Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/external/gpl2/dts/dist/include/dt-bindings/input Merge c...
details: https://anonhg.NetBSD.org/src/rev/45761ccdf521
branches: trunk
changeset: 999216:45761ccdf521
user: jmcneill <jmcneill%NetBSD.org@localhost>
date: Sat May 25 11:48:05 2019 +0000
description:
Merge conflicts
diffstat:
sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm2835-rpi.dtsi | 12 +-
sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm283x.dtsi | 17 +-
sys/external/gpl2/dts/dist/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi | 53 -
sys/external/gpl2/dts/dist/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts | 415 ----------
sys/external/gpl2/dts/dist/arch/arm/boot/dts/skeleton.dtsi | 18 -
sys/external/gpl2/dts/dist/arch/arm/boot/dts/skeleton64.dtsi | 14 -
sys/external/gpl2/dts/dist/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts | 4 +
sys/external/gpl2/dts/dist/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 4 +
sys/external/gpl2/dts/dist/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 198 +---
sys/external/gpl2/dts/dist/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 367 +++++++-
sys/external/gpl2/dts/dist/arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 36 +-
sys/external/gpl2/dts/dist/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 70 +-
sys/external/gpl2/dts/dist/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 72 +-
sys/external/gpl2/dts/dist/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi | 51 +-
sys/external/gpl2/dts/dist/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 27 +-
sys/external/gpl2/dts/dist/include/dt-bindings/input/linux-event-codes.h | 10 +-
16 files changed, 567 insertions(+), 801 deletions(-)
diffs (truncated from 2591 to 300 lines):
diff -r c73b964d8f17 -r 45761ccdf521 sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm2835-rpi.dtsi
--- a/sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm2835-rpi.dtsi Sat May 25 11:29:13 2019 +0000
+++ b/sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm2835-rpi.dtsi Sat May 25 11:48:05 2019 +0000
@@ -1,7 +1,7 @@
#include <dt-bindings/power/raspberrypi-power.h>
/ {
- memory {
+ memory@0 {
device_type = "memory";
reg = <0 0x10000000>;
};
@@ -19,8 +19,6 @@
soc {
firmware: firmware {
compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
- #address-cells = <0>;
- #size-cells = <0>;
mboxes = <&mailbox>;
};
@@ -30,9 +28,9 @@
#power-domain-cells = <1>;
};
- mailbox@7e00b840 {
+ vchiq: mailbox@7e00b840 {
compatible = "brcm,bcm2835-vchiq";
- reg = <0x7e00b840 0xf>;
+ reg = <0x7e00b840 0x3c>;
interrupts = <0 2>;
};
};
@@ -87,10 +85,6 @@
power-domains = <&power RPI_POWER_DOMAIN_USB>;
};
-&v3d {
- power-domains = <&power RPI_POWER_DOMAIN_V3D>;
-};
-
&hdmi {
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
status = "okay";
diff -r c73b964d8f17 -r 45761ccdf521 sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm283x.dtsi
--- a/sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm283x.dtsi Sat May 25 11:29:13 2019 +0000
+++ b/sys/external/gpl2/dts/dist/arch/arm/boot/dts/bcm283x.dtsi Sat May 25 11:48:05 2019 +0000
@@ -3,6 +3,7 @@
#include <dt-bindings/clock/bcm2835-aux.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
/* firmware-provided startup stubs live here, where the secondary CPUs are
* spinning.
@@ -120,9 +121,18 @@
#interrupt-cells = <2>;
};
- watchdog@7e100000 {
- compatible = "brcm,bcm2835-pm-wdt";
- reg = <0x7e100000 0x28>;
+ pm: watchdog@7e100000 {
+ compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+ #power-domain-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x7e100000 0x114>,
+ <0x7e00a000 0x24>;
+ clocks = <&clocks BCM2835_CLOCK_V3D>,
+ <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+ <&clocks BCM2835_CLOCK_H264>,
+ <&clocks BCM2835_CLOCK_ISP>;
+ clock-names = "v3d", "peri_image", "h264", "isp";
+ system-power-controller;
};
clocks: cprman@7e101000 {
@@ -633,6 +643,7 @@
compatible = "brcm,bcm2835-v3d";
reg = <0x7ec00000 0x1000>;
interrupts = <1 10>;
+ power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
status = "disabled";
};
diff -r c73b964d8f17 -r 45761ccdf521 sys/external/gpl2/dts/dist/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi
--- a/sys/external/gpl2/dts/dist/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi Sat May 25 11:29:13 2019 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-&tlmm_pinmux {
- card_detect: card-detect {
- mux {
- pins = "gpio26";
- function = "gpio";
- bias-disable;
- };
- };
-
- pcie_pins: pcie-pinmux {
- mux {
- pins = "gpio27";
- function = "gpio";
- };
- conf {
- pins = "gpio27";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- user_leds: user-leds {
- mux {
- pins = "gpio3", "gpio7", "gpio10", "gpio11";
- function = "gpio";
- };
-
- conf {
- pins = "gpio3", "gpio7", "gpio10", "gpio11";
- function = "gpio";
- output-low;
- };
- };
-
- magneto_pins: magneto-pins {
- mux {
- pins = "gpio31", "gpio48";
- function = "gpio";
- bias-disable;
- };
- };
-};
-
-&pm8921_mpps {
- mpp_leds: mpp-leds {
- pinconf {
- pins = "mpp7", "mpp8";
- function = "digital";
- output-low;
- };
- };
-};
diff -r c73b964d8f17 -r 45761ccdf521 sys/external/gpl2/dts/dist/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
--- a/sys/external/gpl2/dts/dist/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts Sat May 25 11:29:13 2019 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,415 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include "qcom-apq8064-arrow-sd-600eval-pins.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-
-/ {
- model = "Arrow Electronics, APQ8064 SD_600eval";
- compatible = "arrow,sd_600eval", "qcom,apq8064";
-
- aliases {
- serial0 = &gsbi7_serial;
- serial1 = &gsbi1_serial;
- i2c0 = &gsbi2_i2c;
- i2c1 = &gsbi3_i2c;
- i2c2 = &gsbi4_i2c;
- i2c3 = &gsbi7_i2c;
- spi0 = &gsbi5_spi;
- };
-
- regulators {
- compatible = "simple-bus";
- vph: regulator-fixed@1 {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <4500000>;
- regulator-max-microvolt = <4500000>;
- regulator-name = "VPH";
- regulator-type = "voltage";
- regulator-boot-on;
- };
-
- /* on board fixed 3.3v supply */
- vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- };
-
- hdmi-out {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con: endpoint {
- remote-endpoint = <&hdmi_out>;
- };
- };
- };
-
- soc {
- rpm@108000 {
- regulators {
- vdd_s1-supply = <&vph>;
- vdd_s2-supply = <&vph>;
- vdd_s3-supply = <&vph>;
- vdd_s4-supply = <&vph>;
- vdd_s5-supply = <&vph>;
- vdd_s6-supply = <&vph>;
- vdd_s7-supply = <&vph>;
- vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
- vdd_l3_l15_l17-supply = <&vph>;
- vdd_l4_l14-supply = <&vph>;
- vdd_l5_l8_l16-supply = <&vph>;
- vdd_l6_l7-supply = <&vph>;
- vdd_l9_l11-supply = <&vph>;
- vdd_l10_l22-supply = <&vph>;
- vdd_l21_l23_l29-supply = <&vph>;
- vdd_l24-supply = <&pm8921_s1>;
- vdd_l25-supply = <&pm8921_s1>;
- vdd_l26-supply = <&pm8921_s7>;
- vdd_l27-supply = <&pm8921_s7>;
- vdd_l28-supply = <&pm8921_s7>;
- vin_lvs1_3_6-supply = <&pm8921_s4>;
- vin_lvs2-supply = <&pm8921_s1>;
- vin_lvs4_5_7-supply = <&pm8921_s4>;
-
- s1 {
- regulator-always-on;
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- qcom,switch-mode-frequency = <3200000>;
- bias-pull-down;
- };
-
- s2 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- regulator-always-on;
- };
-
- s3 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- qcom,switch-mode-frequency = <4800000>;
- };
-
- s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,switch-mode-frequency = <1600000>;
- qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
- bias-pull-down;
- regulator-always-on;
- };
-
- s7 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- qcom,switch-mode-frequency = <3200000>;
- };
-
- l3 {
- regulator-min-microvolt = <3050000>;
- regulator-max-microvolt = <3300000>;
- bias-pull-down;
- };
-
- l4 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1800000>;
- bias-pull-down;
- };
-
- l5 {
- regulator-min-microvolt = <2750000>;
- regulator-max-microvolt = <3000000>;
- bias-pull-down;
- regulator-boot-on;
- regulator-always-on;
- };
-
- l6 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- bias-pull-down;
- };
-
- /**
- * 1.8v required on LS expansion
- * for mezzanine boards
- */
- l15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- l23 {
Home |
Main Index |
Thread Index |
Old Index