebuffer console
-genfb0 at fdt?
-wsdisplay* at genfb?
-options VCONS_DRAW_INTR
-#options RPI_HWCURSOR
-
-# Power management, Reset controller and Watchdog registers
-watchdog0 at fdt?
-
-# Random number generator
-bcmrng0 at fdt?
-
-# GPIO
-bcmgpio* at fdt?
-
-# Arasan SD/MMC Interface
-sdhc* at fdt?
-sdmmc* at sdhc?
-
-# SD host controller
-sdhost* at fdt?
-sdmmc* at sdhost?
-
-ld* at sdmmc?
-
-# On-board USB
-dwctwo* at fdt?
-usb* at dwctwo?
-
-# USB device drivers
-include "dev/usb/usbdevices.config"
-
-midi* at midibus?
-
-# MII/PHY support
-exphy* at mii? phy ? # 3Com internal PHYs
-gentbi* at mii? phy ? # Generic Ten-Bit 1000BASE-[CLS]X PHYs
-glxtphy* at mii? phy ? # Level One LXT-1000 PHYs
-gphyter* at mii? phy ? # NS83861 Gig-E PHY
-icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x
-igphy* at mii? phy ? # Intel IGP01E1000
-ihphy* at mii? phy ? # Intel 82577 PHYs
-ikphy* at mii? phy ? # Intel 82563 PHYs
-inphy* at mii? phy ? # Intel 82555 PHYs
-iophy* at mii? phy ? # Intel 82553 PHYs
-lxtphy* at mii? phy ? # Level One LXT-970 PHYs
-makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
-nsphy* at mii? phy ? # NS83840 PHYs
-nsphyter* at mii? phy ? # NS83843 PHYs
-pnaphy* at mii? phy ? # generic HomePNA PHYs
-qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
-rdcphy* at mii? phy ? # RDC R6040 10/100 PHY
-rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs
-rlphy* at mii? phy ? # Realtek 8139/8201L PHYs
-sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
-tlphy* at mii? phy ? # ThunderLAN PHYs
-tqphy* at mii? phy ? # TDK Semiconductor PHYs
-urlphy* at mii? phy ? # Realtek RTL8150L internal PHYs
-ukphy* at mii? phy ? # generic unknown PHYs
-
-# Broadcom Serial Control (I2C)
-bsciic* at fdt?
-iic* at i2cbus?
-
-# 'DS3231 Raspberry Pi RTC Board Real Time Clock Module for Arduino'
-# sold by linksprite.com
-#dsrtc* at iic1 addr 0x68 flags 3231
-
-# MCP7940 based PiFace Real Time Clock
-#dsrtc* at iic1 addr 0x6f flags 7940
-
-# SPI controller
-bcmspi* at fdt?
-spi* at spibus?
-
-# MCP3x0x ADC
-# flags selects the actual chip, refer to mcp3kadc(4)
-#mcp3kadc0 at spi? slave 0 flags 0
-
-# PIFace or other boards using that chip (needs gpio)
-#mcp23s17gpio0 at spi? slave 0 flags 0
-#mcp23s17gpio1 at spi? slave 0 flags 1
-#mcp23s17gpio2 at spi? slave 0 flags 2
-#mcp23s17gpio3 at spi? slave 0 flags 3
-
-# gpio support (e. g. mcp23s17gpio, bcmgpio)
-gpio* at gpiobus?
-
-# various options for wscons - we try to look as much like a standard
-# sun console as possible
-options WSEMUL_VT100 # sun terminal emulation
-options WS_DEFAULT_FG=WSCOL_WHITE
-options WS_DEFAULT_BG=WSCOL_BLACK
-options WS_KERNEL_FG=WSCOL_GREEN
-options WS_KERNEL_BG=WSCOL_BLACK
-options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
-options WSDISPLAY_COMPAT_SYSCONS # emulate some more ioctls
-options WSDISPLAY_COMPAT_USL # wsconscfg VT handling
-options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
-options WSDISPLAY_DEFAULTSCREENS=4
-
-#options FONT_QVSS8x15
-#options FONT_GALLANT12x22 # the console font
-
-# Pseudo-Devices
-
-# network pseudo-devices
-#pseudo-device carp # Common Address Redundancy Protocol
-#pseudo-device npf # NPF packet filter
-#pseudo-device kttcp # network loopback
-#pseudo-device ppp # Point-to-Point Protocol
-#pseudo-device pppoe # PPP over Ethernet (RFC 2516)
-#options PPPOE_SERVER # Enable PPPoE server via link0
-#pseudo-device sl # Serial Line IP
-#pseudo-device strip # Starmode Radio IP (Metricom)
-#pseudo-device irframetty # IrDA frame line discipline
-#pseudo-device tap # virtual Ethernet
-#pseudo-device tun # network tunneling over tty
-#pseudo-device gre # generic L3 over IP tunnel
-#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC 1933)
-#pseudo-device faith # IPv[46] TCP relay translation i/f
-#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
-#pseudo-device vlan # IEEE 802.1q encapsulation
-#pseudo-device bridge # simple inter-network bridging
-#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
-#pseudo-device agr # IEEE 802.3ad link aggregation
-
-# miscellaneous pseudo-devices
-pseudo-device openfirm
-
-# wscons pseudo-devices
-pseudo-device wsmux # mouse & keyboard multiplexor
-pseudo-device wsfont
-
-# userland interface to drivers, including autoconf and properties retrieval
-
-# local configuration
-cinclude "arch/evbarm/conf/RPI.local"
-
-# Bluetooth serial UART devices
-pseudo-device btuart
-pseudo-device bcsp
-pseudo-device bthfive
Home |
Main Index |
Thread Index |
Old Index