Re: Performance experiences with WRAP Boards?

[Christian Hattemer <c.hattemer%arcor.de@localhost>]

On 19.04.06 Hubert Feyrer wrote:

> I'd also like to hear comments on what "light soldering" means when
> adding  a USB card...

It seems the USB Controller is integrated in the CPU, to get it going you
just need an USB plug (and some minor stuff). The header to connect this
stuff to isn't populated on the board. You'll get one with the USB package
and have to solder it in yourself.

Also note that the available current on the port is limited to 100 mA,
unless you do some more soldering. Also the USB stuff will not fit in the
standard case.

Soekris may be the better solution if you really need USB, however it's a
lot more expensive also.

Bye, Chris