>I am interested in getting NetBSD on my 860T based board, and am even
>willing to take a stab at doing the interface to 10/100baseT ports
>provided on-chip.

This is my OpenblockS's boot message. :-)
(http://www.plathome.co.jp/products/openblocks/ [in Japanese])


>> OpenBlockS Boot, Revision 1.1
>> (tsubai@moeko, Sat Feb 24 03:41:18 JST 2001)
Using IP address: 192.168.253.254
root addr=192.168.253.1 path=/export/openblocks
982520+156592 [94+62928+46566]=0x131024
 start=0x10000
[ using 147032 bytes of netbsd ELF symbol table ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5Q (MPC860) #103: Tue Feb 27 00:27:49 JST 2001
    tsubai@moeko:/a/w/OpenBlockS/src/sys/arch/mpc860/compile/MPC860
total memory = 16384 KB
avail memory = 13676 KB
using 230 buffers containing 920 KB of memory
mainbus0 (root)
cpu0 at mainbus0: Version 50 (Revision 0)
pbus0 at mainbus0
scc0 at pbus0: console
fec0 at pbus0 vec 5: address 00:80:6d:47:00:c9
tqphy0 at fec0 phy 0: 78Q2120 10/100 media interface, rev. 11
tqphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
boot device: <unknown>
root on fec0
nfs_boot: trying DHCP/BOOTP
nfs_boot: BOOTP server: 192.168.253.1
nfs_boot: my_addr=192.168.253.254
nfs_boot: my_mask=255.255.255.0
root on moeko:/export/openblocks
Enter pathname of shell or RETURN for sh: 
# ifconfig -a
fec0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 00:80:6d:47:00:c9
        media: Ethernet autoselect (100baseTX)
        status: active
        inet 192.168.253.254 netmask 0xffffff00 broadcast 192.168.253.255
lo0: flags=8008<LOOPBACK,MULTICAST> mtu 33228
#