phil
Tue Sep 26 16:16:05 EDT 1995
Update of /a/cvsroot/src/sys/arch/pc532/conf
In directory pain.lcs.mit.edu:/b/tmp/cvs-serv15084/conf

Modified Files:
	INSTALL KLONDIKE STEELHEAD files.pc532 
Added Files:
	DEFAULT 
Log Message:
Major update:  Many changes from Matthias Pfaller.
* conf/DEFAULT: new file, default install kernel
* conf/INSTALL: +MSDOSFS, +NO_INLINE_SPLX, +RD_SIZE=2mb, +scn4/5
* conf/KLONDIKE: cosmetic changes
* conf/STEELHEAD: cosmetic changes
* conf/files.pc532: rd got a file of it's own
* dev/lpt.c: changes to support lower interrupt latency, packet input/output
  is now done at spl0
* dev/ncr.c: changes to support the most recent atari version of the ncr5380
  driver
* dev/ncr5380.c, dev/ncr5380reg.h: upgraded to most recent atari version,
  memcpy -> bcopy.
* dev/rd.c: ramdisk driver
* dev/scn.c: by patching scndefaultrate, the kernel's default baud rate can
  be changed with gdb
* include/psl.h: struct iv now protected by !LOCORE && _KERNEL
  inlining of splx can be prevented with new kernel option NO_INLINE_SPLX
  splx_di is like splx but leaves processor interrupts disabled
* pc532/autoconf.c: cosmetic changes
* pc532/conf.c: with rd entries
* pc532/intr.c: changes to support splx_di
* pc532/locore.s: ramdisk is no longer initialized
  not splx, but rett is now used to reenable CPU interrupts when leaving the
  interrupt service routine. This is necessary to prevent recursive interrupts.
* pc532/sys_machdep.c: memcpy -> bcopy
* pc532/mem.c: moved ramdisk to dev/rd.c
* stand/Makefile: boot is now loaded at 0x3eb800 instead of 0x363800
  Use current form of libsa and libkern.
* stand/inflate.c: emit twiddle every 8k and not every 1k
* stand/rd.c: ramdisk starts at 0x288000


phil
Tue Sep 26 16:16:19 EDT 1995
Update of /a/cvsroot/src/sys/arch/pc532/dev
In directory pain.lcs.mit.edu:/b/tmp/cvs-serv15084/dev

Modified Files:
	lpt.c ncr.c ncr5380.c ncr5380reg.h scn.c 
Added Files:
	rd.c 
Log Message:
Major update:  Many changes from Matthias Pfaller.
* conf/DEFAULT: new file, default install kernel
* conf/INSTALL: +MSDOSFS, +NO_INLINE_SPLX, +RD_SIZE=2mb, +scn4/5
* conf/KLONDIKE: cosmetic changes
* conf/STEELHEAD: cosmetic changes
* conf/files.pc532: rd got a file of it's own
* dev/lpt.c: changes to support lower interrupt latency, packet input/output
  is now done at spl0
* dev/ncr.c: changes to support the most recent atari version of the ncr5380
  driver
* dev/ncr5380.c, dev/ncr5380reg.h: upgraded to most recent atari version,
  memcpy -> bcopy.
* dev/rd.c: ramdisk driver
* dev/scn.c: by patching scndefaultrate, the kernel's default baud rate can
  be changed with gdb
* include/psl.h: struct iv now protected by !LOCORE && _KERNEL
  inlining of splx can be prevented with new kernel option NO_INLINE_SPLX
  splx_di is like splx but leaves processor interrupts disabled
* pc532/autoconf.c: cosmetic changes
* pc532/conf.c: with rd entries
* pc532/intr.c: changes to support splx_di
* pc532/locore.s: ramdisk is no longer initialized
  not splx, but rett is now used to reenable CPU interrupts when leaving the
  interrupt service routine. This is necessary to prevent recursive interrupts.
* pc532/sys_machdep.c: memcpy -> bcopy
* pc532/mem.c: moved ramdisk to dev/rd.c
* stand/Makefile: boot is now loaded at 0x3eb800 instead of 0x363800
  Use current form of libsa and libkern.
* stand/inflate.c: emit twiddle every 8k and not every 1k
* stand/rd.c: ramdisk starts at 0x288000


phil
Tue Sep 26 16:16:22 EDT 1995
Update of /a/cvsroot/src/sys/arch/pc532/include
In directory pain.lcs.mit.edu:/b/tmp/cvs-serv15084/include

Modified Files:
	psl.h 
Log Message:
Major update:  Many changes from Matthias Pfaller.
* conf/DEFAULT: new file, default install kernel
* conf/INSTALL: +MSDOSFS, +NO_INLINE_SPLX, +RD_SIZE=2mb, +scn4/5
* conf/KLONDIKE: cosmetic changes
* conf/STEELHEAD: cosmetic changes
* conf/files.pc532: rd got a file of it's own
* dev/lpt.c: changes to support lower interrupt latency, packet input/output
  is now done at spl0
* dev/ncr.c: changes to support the most recent atari version of the ncr5380
  driver
* dev/ncr5380.c, dev/ncr5380reg.h: upgraded to most recent atari version,
  memcpy -> bcopy.
* dev/rd.c: ramdisk driver
* dev/scn.c: by patching scndefaultrate, the kernel's default baud rate can
  be changed with gdb
* include/psl.h: struct iv now protected by !LOCORE && _KERNEL
  inlining of splx can be prevented with new kernel option NO_INLINE_SPLX
  splx_di is like splx but leaves processor interrupts disabled
* pc532/autoconf.c: cosmetic changes
* pc532/conf.c: with rd entries
* pc532/intr.c: changes to support splx_di
* pc532/locore.s: ramdisk is no longer initialized
  not splx, but rett is now used to reenable CPU interrupts when leaving the
  interrupt service routine. This is necessary to prevent recursive interrupts.
* pc532/sys_machdep.c: memcpy -> bcopy
* pc532/mem.c: moved ramdisk to dev/rd.c
* stand/Makefile: boot is now loaded at 0x3eb800 instead of 0x363800
  Use current form of libsa and libkern.
* stand/inflate.c: emit twiddle every 8k and not every 1k
* stand/rd.c: ramdisk starts at 0x288000


phil
Tue Sep 26 16:16:35 EDT 1995
Update of /a/cvsroot/src/sys/arch/pc532/pc532
In directory pain.lcs.mit.edu:/b/tmp/cvs-serv15084/pc532

Modified Files:
	autoconf.c conf.c intr.c locore.s mem.c process_machdep.c 
	sys_machdep.c 
Log Message:
Major update:  Many changes from Matthias Pfaller.
* conf/DEFAULT: new file, default install kernel
* conf/INSTALL: +MSDOSFS, +NO_INLINE_SPLX, +RD_SIZE=2mb, +scn4/5
* conf/KLONDIKE: cosmetic changes
* conf/STEELHEAD: cosmetic changes
* conf/files.pc532: rd got a file of it's own
* dev/lpt.c: changes to support lower interrupt latency, packet input/output
  is now done at spl0
* dev/ncr.c: changes to support the most recent atari version of the ncr5380
  driver
* dev/ncr5380.c, dev/ncr5380reg.h: upgraded to most recent atari version,
  memcpy -> bcopy.
* dev/rd.c: ramdisk driver
* dev/scn.c: by patching scndefaultrate, the kernel's default baud rate can
  be changed with gdb
* include/psl.h: struct iv now protected by !LOCORE && _KERNEL
  inlining of splx can be prevented with new kernel option NO_INLINE_SPLX
  splx_di is like splx but leaves processor interrupts disabled
* pc532/autoconf.c: cosmetic changes
* pc532/conf.c: with rd entries
* pc532/intr.c: changes to support splx_di
* pc532/locore.s: ramdisk is no longer initialized
  not splx, but rett is now used to reenable CPU interrupts when leaving the
  interrupt service routine. This is necessary to prevent recursive interrupts.
* pc532/sys_machdep.c: memcpy -> bcopy
* pc532/mem.c: moved ramdisk to dev/rd.c
* stand/Makefile: boot is now loaded at 0x3eb800 instead of 0x363800
  Use current form of libsa and libkern.
* stand/inflate.c: emit twiddle every 8k and not every 1k
* stand/rd.c: ramdisk starts at 0x288000


phil
Tue Sep 26 16:16:41 EDT 1995
Update of /a/cvsroot/src/sys/arch/pc532/stand
In directory pain.lcs.mit.edu:/b/tmp/cvs-serv15084/stand

Modified Files:
	Makefile inflate.c rd.c 
Log Message:
Major update:  Many changes from Matthias Pfaller.
* conf/DEFAULT: new file, default install kernel
* conf/INSTALL: +MSDOSFS, +NO_INLINE_SPLX, +RD_SIZE=2mb, +scn4/5
* conf/KLONDIKE: cosmetic changes
* conf/STEELHEAD: cosmetic changes
* conf/files.pc532: rd got a file of it's own
* dev/lpt.c: changes to support lower interrupt latency, packet input/output
  is now done at spl0
* dev/ncr.c: changes to support the most recent atari version of the ncr5380
  driver
* dev/ncr5380.c, dev/ncr5380reg.h: upgraded to most recent atari version,
  memcpy -> bcopy.
* dev/rd.c: ramdisk driver
* dev/scn.c: by patching scndefaultrate, the kernel's default baud rate can
  be changed with gdb
* include/psl.h: struct iv now protected by !LOCORE && _KERNEL
  inlining of splx can be prevented with new kernel option NO_INLINE_SPLX
  splx_di is like splx but leaves processor interrupts disabled
* pc532/autoconf.c: cosmetic changes
* pc532/conf.c: with rd entries
* pc532/intr.c: changes to support splx_di
* pc532/locore.s: ramdisk is no longer initialized
  not splx, but rett is now used to reenable CPU interrupts when leaving the
  interrupt service routine. This is necessary to prevent recursive interrupts.
* pc532/sys_machdep.c: memcpy -> bcopy
* pc532/mem.c: moved ramdisk to dev/rd.c
* stand/Makefile: boot is now loaded at 0x3eb800 instead of 0x363800
  Use current form of libsa and libkern.
* stand/inflate.c: emit twiddle every 8k and not every 1k
* stand/rd.c: ramdisk starts at 0x288000