Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/netbsd-9]: src/sys/dev/ic Pull up following revision(s) (requested by ts...
details: https://anonhg.NetBSD.org/src/rev/f070501310ac
branches: netbsd-9
changeset: 1001759:f070501310ac
user: martin <martin%NetBSD.org@localhost>
date: Mon May 18 17:52:22 2020 +0000
description:
Pull up following revision(s) (requested by tsutsui in ticket #908):
sys/dev/ic/stivar.h: revision 1.10
sys/dev/ic/sti.c: revision 1.21
sys/arch/hp300/dev/sti_sgc.c: revision 1.3
Add bitmap access ops support for EVRX framebuffer on HP9000/425e.
8bpp Xorg wsfb server and mlterm-wscons (formerly mlterm-fb) work.
No particular comment on port-hp300@ and port-hppa@:
https://mail-index.netbsd.org/port-hp300/2020/05/02/msg000170.html
Special thanks to Miod Vallat, for his advice about HP-UX implementation
and binutils patches to disassemble old HP-UX a.out-hp300hpux binaries
(and also contributing his 425e back in 2014).
diffstat:
sys/arch/hp300/dev/sti_sgc.c | 350 ++++++++++++++++++++++++++++++++++++++++--
sys/dev/ic/sti.c | 21 +-
sys/dev/ic/stivar.h | 5 +-
3 files changed, 346 insertions(+), 30 deletions(-)
diffs (truncated from 493 to 300 lines):
diff -r a262f633a2cd -r f070501310ac sys/arch/hp300/dev/sti_sgc.c
--- a/sys/arch/hp300/dev/sti_sgc.c Wed May 13 18:17:31 2020 +0000
+++ b/sys/arch/hp300/dev/sti_sgc.c Mon May 18 17:52:22 2020 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: sti_sgc.c,v 1.2 2014/04/20 04:12:54 tsutsui Exp $ */
+/* $NetBSD: sti_sgc.c,v 1.2.34.1 2020/05/18 17:52:22 martin Exp $ */
/* $OpenBSD: sti_sgc.c,v 1.14 2007/05/26 00:36:03 krw Exp $ */
/*
@@ -27,7 +27,7 @@
*
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: sti_sgc.c,v 1.2 2014/04/20 04:12:54 tsutsui Exp $");
+__KERNEL_RCSID(0, "$NetBSD: sti_sgc.c,v 1.2.34.1 2020/05/18 17:52:22 martin Exp $");
#include <sys/param.h>
#include <sys/device.h>
@@ -35,6 +35,7 @@
#include <uvm/uvm_extern.h>
+#include <dev/wscons/wsconsio.h>
#include <dev/wscons/wsdisplayvar.h>
#include <dev/ic/stireg.h>
@@ -44,6 +45,36 @@
#include <hp300/dev/sti_sgcvar.h>
#include <machine/autoconf.h>
+struct sti_sgc_softc {
+ struct sti_softc sc_sti;
+
+ paddr_t sc_bitmap;
+ bus_space_tag_t sc_bst;
+ bus_space_handle_t sc_ramdach;
+};
+
+/*
+ * 425e EVRX specific hardware
+ */
+#define STI_EVRX_RAMDACOFFSET 0x060000
+#define STI_EVRX_RAMDACSIZE 0x000800
+#define STI_EVRX_FBOFFSET 0x200000
+
+#define EVRX_BT458_ADDR (0x200 + 2)
+#define EVRX_BT458_CMAP (0x204 + 2)
+#define EVRX_BT458_CTRL (0x208 + 2)
+#define EVRX_BT458_OMAP (0x20C + 2)
+
+/* from HP-UX /usr/lib/libddevrx.a */
+#define EVRX_MAGIC00 0x600
+#define EVRX_MAGIC04 0x604
+#define EVRX_MAGIC08 0x608
+#define EVRX_MAGIC0C 0x60c
+#define EVRX_MAGIC10 0x610
+#define EVRX_MAGIC10_BSY 0x00010000
+#define EVRX_MAGIC18 0x618
+#define EVRX_MAGIC1C 0x61c
+
static int sticonslot = -1;
static struct sti_rom sticn_rom;
static struct sti_screen sticn_scr;
@@ -54,9 +85,25 @@
static int sti_sgc_probe(bus_space_tag_t, int);
-CFATTACH_DECL_NEW(sti_sgc, sizeof(struct sti_softc),
+CFATTACH_DECL_NEW(sti_sgc, sizeof(struct sti_sgc_softc),
sti_sgc_match, sti_sgc_attach, NULL, NULL);
+/* 425e EVRX specific access functions */
+static int sti_evrx_setcmap(struct sti_sgc_softc *, struct wsdisplay_cmap *);
+static void sti_evrx_resetramdac(struct sti_sgc_softc *);
+static void sti_evrx_resetcmap(struct sti_sgc_softc *);
+static int sti_evrx_ioctl(void *, void *, u_long, void *, int, struct lwp *);
+static paddr_t sti_evrx_mmap(void *, void *, off_t, int);
+
+static const struct wsdisplay_accessops sti_evrx_accessops = {
+ sti_evrx_ioctl,
+ sti_evrx_mmap,
+ sti_alloc_screen,
+ sti_free_screen,
+ sti_show_screen,
+ sti_load_font
+};
+
static int
sti_sgc_match(device_t parent, struct cfdata *cf, void *aux)
{
@@ -75,24 +122,31 @@
static void
sti_sgc_attach(device_t parent, device_t self, void *aux)
{
- struct sti_softc *sc = device_private(self);
+ struct sti_sgc_softc *sc = device_private(self);
+ struct sti_softc *ssc = &sc->sc_sti;
struct sgc_attach_args *saa = aux;
+ struct sti_screen *scr;
bus_space_handle_t romh;
bus_addr_t base;
+ struct wsemuldisplaydev_attach_args waa;
u_int romend;
+ struct sti_dd *rom_dd;
+ uint32_t grid0;
int i;
- sc->sc_dev = self;
+ ssc->sc_dev = self;
+ base = (bus_addr_t)sgc_slottopa(saa->saa_slot);
if (saa->saa_slot == sticonslot) {
- sc->sc_flags |= STI_CONSOLE | STI_ATTACHED;
- sc->sc_rom = &sticn_rom;
- sc->sc_scr = &sticn_scr;
- memcpy(sc->bases, sticn_bases, sizeof(sc->bases));
+ ssc->sc_flags |= STI_CONSOLE | STI_ATTACHED;
+ ssc->sc_rom = &sticn_rom;
+ ssc->sc_rom->rom_softc = ssc;
+ ssc->sc_scr = &sticn_scr;
+ ssc->sc_scr->scr_rom = ssc->sc_rom;
+ memcpy(ssc->bases, sticn_bases, sizeof(ssc->bases));
- sti_describe(sc);
+ sti_describe(ssc);
} else {
- base = (bus_addr_t)sgc_slottopa(saa->saa_slot);
if (bus_space_map(saa->saa_iot, base, PAGE_SIZE, 0, &romh)) {
aprint_error(": can't map ROM");
return;
@@ -109,22 +163,70 @@
return;
}
- sc->bases[0] = romh;
+ ssc->bases[0] = romh;
for (i = 0; i < STI_REGION_MAX; i++)
- sc->bases[i] = base;
+ ssc->bases[i] = base;
- if (sti_attach_common(sc, saa->saa_iot, saa->saa_iot, romh,
+ if (sti_attach_common(ssc, saa->saa_iot, saa->saa_iot, romh,
STI_CODEBASE_ALT) != 0)
return;
}
- /*
- * Note on 425e sti(4) framebuffer bitmap memory can be accessed at
- * (sgc_slottopa(saa->saa_slot) + 0x200000)
- * but the mmap function to map bitmap display is not provided yet.
- */
+ /* Identify the board model by dd_grid */
+ rom_dd = &ssc->sc_rom->rom_dd;
+ grid0 = rom_dd->dd_grid[0];
+ scr = ssc->sc_scr;
+
+ switch (grid0) {
+ case STI_DD_EVRX:
+ /*
+ * 425e on-board EVRX framebuffer.
+ * bitmap memory can be accessed at offset +0x200000.
+ */
+ sc->sc_bitmap = base + STI_EVRX_FBOFFSET;
+
+ /*
+ * Bt458 RAMDAC can be accessed at offset +0x60200 and
+ * unknown control registers are around +0x60600.
+ */
+ sc->sc_bst = saa->saa_iot;
+ if (bus_space_map(sc->sc_bst, base + STI_EVRX_RAMDACOFFSET,
+ STI_EVRX_RAMDACSIZE, 0, &sc->sc_ramdach)) {
+ aprint_error_dev(self, "can't map RAMDAC\n");
+ return;
+ }
+
+ aprint_normal_dev(self, "Enable mmap support\n");
- sti_end_attach(sc);
+ /*
+ * initialize Bt458 RAMDAC and preserve initial color map
+ */
+ sti_evrx_resetramdac(sc);
+ sti_evrx_resetcmap(sc);
+
+ scr->scr_wsmode = WSDISPLAYIO_MODE_EMUL;
+ waa.console = ssc->sc_flags & STI_CONSOLE ? 1 : 0;
+ waa.scrdata = &scr->scr_screenlist;
+ waa.accessops = &sti_evrx_accessops;
+ waa.accesscookie = scr;
+
+ config_found(ssc->sc_dev, &waa, wsemuldisplaydevprint);
+ break;
+
+ case STI_DD_CRX:
+ /*
+ * HP A1659A CRX on some 425t variants.
+ * Not investigated yet; needs to check HP-UX libddgcrx.a etc.
+ */
+ /* FALLTHROUGH */
+ default:
+ /*
+ * Unsupported variants.
+ * Use default common sti(4) attachment (no bitmap support).
+ */
+ sti_end_attach(ssc);
+ break;
+ }
}
static int
@@ -153,6 +255,214 @@
return 1;
}
+static int
+sti_evrx_setcmap(struct sti_sgc_softc *sc, struct wsdisplay_cmap *p)
+{
+ struct sti_softc *ssc = &sc->sc_sti;
+ struct sti_screen *scr = ssc->sc_scr;
+ bus_space_tag_t bst = sc->sc_bst;
+ bus_space_handle_t bsh = sc->sc_ramdach;
+ uint8_t r[STI_NCMAP], g[STI_NCMAP], b[STI_NCMAP];
+ u_int index, count;
+ int i, error;
+
+ index = p->index;
+ count = p->count;
+ if (index >= STI_NCMAP || count > STI_NCMAP - index)
+ return EINVAL;
+
+ error = copyin(p->red, &r[index], count);
+ if (error)
+ return error;
+ error = copyin(p->green, &g[index], count);
+ if (error)
+ return error;
+ error = copyin(p->blue, &b[index], count);
+ if (error)
+ return error;
+
+ memcpy(&scr->scr_rcmap[index], &r[index], count);
+ memcpy(&scr->scr_gcmap[index], &g[index], count);
+ memcpy(&scr->scr_bcmap[index], &b[index], count);
+
+ /* magic setup from HP-UX */
+ bus_space_write_4(bst, bsh, EVRX_MAGIC08, 0x00000001);
+ bus_space_write_4(bst, bsh, EVRX_MAGIC00, 0x00000001);
+ for (i = index; i < index + count; i++) {
+ /* this is what HP-UX woodDownloadCmap() does */
+ while ((bus_space_read_4(bst, bsh, EVRX_MAGIC10) &
+ EVRX_MAGIC10_BSY) != 0)
+ continue;
+ bus_space_write_1(bst, bsh, EVRX_BT458_ADDR, i);
+ bus_space_write_1(bst, bsh, EVRX_BT458_CMAP, scr->scr_rcmap[i]);
+ bus_space_write_1(bst, bsh, EVRX_BT458_CMAP, scr->scr_gcmap[i]);
+ bus_space_write_4(bst, bsh, EVRX_MAGIC10, scr->scr_bcmap[i]);
+ }
+ return 0;
+}
+
+static void
+sti_evrx_resetramdac(struct sti_sgc_softc *sc)
+{
+ bus_space_tag_t bst = sc->sc_bst;
+ bus_space_handle_t bsh = sc->sc_ramdach;
+#if 0
+ int i;
+#endif
+
+ /*
+ * Initialize the Bt458. When we write to control registers,
+ * the address is not incremented automatically. So we specify
+ * it ourselves for each control register.
+ */
+
+ /* all planes will be read */
+ bus_space_write_1(bst, bsh, EVRX_BT458_ADDR, 0x04);
+ bus_space_write_1(bst, bsh, EVRX_BT458_CTRL, 0xff);
+
+ /* all planes have non-blink */
+ bus_space_write_1(bst, bsh, EVRX_BT458_ADDR, 0x05);
+ bus_space_write_1(bst, bsh, EVRX_BT458_CTRL, 0x00);
+
+ /* pallete enabled, ovly plane disabled */
+ bus_space_write_1(bst, bsh, EVRX_BT458_ADDR, 0x06);
+ bus_space_write_1(bst, bsh, EVRX_BT458_CTRL, 0x40);
+
+ /* no test mode */
+ bus_space_write_1(bst, bsh, EVRX_BT458_ADDR, 0x07);
+ bus_space_write_1(bst, bsh, EVRX_BT458_CTRL, 0x00);
+
+ /* magic initialization from HP-UX woodInitializeHardware() */
+ bus_space_write_4(bst, bsh, EVRX_MAGIC00, 0x00000001);
+ bus_space_write_4(bst, bsh, EVRX_MAGIC04, 0x00000001);
+ bus_space_write_4(bst, bsh, EVRX_MAGIC08, 0x00000001);
+ bus_space_write_4(bst, bsh, EVRX_MAGIC0C, 0x00000001);
+ bus_space_write_4(bst, bsh, EVRX_MAGIC18, 0xFFFFFFFF);
+ bus_space_write_4(bst, bsh, EVRX_MAGIC1C, 0x00000000);
+
+#if 0
Home |
Main Index |
Thread Index |
Old Index