[src/trunk]: src/sys/dev/pci add entry for NetMos NM9900 Octa UART

[ryo <ryo%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/769e02b7acee
branches:  trunk
changeset: 1008900:769e02b7acee
user:      ryo <ryo%NetBSD.org@localhost>
date:      Sun Apr 05 10:43:09 2020 +0000

description:
add entry for NetMos NM9900 Octa UART

notice: On the boards I've obtained, the number on the cable stamp
doesn't match the actual unit number of the attached device.
Cable's 0,1,2,..,7 corresponds to comN+0,2,4,6,1,3,5,7 :-(

diffstat:

 sys/dev/pci/pucdata.c |  14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diffs (35 lines):

diff -r e17cfbfba79b -r 769e02b7acee sys/dev/pci/pucdata.c
--- a/sys/dev/pci/pucdata.c     Sun Apr 05 05:19:24 2020 +0000
+++ b/sys/dev/pci/pucdata.c     Sun Apr 05 10:43:09 2020 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: pucdata.c,v 1.106 2020/03/24 18:09:07 ryo Exp $        */
+/*     $NetBSD: pucdata.c,v 1.107 2020/04/05 10:43:09 ryo Exp $        */
 
 /*
  * Copyright (c) 1998, 1999 Christopher G. Demetriou.  All rights reserved.
@@ -36,7 +36,7 @@
  */
 
 #include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: pucdata.c,v 1.106 2020/03/24 18:09:07 ryo Exp $");
+__KERNEL_RCSID(0, "$NetBSD: pucdata.c,v 1.107 2020/04/05 10:43:09 ryo Exp $");
 
 #include <sys/param.h>
 #include <sys/systm.h>
@@ -992,6 +992,16 @@
            },
        },
 
+       /* NetMos PCIe NM9900 : 8S */
+       {   "NetMos NM9900 UART 8S",
+           {   PCI_VENDOR_NETMOS, PCI_PRODUCT_NETMOS_NM9900, 0xa000, 0x3002 },
+           {   0xffff, 0xffff,                               0xffff, 0xffff },
+           {
+               { PUC_PORT_TYPE_COM, PCI_BAR0, 0x00, COM_FREQ },
+               { PUC_PORT_TYPE_COM, PCI_BAR3, 0x00, COM_FREQ },
+           },
+       },
+
        /* NetMos PCIe Peripheral Controller :UART part */
        {   "NetMos NM9901 UART",
            {   PCI_VENDOR_NETMOS, PCI_PRODUCT_NETMOS_NM9901, 0xa000, 0x1000 },