[src/trunk]: src/tests/dev/sysmon s/timout/timeout/

[msaitoh <msaitoh%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/76ab0c741dce
branches:  trunk
changeset: 1026732:76ab0c741dce
user:      msaitoh <msaitoh%NetBSD.org@localhost>
date:      Sun Dec 05 08:16:10 2021 +0000

description:
s/timout/timeout/

diffstat:

 sys/arch/amiga/dev/if_qn.c     |  8 ++++----
 sys/dev/ic/ncr53c9x.c          |  6 +++---
 tests/dev/sysmon/t_swsensor.sh |  4 ++--
 3 files changed, 9 insertions(+), 9 deletions(-)

diffs (79 lines):

diff -r f0fbc1ac993e -r 76ab0c741dce sys/arch/amiga/dev/if_qn.c
--- a/sys/arch/amiga/dev/if_qn.c        Sun Dec 05 08:13:12 2021 +0000
+++ b/sys/arch/amiga/dev/if_qn.c        Sun Dec 05 08:16:10 2021 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: if_qn.c,v 1.49 2020/01/29 05:23:16 thorpej Exp $ */
+/*     $NetBSD: if_qn.c,v 1.50 2021/12/05 08:16:10 msaitoh Exp $ */
 
 /*
  * Copyright (c) 1995 Mika Kortelainen
@@ -66,7 +66,7 @@
  */
 
 #include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: if_qn.c,v 1.49 2020/01/29 05:23:16 thorpej Exp $");
+__KERNEL_RCSID(0, "$NetBSD: if_qn.c,v 1.50 2021/12/05 08:16:10 msaitoh Exp $");
 
 #include "qn.h"
 #if NQN > 0
@@ -416,13 +416,13 @@
        /* Wait for the packet to really leave. */
        while (!(*sc->nic_t_status & T_TMT_OK) && --timout) {
                if ((timout % 10000) == 0)
-                       log(LOG_INFO, "qn: timout...\n");
+                       log(LOG_INFO, "qn: timeout...\n");
        }
 
        if (timout == 0)
                /* Maybe we should try to recover from this one? */
                /* But now, let's just fall thru and hope the best... */
-               log(LOG_INFO, "qn: transmit timout (fatal?)\n");
+               log(LOG_INFO, "qn: transmit timeout (fatal?)\n");
 
        sc->transmit_pending = 1;
        *sc->nic_t_mask = INT_TMT_OK | INT_SIXTEEN_COL;
diff -r f0fbc1ac993e -r 76ab0c741dce sys/dev/ic/ncr53c9x.c
--- a/sys/dev/ic/ncr53c9x.c     Sun Dec 05 08:13:12 2021 +0000
+++ b/sys/dev/ic/ncr53c9x.c     Sun Dec 05 08:16:10 2021 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: ncr53c9x.c,v 1.155 2021/08/07 16:19:12 thorpej Exp $   */
+/*     $NetBSD: ncr53c9x.c,v 1.156 2021/12/05 08:16:10 msaitoh Exp $   */
 
 /*-
  * Copyright (c) 1998, 2002 The NetBSD Foundation, Inc.
@@ -70,7 +70,7 @@
  */
 
 #include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: ncr53c9x.c,v 1.155 2021/08/07 16:19:12 thorpej Exp $");
+__KERNEL_RCSID(0, "$NetBSD: ncr53c9x.c,v 1.156 2021/12/05 08:16:10 msaitoh Exp $");
 
 #include <sys/param.h>
 #include <sys/systm.h>
@@ -244,7 +244,7 @@
         * The recommended timeout is 250ms. This register is loaded
         * with a value calculated as follows, from the docs:
         *
-        *              (timout period) x (CLK frequency)
+        *              (timeout period) x (CLK frequency)
         *      reg = -------------------------------------
         *               8192 x (Clock Conversion Factor)
         *
diff -r f0fbc1ac993e -r 76ab0c741dce tests/dev/sysmon/t_swsensor.sh
--- a/tests/dev/sysmon/t_swsensor.sh    Sun Dec 05 08:13:12 2021 +0000
+++ b/tests/dev/sysmon/t_swsensor.sh    Sun Dec 05 08:16:10 2021 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: t_swsensor.sh,v 1.12 2021/06/13 14:45:36 riastradh Exp $
+# $NetBSD: t_swsensor.sh,v 1.13 2021/12/05 08:16:10 msaitoh Exp $
 
 get_sensor_info() {
        rump.envstat -x | \
@@ -134,7 +134,7 @@
        # (use $(( ... )) since the timeout is displayed in hex!)
        rump.envstat -c env0.conf
        if [ $(( $( get_sensor_key refresh-timeout ) )) -ne 2 ] ; then
-               atf_fail "1: Could not set refresh-timout to 2s"
+               atf_fail "1: Could not set refresh-timeout to 2s"
        fi
 
        # Step 2 - verify that we can read sensor's value