On Tue, Oct 17, 2006 at 01:31:13PM +0100, Steve Woodford wrote:
> On Tuesday 17 October 2006 12:59, Adrian Portelli wrote:
> > "The LM77 thermal sensor sits on the secondary I2C bus, at address
> > 90h."
> 
> I'm not familiar with the WRAP board, but if its I2C controller is 
> supported you should be able to do:
> 
> lmtemp0 at iic0 addr 0x90

Except that secondary I2C bus probably refers to:

lmtemp0 at iic1 addr 0x90

Again, if the I2C controller is supported.

-allen

-- 
Allen Briggs  |  http://www.ninthwonder.com/~briggs/  |  briggs@ninthwonder.com