Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/dev/ata unbreak the build, someone forgot to commit more...
details: https://anonhg.NetBSD.org/src/rev/67844e55126a
branches: trunk
changeset: 998033:67844e55126a
user: christos <christos%NetBSD.org@localhost>
date: Fri Apr 05 20:44:09 2019 +0000
description:
unbreak the build, someone forgot to commit more stuff :-)
diffstat:
sys/dev/ata/atavar.h | 31 ++++++++++++++++---------------
1 files changed, 16 insertions(+), 15 deletions(-)
diffs (45 lines):
diff -r c2f7977c67f5 -r 67844e55126a sys/dev/ata/atavar.h
--- a/sys/dev/ata/atavar.h Fri Apr 05 20:09:29 2019 +0000
+++ b/sys/dev/ata/atavar.h Fri Apr 05 20:44:09 2019 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: atavar.h,v 1.101 2018/10/24 19:38:00 jdolecek Exp $ */
+/* $NetBSD: atavar.h,v 1.102 2019/04/05 20:44:09 christos Exp $ */
/*
* Copyright (c) 1998, 2001 Manuel Bouyer.
@@ -103,20 +103,21 @@
command */
volatile uint16_t flags;
-#define AT_READ 0x0001 /* There is data to read */
-#define AT_WRITE 0x0002 /* There is data to write (excl. with AT_READ) */
-#define AT_WAIT 0x0008 /* wait in controller code for command completion */
-#define AT_POLL 0x0010 /* poll for command completion (no interrupts) */
-#define AT_DONE 0x0020 /* command is done */
-#define AT_XFDONE 0x0040 /* data xfer is done */
-#define AT_ERROR 0x0080 /* command is done with error */
-#define AT_TIMEOU 0x0100 /* command timed out */
-#define AT_DF 0x0200 /* Drive fault */
-#define AT_RESET 0x0400 /* command terminated by channel reset */
-#define AT_GONE 0x0800 /* command terminated because device is gone */
-#define AT_READREG 0x1000 /* Read registers on completion */
-#define AT_LBA 0x2000 /* LBA28 */
-#define AT_LBA48 0x4000 /* LBA48 */
+#define AT_READ 0x0001 /* There is data to read */
+#define AT_WRITE 0x0002 /* There is data to write (excl. with AT_READ) */
+#define AT_WAIT 0x0008 /* wait in controller for command completion */
+#define AT_POLL 0x0010 /* poll for command completion (no interrupts) */
+#define AT_DONE 0x0020 /* command is done */
+#define AT_XFDONE 0x0040 /* data xfer is done */
+#define AT_ERROR 0x0080 /* command is done with error */
+#define AT_TIMEOU 0x0100 /* command timed out */
+#define AT_DF 0x0200 /* Drive fault */
+#define AT_RESET 0x0400 /* command terminated by channel reset */
+#define AT_GONE 0x0800 /* command terminated because device is gone */
+#define AT_READREG 0x1000 /* Read registers on completion */
+#define AT_LBA 0x2000 /* LBA28 */
+#define AT_LBA48 0x4000 /* LBA48 */
+#define AT_RST_NOCMD 0x8000 /* ??? */
int timeout; /* timeout (in ms) */
void *data; /* Data buffer address */
Home |
Main Index |
Thread Index |
Old Index