is
Thu May  9 16:30:56 EDT 1996
Update of /a/cvsroot/src/sys/arch/amiga/amiga
In directory pain.lcs.mit.edu:/a/tmp/cvs-serv5330/amiga

Modified Files:
	amiga_init.c autoconf.c genassym.c locore.s machdep.c pmap.c 
	swapgeneric.c trap.c vectors.s 
Added Files:
	drcustom.h 
Log Message:
First part of M68060 and DraCo support. 
  
* for the M68060 part: store buffer and branch target cache aren't
  enabled yet (this needs cleanup of lots of locore.s code which is a
  maze of little passages, all a little different) (and it wasn't yet
  tested in an accellerated Amiga, only in the DraCo).

  I've included a workaround for 2 of the CPU bugs in chips with Masks
  1F43G and earlier, but didn't bother to deal with the can of worms
  in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more
  reported at kernel startup time, or at least mention it (or the mask
  revision, if available) when reporting problems.

* for the DraCo: only machines with a CIA timer. 

  I assigned machine id 32000+nn (0x7Dnn), where n is the machine
  readable Quicklogic custom chip revision (also printed at boot
  time).  "Guaranteed to work" up to rev. 3, newer DraCo's aren't
  guaranteed to have any CIA (we don't have a driver for the new timer
  yet).

  Supported are:
    
  - MF-II keyboards on the native interface and A3000 keyboards via
    the CIA.
  - builtin SCSI interface (yet another instance of siop)
  - CIA timer.
  - Zorro II devices which don't do DMA (don't get mapped to Zorro II
    address space in the DraCo)
  - "local bus" devices which are autoconfigured by the boot rom
    (should be all); only an Altais driver is there (looks like a Retina Z3)

  Not yet supported are:

  - native timer of newer machines.
  - Real Time Clock.
  - serial, parallel + floppy on the SuperIO chip (that is also: no mouse)

  XXX You need an enhanced boot loader, which will committed in a few days.

  XXX std.draco should and will go away.



is
Thu May  9 16:31:05 EDT 1996
Update of /a/cvsroot/src/sys/arch/amiga/conf
In directory pain.lcs.mit.edu:/a/tmp/cvs-serv5330/conf

Modified Files:
	Makefile.amiga files.amiga std.amiga 
Added Files:
	DRACO std.draco 
Log Message:
First part of M68060 and DraCo support. 
  
* for the M68060 part: store buffer and branch target cache aren't
  enabled yet (this needs cleanup of lots of locore.s code which is a
  maze of little passages, all a little different) (and it wasn't yet
  tested in an accellerated Amiga, only in the DraCo).

  I've included a workaround for 2 of the CPU bugs in chips with Masks
  1F43G and earlier, but didn't bother to deal with the can of worms
  in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more
  reported at kernel startup time, or at least mention it (or the mask
  revision, if available) when reporting problems.

* for the DraCo: only machines with a CIA timer. 

  I assigned machine id 32000+nn (0x7Dnn), where n is the machine
  readable Quicklogic custom chip revision (also printed at boot
  time).  "Guaranteed to work" up to rev. 3, newer DraCo's aren't
  guaranteed to have any CIA (we don't have a driver for the new timer
  yet).

  Supported are:
    
  - MF-II keyboards on the native interface and A3000 keyboards via
    the CIA.
  - builtin SCSI interface (yet another instance of siop)
  - CIA timer.
  - Zorro II devices which don't do DMA (don't get mapped to Zorro II
    address space in the DraCo)
  - "local bus" devices which are autoconfigured by the boot rom
    (should be all); only an Altais driver is there (looks like a Retina Z3)

  Not yet supported are:

  - native timer of newer machines.
  - Real Time Clock.
  - serial, parallel + floppy on the SuperIO chip (that is also: no mouse)

  XXX You need an enhanced boot loader, which will committed in a few days.

  XXX std.draco should and will go away.



is
Thu May  9 16:31:50 EDT 1996
Update of /a/cvsroot/src/sys/arch/amiga/dev
In directory pain.lcs.mit.edu:/a/tmp/cvs-serv5330/dev

Modified Files:
	clock.c empsc.c grf_rh.c grf_ul.c ite.c ite_ul.c kbd.c ms.c 
	zbus.c 
Added Files:
	drsc.c 
Log Message:
First part of M68060 and DraCo support. 
  
* for the M68060 part: store buffer and branch target cache aren't
  enabled yet (this needs cleanup of lots of locore.s code which is a
  maze of little passages, all a little different) (and it wasn't yet
  tested in an accellerated Amiga, only in the DraCo).

  I've included a workaround for 2 of the CPU bugs in chips with Masks
  1F43G and earlier, but didn't bother to deal with the can of worms
  in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more
  reported at kernel startup time, or at least mention it (or the mask
  revision, if available) when reporting problems.

* for the DraCo: only machines with a CIA timer. 

  I assigned machine id 32000+nn (0x7Dnn), where n is the machine
  readable Quicklogic custom chip revision (also printed at boot
  time).  "Guaranteed to work" up to rev. 3, newer DraCo's aren't
  guaranteed to have any CIA (we don't have a driver for the new timer
  yet).

  Supported are:
    
  - MF-II keyboards on the native interface and A3000 keyboards via
    the CIA.
  - builtin SCSI interface (yet another instance of siop)
  - CIA timer.
  - Zorro II devices which don't do DMA (don't get mapped to Zorro II
    address space in the DraCo)
  - "local bus" devices which are autoconfigured by the boot rom
    (should be all); only an Altais driver is there (looks like a Retina Z3)

  Not yet supported are:

  - native timer of newer machines.
  - Real Time Clock.
  - serial, parallel + floppy on the SuperIO chip (that is also: no mouse)

  XXX You need an enhanced boot loader, which will committed in a few days.

  XXX std.draco should and will go away.



is
Thu May  9 16:31:55 EDT 1996
Update of /a/cvsroot/src/sys/arch/amiga/include
In directory pain.lcs.mit.edu:/a/tmp/cvs-serv5330/include

Modified Files:
	cpu.h mtpr.h 
Log Message:
First part of M68060 and DraCo support. 
  
* for the M68060 part: store buffer and branch target cache aren't
  enabled yet (this needs cleanup of lots of locore.s code which is a
  maze of little passages, all a little different) (and it wasn't yet
  tested in an accellerated Amiga, only in the DraCo).

  I've included a workaround for 2 of the CPU bugs in chips with Masks
  1F43G and earlier, but didn't bother to deal with the can of worms
  in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more
  reported at kernel startup time, or at least mention it (or the mask
  revision, if available) when reporting problems.

* for the DraCo: only machines with a CIA timer. 

  I assigned machine id 32000+nn (0x7Dnn), where n is the machine
  readable Quicklogic custom chip revision (also printed at boot
  time).  "Guaranteed to work" up to rev. 3, newer DraCo's aren't
  guaranteed to have any CIA (we don't have a driver for the new timer
  yet).

  Supported are:
    
  - MF-II keyboards on the native interface and A3000 keyboards via
    the CIA.
  - builtin SCSI interface (yet another instance of siop)
  - CIA timer.
  - Zorro II devices which don't do DMA (don't get mapped to Zorro II
    address space in the DraCo)
  - "local bus" devices which are autoconfigured by the boot rom
    (should be all); only an Altais driver is there (looks like a Retina Z3)

  Not yet supported are:

  - native timer of newer machines.
  - Real Time Clock.
  - serial, parallel + floppy on the SuperIO chip (that is also: no mouse)

  XXX You need an enhanced boot loader, which will committed in a few days.

  XXX std.draco should and will go away.