[src/netbsd-9]: src/sys/dev/pci Pull up following revision(s) (requested by b...

[martin <martin%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/191fcf3fd714
branches:  netbsd-9
changeset: 366229:191fcf3fd714
user:      martin <martin%NetBSD.org@localhost>
date:      Thu May 19 16:24:20 2022 +0000

description:
Pull up following revision(s) (requested by buhrow in ticket #1456):

        sys/dev/pci/if_bge.c: revision 1.353

For chips which contain an ASF/IPMI firmware, instruct the chip to shut
the host ASF firmware down when attaching the device so the IPMI BMC
can use the same physical port even when NetBSD doesn't have a
network configuration on the device.
By contrast, when the device gets a network configuration assigned to
it and bge_init() is called, the host ASF firmware is brought up so
both NetBSD and the IPMI BMc can use the same physical port.

This now matches FreeBSD behavior, as well as  behavior from NetBSD-5.2.

Tested on a Sunfire X2200-M2 system with the following chip:

bge1 at pci7 dev 4 function 1: Broadcom BCM5715 Gigabit Ethernet
bge1: interrupting at ioapic0 pin 11
bge1: HW config 000000d4, 00000014, 00000000, 00000000 00000000
bge1: ASIC BCM5715 A3 (0x9003), Ethernet address 00:1e:68:XX:XX:XX
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto

diffstat:

 sys/dev/pci/if_bge.c |  10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diffs (38 lines):

diff -r 9cafce82bba6 -r 191fcf3fd714 sys/dev/pci/if_bge.c
--- a/sys/dev/pci/if_bge.c      Tue May 17 13:49:43 2022 +0000
+++ b/sys/dev/pci/if_bge.c      Thu May 19 16:24:20 2022 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: if_bge.c,v 1.335.2.1 2019/11/27 11:08:24 martin Exp $  */
+/*     $NetBSD: if_bge.c,v 1.335.2.2 2022/05/19 16:24:20 martin Exp $  */
 
 /*
  * Copyright (c) 2001 Wind River Systems
@@ -79,7 +79,7 @@
  */
 
 #include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: if_bge.c,v 1.335.2.1 2019/11/27 11:08:24 martin Exp $");
+__KERNEL_RCSID(0, "$NetBSD: if_bge.c,v 1.335.2.2 2022/05/19 16:24:20 martin Exp $");
 
 #include <sys/param.h>
 #include <sys/systm.h>
@@ -3646,7 +3646,7 @@
        BGE_SETBIT_FLUSH(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_AUTO_EEPROM);
 
        bge_stop_fw(sc);
-       bge_sig_pre_reset(sc, BGE_RESET_START);
+       bge_sig_pre_reset(sc, BGE_RESET_SHUTDOWN);
        if (bge_reset(sc))
                aprint_error_dev(sc->bge_dev, "chip reset failed\n");
 
@@ -3680,8 +3680,8 @@
            "HW config %08x, %08x, %08x, %08x %08x\n",
            hwcfg, hwcfg2, hwcfg3, hwcfg4, hwcfg5);
 
-       bge_sig_legacy(sc, BGE_RESET_START);
-       bge_sig_post_reset(sc, BGE_RESET_START);
+       bge_sig_legacy(sc, BGE_RESET_SHUTDOWN);
+       bge_sig_post_reset(sc, BGE_RESET_SHUTDOWN);
 
        if (bge_chipinit(sc)) {
                aprint_error_dev(sc->bge_dev, "chip initialization failed\n");