I've been toying at Toshiba today again, and with some minor mods (thanks 
to Matthias Drochner!), we get to sysinst now. The siop driver still isn't
recognized, though, and it seems that this is due to the card wanting to
do some 64bit PCI that we don't support (So I am told :). 

I've attached the dmesg output below. Let me know if I can do any
testing/debugging!


 - Hubert

-- 
NetBSD - because Unix isn't just #include <linux.h>, i386, ELF, ...!

NetBSD 1.4Y (INSTALL) #17: Wed May 10 13:17:55 MEST 2000
    feyrer@noon:/usr/cvs.local/src-current/sys/arch/i386/compile/INSTALL
cpu0: family 6 model 7 step 3
cpu0: Intel Pentium III (686-class)
total memory = 3998 MB
avail memory = 3708 MB
using 4870 buffers containing 200 MB of memory
BIOS32 rev. 0 found at 0xfd7ee
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
siop0 at pci0 dev 8 function 0: Symbios Logic 53c810a (fast scsi)
siop0: interrupting at irq 11
scsibus0 at siop0: 8 targets, 8 luns per target
vendor 0x1013 product 0x00bc (VGA display, revision 0x23) at pci0 dev 10 function 0 not configured
vendor 0x8086 product 0x123d (8259 PIC system, interface 0x03) at pci0 dev 11 function 0 not configured
pcib0 at pci0 dev 12 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x02)
pciide0 at pci0 dev 12 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
pciide0: disabling primary channel (no drives)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
vendor 0x8086 product 0x7112 (USB serial bus, revision 0x01) at pci0 dev 12 function 2 not configured
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x02) at pci0 dev 12 function 3 not configured
pchb0 at pci0 dev 16 function 0
pchb0: vendor 0x8086 product 0x84ca (rev. 0x03)
pchb1 at pci0 dev 18 function 0
pchb1: vendor 0x8086 product 0x84cb (rev. 0x04)
pchb2 at pci0 dev 19 function 0
pchb2: vendor 0x8086 product 0x84cb (rev. 0x04)
pci1 at pchb2 bus 1
pci1: memory space enabled
siop1 at pci1 dev 3 function 0: Symbios Logic 53c896 (ultra2-wide scsi)
pci_mem_find: expected mem type 00000000, found 00000004
siop1: unable to map device registers
siop2 at pci1 dev 3 function 1: Symbios Logic 53c896 (ultra2-wide scsi)
pci_mem_find: expected mem type 00000000, found 00000004
siop2: unable to map device registers
vendor 0x1014 product 0x003e (token ring network, revision 0x68) at pci1 dev 4 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ffe5 netmask ffe5 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
siop0: target 6 now synchronous at 10.0Mhz, offset 8
cd0 at scsibus0 target 6 lun 0: <TOSHIBA, CD-ROM XM-6201TA, 1037> SCSI2 5/cdrom removable
md0: internal 1536K image area
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs