[ On Friday, August 10, 2001 at 17:30:55 (+0200), Wojciech Puchar wrote: ]
> Subject: Re: Intel STL2 board and "special" IDE
>
> > [[ moved to just tech-kern -- no need to cross-post so much... ]]
> >
> > [ On Friday, August 10, 2001 at 12:10:13 (+0200), Wojciech Puchar wrote: ]
> > > Subject: Intel STL2 board and "special" IDE
> > >
> > > what is broken with pciide? this machine has only 1 IDE channel, netbsd
> > > detects first channel right (but no DMA), detects nonexistant second.
> >
> > 1.5.1 apparently doesn't recognise the Intel ServerWorks chipset.
> 
> is it only IDE problem or other things may not work right?

I've not tried 1.5.1 on these machines....

> is it possible to turn 80Mhz on ahc?

Nope, not yet.  There was some discussion about this on one of the lists
recently....

sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST39205LW, 5063> SCSI3 0/direct fixed
sd0: 8750 MB, 19036 cyl, 2 head, 470 sec, 512 bytes/sect x 17921835 sectors
sd0: sync (25.0ns offset 63), 16-bit (80.000MB/s) transfers, tagged queueing


-- 
							Greg A. Woods

+1 416 218-0098      VE3TCP      <gwoods@acm.org>     <woods@robohack.ca>
Planix, Inc. <woods@planix.com>;   Secrets of the Weird <woods@weird.com>